diff mbox series

[1/2] dt-bindings: rockchip: k3566-quartz64-a: fix names entries, refactor

Message ID YyRxp7pDCyikNLGc@lab.hqhome163.com
State New
Headers show
Series [1/2] dt-bindings: rockchip: k3566-quartz64-a: fix names entries, refactor | expand

Commit Message

Alessandro Carminati (Red Hat) Sept. 16, 2022, 12:52 p.m. UTC
Fix esisting "No underscores in node names" general rule, and prepare for
new board versions.

Signed-off-by: Alessandro Carminati <alessandro.carminati@gmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |  2 +-
 ...-quartz64-a.dts => rk3566-quartz64-a.dtsi} | 27 ++++++++-----------
 .../dts/rockchip/rk3566-quartz64-a.usb3.dts   |  9 +++++++
 3 files changed, 21 insertions(+), 17 deletions(-)
 rename arch/arm64/boot/dts/rockchip/{rk3566-quartz64-a.dts => rk3566-quartz64-a.dtsi} (97%)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.usb3.dts

Comments

Krzysztof Kozlowski Sept. 17, 2022, 4:42 p.m. UTC | #1
On 16/09/2022 13:52, Alessandro Carminati wrote:
> Fix esisting "No underscores in node names" general rule, and prepare for

typo - existing

> new board versions.
> 
> Signed-off-by: Alessandro Carminati <alessandro.carminati@gmail.com>

Use subject prefixes matching the subsystem (git log --oneline -- ...).

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index ef79a672804a..97ec6c156346 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -59,7 +59,7 @@  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.usb3.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dtsi
similarity index 97%
rename from arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
rename to arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dtsi
index d943559b157c..ac3da5b2c1b2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dtsi
@@ -28,7 +28,7 @@  gmac1_clkin: external-gmac1-clock {
 		#clock-cells = <0>;
 	};
 
-	fan: gpio_fan {
+	fan: fan {
 		compatible = "gpio-fan";
 		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0    0
@@ -38,7 +38,7 @@  fan: gpio_fan {
 		#cooling-cells = <2>;
 	};
 
-	hdmi-con {
+	hdmi-connector {
 		compatible = "hdmi-connector";
 		type = "a";
 
@@ -116,7 +116,7 @@  simple-audio-card,codec {
 		};
 	};
 
-	vcc12v_dcin: vcc12v_dcin {
+	vcc12v_dcin: vcc12v-dcin {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc12v_dcin";
 		regulator-always-on;
@@ -139,7 +139,7 @@  vbus: vbus {
 		vin-supply = <&vcc12v_dcin>;
 	};
 
-	vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
+	vcc3v3_pcie_p: vcc3v3-p {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
@@ -151,7 +151,7 @@  vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
 		vin-supply = <&vcc_3v3>;
 	};
 
-	vcc5v0_usb: vcc5v0_usb {
+	vcc5v0_usb: vcc5v0-usb {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_usb";
 		regulator-always-on;
@@ -165,7 +165,7 @@  vcc5v0_usb: vcc5v0_usb {
 	 * the host ports are sourced from vcc5v0_usb
 	 * the otg port is sourced from vcc5v0_midu
 	 */
-	vcc5v0_usb20_host: vcc5v0_usb20_host {
+	vcc5v0_usb20_host: vcc5v0-usb20-host {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
@@ -177,7 +177,7 @@  vcc5v0_usb20_host: vcc5v0_usb20_host {
 		vin-supply = <&vcc5v0_usb>;
 	};
 
-	vcc5v0_usb20_otg: vcc5v0_usb20_otg {
+	vcc5v0_usb20_otg: vcc5v0-usb20-otg {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
@@ -187,7 +187,7 @@  vcc5v0_usb20_otg: vcc5v0_usb20_otg {
 		vin-supply = <&dcdc_boost>;
 	};
 
-	vcc3v3_sd: vcc3v3_sd {
+	vcc3v3_sd: vcc3v3-sd {
 		compatible = "regulator-fixed";
 		enable-active-low;
 		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
@@ -201,7 +201,7 @@  vcc3v3_sd: vcc3v3_sd {
 	};
 
 	/* sourced from vbus and vcc_bat+ via rk817 sw5 */
-	vcc_sys: vcc_sys {
+	vcc_sys: vcc-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
 		regulator-always-on;
@@ -212,7 +212,7 @@  vcc_sys: vcc_sys {
 	};
 
 	/* sourced from vcc_sys, sdio module operates internally at 3.3v */
-	vcc_wl: vcc_wl {
+	vcc_wl: vcc-wl {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_wl";
 		regulator-always-on;
@@ -249,7 +249,7 @@  &cpu3 {
 
 &cpu_thermal {
 	trips {
-		cpu_hot: cpu_hot {
+		cpu_hot: cpu-hot {
 			temperature = <55000>;
 			hysteresis = <2000>;
 			type = "active";
@@ -788,11 +788,6 @@  &usb_host0_xhci {
 	status = "okay";
 };
 
-/* usb3 controller is muxed with sata1 */
-&usb_host1_xhci {
-	status = "okay";
-};
-
 &usb2phy0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.usb3.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.usb3.dts
new file mode 100644
index 000000000000..1739c00ea9e9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.usb3.dts
@@ -0,0 +1,9 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-quartz64-a.dtsi"
+
+&usb_host1_xhci {
+	status = "okay";
+};