diff mbox series

[v4,13/30] thermal/drivers/hisi: Use generic thermal_zone_get_trip() function

Message ID 20220921094244.606948-14-daniel.lezcano@linaro.org
State Superseded
Headers show
Series Rework the trip points creation | expand

Commit Message

Daniel Lezcano Sept. 21, 2022, 9:42 a.m. UTC
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/hisi_thermal.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index d6974db7aaf7..45226cab466e 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -482,7 +482,7 @@  static int hisi_thermal_register_sensor(struct platform_device *pdev,
 					struct hisi_thermal_sensor *sensor)
 {
 	int ret, i;
-	const struct thermal_trip *trip;
+	struct thermal_trip trip;
 
 	sensor->tzd = devm_thermal_of_zone_register(&pdev->dev,
 						    sensor->id, sensor,
@@ -495,11 +495,12 @@  static int hisi_thermal_register_sensor(struct platform_device *pdev,
 		return ret;
 	}
 
-	trip = of_thermal_get_trip_points(sensor->tzd);
+	for (i = 0; i < thermal_zone_get_num_trips(sensor->tzd); i++) {
 
-	for (i = 0; i < of_thermal_get_ntrips(sensor->tzd); i++) {
-		if (trip[i].type == THERMAL_TRIP_PASSIVE) {
-			sensor->thres_temp = trip[i].temperature;
+		thermal_zone_get_trip(sensor->tzd, i, &trip);
+
+		if (trip.type == THERMAL_TRIP_PASSIVE) {
+			sensor->thres_temp = trip.temperature;
 			break;
 		}
 	}