diff mbox

[v3] regulator: qcom-saw2: Add support for SAW2 regulators

Message ID 1454322713-18729-1-git-send-email-georgi.djakov@linaro.org
State Superseded
Headers show

Commit Message

Georgi Djakov Feb. 1, 2016, 10:31 a.m. UTC
The SAW2 (Subsystem Power Manager and Adaptive Voltage Scaling Wrapper 2)
is part of the SPM subsystem. It is a hardware block in the Qualcomm
chipsets that regulates the power to the CPU cores on platform such as
apq8064, msm8974, apq8084 and others.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>

---

Changes since v2 (https://lkml.org/lkml/2016/1/28/481)
 * Address the comments from Mark. Thanks!
 - Implement regulator_get_voltage_sel() instead of regulator_get_voltage()
 - Add cpu_relax() in the loop
 - Specify ramp_delay
 - Drop the legacy "regulator-name" property

Changes since v1 (https://lkml.org/lkml/2015/12/18/629)
 * Move into a separate regulator driver

 .../bindings/regulator/qcom,saw2-regulator.txt     |   31 +++
 drivers/regulator/Kconfig                          |   12 +
 drivers/regulator/Makefile                         |    1 +
 drivers/regulator/qcom_saw2-regulator.c            |  229 ++++++++++++++++++++
 4 files changed, 273 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/qcom,saw2-regulator.txt
 create mode 100644 drivers/regulator/qcom_saw2-regulator.c

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Georgi Djakov Feb. 3, 2016, 5:28 p.m. UTC | #1
On 02/01/2016 12:31 PM, Georgi Djakov wrote:
> The SAW2 (Subsystem Power Manager and Adaptive Voltage Scaling Wrapper 2)

> is part of the SPM subsystem. It is a hardware block in the Qualcomm

> chipsets that regulates the power to the CPU cores on platform such as

> apq8064, msm8974, apq8084 and others.

> 

> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>

> ---

[..]

> +config REGULATOR_QCOM_SAW2

> +	tristate "Qualcomm SAW2 regulator driver"

> +	depends on ARCH_QCOM


This should be:
	depends on (ARCH_QCOM || COMPILE_TEST) && MFD_SYSCON

I plan to re-send after a few more days and also change the name of the
driver from SAW2 to SAW, as we can add support for other generations
than just 2.

> +	help

> +	  If you say yes to this option, support will be included for the

> +	  regulators providing power to the CPU cores on devices such as

> +	  APQ8064.

> +

> +	  Say M here if you want to include support for the CPU core voltage

> +	  regulators as a module. The module will be named

> +	  "qcom_saw2-regulator".

> +


--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/regulator/qcom,saw2-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,saw2-regulator.txt
new file mode 100644
index 000000000000..6df5a32ff9fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,saw2-regulator.txt
@@ -0,0 +1,31 @@ 
+Qualcomm SAW2 Regulators
+
+SAW2 (Subsystem Power Manager and Adaptive Voltage Scaling Wrapper) is a hardware
+block in the Qualcomm chipsets that regulates the power to the CPU cores on devices
+such as APQ8064, MSM8974, APQ8084 and others.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+			"qcom,apq8064-saw2-v1.1-regulator"
+
+Example:
+                saw0: power-controller@2089000 {
+			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2", "syscon", "simple-mfd";
+                        reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			saw0_regulator: regulator@2089000 {
+				compatible = "qcom,apq8064-saw2-v1.1-regulator";
+				regulator-always-on;
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1250000>;
+			};
+		};
+
+
+		&CPU0 {
+			cpu-supply = <&saw0_regulator>;
+		};
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 74a6354eaefa..50f70d94d01b 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -558,6 +558,18 @@  config REGULATOR_QCOM_RPM
 	  Qualcomm RPM as a module. The module will be named
 	  "qcom_rpm-regulator".
 
+config REGULATOR_QCOM_SAW2
+	tristate "Qualcomm SAW2 regulator driver"
+	depends on ARCH_QCOM
+	help
+	  If you say yes to this option, support will be included for the
+	  regulators providing power to the CPU cores on devices such as
+	  APQ8064.
+
+	  Say M here if you want to include support for the CPU core voltage
+	  regulators as a module. The module will be named
+	  "qcom_saw2-regulator".
+
 config REGULATOR_QCOM_SMD_RPM
 	tristate "Qualcomm SMD based RPM regulator driver"
 	depends on QCOM_SMD_RPM
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 348cfd727350..371ce2c36fec 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -64,6 +64,7 @@  obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
+obj-$(CONFIG_REGULATOR_QCOM_SAW2)+= qcom_saw2-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
diff --git a/drivers/regulator/qcom_saw2-regulator.c b/drivers/regulator/qcom_saw2-regulator.c
new file mode 100644
index 000000000000..5ab74a1745aa
--- /dev/null
+++ b/drivers/regulator/qcom_saw2-regulator.c
@@ -0,0 +1,229 @@ 
+/*
+ * Copyright (c) 2016, Linaro Limited. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+#define	SPM_REG_STS_1			0x10
+#define	SPM_REG_VCTL			0x14
+#define	SPM_REG_PMIC_DATA_0		0x28
+#define	SPM_REG_PMIC_DATA_1		0x2c
+#define	SPM_REG_RST			0x30
+
+struct saw2_vreg {
+	struct device		*dev;
+	struct regmap		*regmap;
+	struct regulator_desc	rdesc;
+	struct regulator_dev	*rdev;
+	unsigned int		sel;
+};
+
+struct spm_vlevel_data {
+	struct saw2_vreg *vreg;
+	unsigned int sel;
+};
+
+static int saw2_regulator_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct saw2_vreg *vreg = rdev_get_drvdata(rdev);
+
+	return vreg->sel;
+}
+
+static void smp_set_vdd(void *data)
+{
+	struct spm_vlevel_data *vdata = (struct spm_vlevel_data *)data;
+	struct saw2_vreg *vreg = vdata->vreg;
+	unsigned long new_sel = vdata->sel;
+	u32 val, new_val;
+	u32 vctl, data0, data1;
+	unsigned long timeout;
+
+	if (vreg->sel == new_sel)
+		return;
+
+	regmap_read(vreg->regmap, SPM_REG_VCTL, &vctl);
+	regmap_read(vreg->regmap, SPM_REG_PMIC_DATA_0, &data0);
+	regmap_read(vreg->regmap, SPM_REG_PMIC_DATA_1, &data1);
+
+	/* select the band */
+	val = 0x80 | new_sel;
+
+	vctl &= ~0xff;
+	vctl |= val;
+
+	data0 &= ~0xff;
+	data0 |= val;
+
+	data1 &= ~0x3f;
+	data1 |= val & 0x3f;
+	data1 &= ~0x3f0000;
+	data1 |= ((val & 0x3f) << 16);
+
+	regmap_write(vreg->regmap, SPM_REG_RST, 1);
+	regmap_write(vreg->regmap, SPM_REG_VCTL, vctl);
+	regmap_write(vreg->regmap, SPM_REG_PMIC_DATA_0, data0);
+	regmap_write(vreg->regmap, SPM_REG_PMIC_DATA_1, data1);
+
+	timeout = jiffies + usecs_to_jiffies(50);
+	do {
+		regmap_read(vreg->regmap, SPM_REG_STS_1, &new_val);
+		new_val &= 0xff;
+		if (new_val == val) {
+			vreg->sel = new_sel;
+			return;
+		}
+
+		cpu_relax();
+
+	} while (time_before(jiffies, timeout));
+
+	pr_err("%s: Voltage not changed: %#x\n", __func__, new_val);
+}
+
+static int saw2_regulator_set_voltage_sel(struct regulator_dev *rdev,
+					  unsigned selector)
+{
+	struct saw2_vreg *vreg = rdev_get_drvdata(rdev);
+	struct spm_vlevel_data data;
+	int cpu = rdev_get_id(rdev);
+
+	data.vreg = vreg;
+	data.sel = selector;
+
+	return smp_call_function_single(cpu, smp_set_vdd, &data, true);
+}
+
+static struct regulator_ops saw2_regulator_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.set_voltage_sel = saw2_regulator_set_voltage_sel,
+	.get_voltage_sel = saw2_regulator_get_voltage_sel,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static struct regulator_desc saw2_regulator = {
+	.owner = THIS_MODULE,
+	.type = REGULATOR_VOLTAGE,
+	.ops  = &saw2_regulator_ops,
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(700000, 0, 56, 12500),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 57,
+	.ramp_delay = 1250, /* PMIC internal slew rate is 1250 uV/us */
+};
+
+static struct saw2_vreg *saw2_get_drv(struct platform_device *pdev,
+				      int *vreg_cpu)
+{
+	struct saw2_vreg *vreg = NULL;
+	struct device_node *cpu_node, *saw_node;
+	int cpu;
+	bool found;
+
+	for_each_possible_cpu(cpu) {
+		cpu_node = of_cpu_device_node_get(cpu);
+		if (!cpu_node)
+			continue;
+		saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
+		found = (saw_node == pdev->dev.of_node->parent);
+		of_node_put(saw_node);
+		of_node_put(cpu_node);
+		if (found)
+			break;
+	}
+
+	if (found) {
+		vreg = devm_kzalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
+		if (vreg)
+			*vreg_cpu = cpu;
+	}
+
+	return vreg;
+}
+
+static const struct of_device_id qcom_saw2_regulator_match[] = {
+	{ .compatible = "qcom,apq8064-saw2-v1.1-regulator" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_saw2_regulator_match);
+
+static int qcom_saw2_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *saw2_np;
+	struct saw2_vreg *vreg;
+	struct regulator_config config = { };
+	int ret = 0, cpu = 0;
+	char name[] = "kraitXX";
+
+	vreg = saw2_get_drv(pdev, &cpu);
+	if (!vreg)
+		return -EINVAL;
+
+	saw2_np = of_get_parent(np);
+	if (!saw2_np)
+		return -ENODEV;
+
+	vreg->regmap = syscon_node_to_regmap(saw2_np);
+	of_node_put(saw2_np);
+	if (IS_ERR(config.regmap))
+		return PTR_ERR(config.regmap);
+
+	snprintf(name, sizeof(name), "krait%d", cpu);
+
+	config.regmap = vreg->regmap;
+	config.dev = &pdev->dev;
+	config.of_node = np;
+	config.driver_data = vreg;
+
+	vreg->rdesc = saw2_regulator;
+	vreg->rdesc.id = cpu;
+	vreg->rdesc.name = name;
+	config.init_data = of_get_regulator_init_data(&pdev->dev,
+						      pdev->dev.of_node,
+						      &vreg->rdesc);
+
+	vreg->rdev = devm_regulator_register(&pdev->dev, &vreg->rdesc, &config);
+	if (IS_ERR(vreg->rdev)) {
+		ret = PTR_ERR(vreg->rdev);
+		dev_err(dev, "error registering SAW2 regulator: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver qcom_saw2_regulator_driver = {
+	.driver = {
+		.name = "qcom-saw2-regulator",
+		.of_match_table = qcom_saw2_regulator_match,
+	},
+	.probe = qcom_saw2_regulator_probe,
+};
+
+module_platform_driver(qcom_saw2_regulator_driver);
+
+MODULE_ALIAS("platform:qcom-saw2-regulator");
+MODULE_DESCRIPTION("Qualcomm SAW2 regulator driver");
+MODULE_AUTHOR("Georgi Djakov <georgi.djakov@linaro.org>");
+MODULE_LICENSE("GPL v2");