diff mbox series

ARM: dts: qcom: pmx65: use node name "gpio" for spmi-gpio

Message ID 20220925190622.111505-1-luca@z3ntu.xyz
State Accepted
Commit da76bc88bde1dc3f547078282e30a88c371699ad
Headers show
Series ARM: dts: qcom: pmx65: use node name "gpio" for spmi-gpio | expand

Commit Message

Luca Weiss Sept. 25, 2022, 7:06 p.m. UTC 
All other usages of qcom,spmi-gpio use the gpio@ node name, and this is
also validated by the dt binding check. Fix it.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 arch/arm/boot/dts/qcom-pmx65.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom-pmx65.dtsi
index abf229a8b75a..1c7fdf59c1f5 100644
--- a/arch/arm/boot/dts/qcom-pmx65.dtsi
+++ b/arch/arm/boot/dts/qcom-pmx65.dtsi
@@ -20,7 +20,7 @@  pmx65_temp: temp-alarm@a00 {
 			#thermal-sensor-cells = <0>;
 		};
 
-		pmx65_gpios: pinctrl@8800 {
+		pmx65_gpios: gpio@8800 {
 			compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
 			gpio-controller;