diff mbox series

[v2,02/36] gpiolib: cdev: Add missed header(s)

Message ID 20221010201453.77401-3-andriy.shevchenko@linux.intel.com
State New
Headers show
Series pinctrl: Clean up and add missed headers | expand

Commit Message

Andy Shevchenko Oct. 10, 2022, 8:14 p.m. UTC
Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/gpio/gpiolib-cdev.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

Comments

Kent Gibson Oct. 11, 2022, 12:01 a.m. UTC | #1
On Mon, Oct 10, 2022 at 11:14:18PM +0300, Andy Shevchenko wrote:
> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
> 
> While at it, sort headers alphabetically.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/gpio/gpiolib-cdev.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
> index f8041d4898d1..60a60e2d60c5 100644
> --- a/drivers/gpio/gpiolib-cdev.c
> +++ b/drivers/gpio/gpiolib-cdev.c
> @@ -10,8 +10,9 @@
>  #include <linux/device.h>
>  #include <linux/err.h>
>  #include <linux/file.h>
> -#include <linux/gpio.h>
>  #include <linux/gpio/driver.h>
> +#include <linux/gpio.h>
> +#include <linux/hte.h>

Ok with the hte re-order.

But moving the gpio subsystem header after the gpio/driver is not
alphabetical ('.' precedes '/') and it read better and made more sense
to me the way it was.

>  #include <linux/interrupt.h>
>  #include <linux/irqreturn.h>
>  #include <linux/kernel.h>
> @@ -20,11 +21,12 @@
>  #include <linux/mutex.h>
>  #include <linux/pinctrl/consumer.h>
>  #include <linux/poll.h>
> +#include <linux/seq_file.h>

I wasn't aware that we use anything from seq_file.
What am I missing?

Cheers,
Kent.

>  #include <linux/spinlock.h>
>  #include <linux/timekeeping.h>
>  #include <linux/uaccess.h>
>  #include <linux/workqueue.h>
> -#include <linux/hte.h>
> +
>  #include <uapi/linux/gpio.h>
>  
>  #include "gpiolib.h"
> -- 
> 2.35.1
>
Andy Shevchenko Oct. 11, 2022, 8:05 a.m. UTC | #2
On Tue, Oct 11, 2022 at 3:02 AM Kent Gibson <warthog618@gmail.com> wrote:
> On Mon, Oct 10, 2022 at 11:14:18PM +0300, Andy Shevchenko wrote:

...

> > -#include <linux/gpio.h>
> >  #include <linux/gpio/driver.h>
> > +#include <linux/gpio.h>
> > +#include <linux/hte.h>
>
> Ok with the hte re-order.
>
> But moving the gpio subsystem header after the gpio/driver is not
> alphabetical ('.' precedes '/') and it read better and made more sense
> to me the way it was.

I see, I guess this is vim sort vs shell sort. Strange, they should
follow the locale settings...

...

> > +#include <linux/seq_file.h>
>
> I wasn't aware that we use anything from seq_file.
> What am I missing?

I will recheck, because in v6.0 I don't see anything, but LKP was not
okay with something IIRC.




--
With Best Regards,
Andy Shevchenko
Andy Shevchenko Oct. 11, 2022, 1:48 p.m. UTC | #3
On Tue, Oct 11, 2022 at 11:05:42AM +0300, Andy Shevchenko wrote:
> On Tue, Oct 11, 2022 at 3:02 AM Kent Gibson <warthog618@gmail.com> wrote:
> > On Mon, Oct 10, 2022 at 11:14:18PM +0300, Andy Shevchenko wrote:

...

> > > -#include <linux/gpio.h>
> > >  #include <linux/gpio/driver.h>
> > > +#include <linux/gpio.h>
> > > +#include <linux/hte.h>
> >
> > Ok with the hte re-order.
> >
> > But moving the gpio subsystem header after the gpio/driver is not
> > alphabetical ('.' precedes '/') and it read better and made more sense
> > to me the way it was.
> 
> I see, I guess this is vim sort vs shell sort. Strange, they should
> follow the locale settings...

I have checked, the shell and vim sort gave the same result as in this patch.
Kent Gibson Oct. 11, 2022, 2:13 p.m. UTC | #4
On Tue, Oct 11, 2022 at 04:48:17PM +0300, Andy Shevchenko wrote:
> On Tue, Oct 11, 2022 at 11:05:42AM +0300, Andy Shevchenko wrote:
> > On Tue, Oct 11, 2022 at 3:02 AM Kent Gibson <warthog618@gmail.com> wrote:
> > > On Mon, Oct 10, 2022 at 11:14:18PM +0300, Andy Shevchenko wrote:
> 
> ...
> 
> > > > -#include <linux/gpio.h>
> > > >  #include <linux/gpio/driver.h>
> > > > +#include <linux/gpio.h>
> > > > +#include <linux/hte.h>
> > >
> > > Ok with the hte re-order.
> > >
> > > But moving the gpio subsystem header after the gpio/driver is not
> > > alphabetical ('.' precedes '/') and it read better and made more sense
> > > to me the way it was.
> > 
> > I see, I guess this is vim sort vs shell sort. Strange, they should
> > follow the locale settings...
> 
> I have checked, the shell and vim sort gave the same result as in this patch.
> 

The original order (sans hte.h) was done by VSCode Sort Lines Ascending,
and that still returns the same result.  That matches what I would
expect to see given the content of the text.

And for me vim also gives the original order.

Just to confirm - is '.' 0x2e and '/' 0x2f in your universe?

Cheers,
Kent.
Andy Shevchenko Oct. 11, 2022, 2:28 p.m. UTC | #5
On Tue, Oct 11, 2022 at 10:13:02PM +0800, Kent Gibson wrote:
> On Tue, Oct 11, 2022 at 04:48:17PM +0300, Andy Shevchenko wrote:
> > On Tue, Oct 11, 2022 at 11:05:42AM +0300, Andy Shevchenko wrote:
> > > On Tue, Oct 11, 2022 at 3:02 AM Kent Gibson <warthog618@gmail.com> wrote:
> > > > On Mon, Oct 10, 2022 at 11:14:18PM +0300, Andy Shevchenko wrote:

...

> > > > > -#include <linux/gpio.h>
> > > > >  #include <linux/gpio/driver.h>
> > > > > +#include <linux/gpio.h>
> > > > > +#include <linux/hte.h>
> > > >
> > > > Ok with the hte re-order.
> > > >
> > > > But moving the gpio subsystem header after the gpio/driver is not
> > > > alphabetical ('.' precedes '/') and it read better and made more sense
> > > > to me the way it was.
> > > 
> > > I see, I guess this is vim sort vs shell sort. Strange, they should
> > > follow the locale settings...
> > 
> > I have checked, the shell and vim sort gave the same result as in this patch.
> > 
> 
> The original order (sans hte.h) was done by VSCode Sort Lines Ascending,
> and that still returns the same result.  That matches what I would
> expect to see given the content of the text.
> 
> And for me vim also gives the original order.
> 
> Just to confirm - is '.' 0x2e and '/' 0x2f in your universe?

$ LC_COLLATE=C sort test1.txt
#include <linux/gpio.h>
#include <linux/gpio/driver.h>

$ LC_COLLATE= sort test1.txt
#include <linux/gpio/driver.h>
#include <linux/gpio.h>

I guess this explains the difference. Currently I have en_US.UTF-8.
Geert Uytterhoeven Oct. 11, 2022, 2:39 p.m. UTC | #6
Hi Andy,

On Tue, Oct 11, 2022 at 4:31 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
> On Tue, Oct 11, 2022 at 10:13:02PM +0800, Kent Gibson wrote:
> > On Tue, Oct 11, 2022 at 04:48:17PM +0300, Andy Shevchenko wrote:
> > > On Tue, Oct 11, 2022 at 11:05:42AM +0300, Andy Shevchenko wrote:
> > > > On Tue, Oct 11, 2022 at 3:02 AM Kent Gibson <warthog618@gmail.com> wrote:
> > > > > On Mon, Oct 10, 2022 at 11:14:18PM +0300, Andy Shevchenko wrote:
>
> ...
>
> > > > > > -#include <linux/gpio.h>
> > > > > >  #include <linux/gpio/driver.h>
> > > > > > +#include <linux/gpio.h>
> > > > > > +#include <linux/hte.h>
> > > > >
> > > > > Ok with the hte re-order.
> > > > >
> > > > > But moving the gpio subsystem header after the gpio/driver is not
> > > > > alphabetical ('.' precedes '/') and it read better and made more sense
> > > > > to me the way it was.
> > > >
> > > > I see, I guess this is vim sort vs shell sort. Strange, they should
> > > > follow the locale settings...
> > >
> > > I have checked, the shell and vim sort gave the same result as in this patch.
> > >
> >
> > The original order (sans hte.h) was done by VSCode Sort Lines Ascending,
> > and that still returns the same result.  That matches what I would
> > expect to see given the content of the text.
> >
> > And for me vim also gives the original order.
> >
> > Just to confirm - is '.' 0x2e and '/' 0x2f in your universe?
>
> $ LC_COLLATE=C sort test1.txt
> #include <linux/gpio.h>
> #include <linux/gpio/driver.h>
>
> $ LC_COLLATE= sort test1.txt
> #include <linux/gpio/driver.h>
> #include <linux/gpio.h>
>
> I guess this explains the difference. Currently I have en_US.UTF-8.

Throwing my can of paint into the mix...

I think it is more logical to first include the general <linux/gpio.h>,
followed by whatever <linux/gpio-foo.h> and <linux/gpio/bar.h>,
irrespective of (language-specific or phonebook) sort order.

Yeah, it sucks that this requires some manual work after running sort...

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Andy Shevchenko Oct. 11, 2022, 3:19 p.m. UTC | #7
On Tue, Oct 11, 2022 at 04:39:46PM +0200, Geert Uytterhoeven wrote:
> On Tue, Oct 11, 2022 at 4:31 PM Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
> > On Tue, Oct 11, 2022 at 10:13:02PM +0800, Kent Gibson wrote:
> > > On Tue, Oct 11, 2022 at 04:48:17PM +0300, Andy Shevchenko wrote:
> > > > On Tue, Oct 11, 2022 at 11:05:42AM +0300, Andy Shevchenko wrote:
> > > > > On Tue, Oct 11, 2022 at 3:02 AM Kent Gibson <warthog618@gmail.com> wrote:
> > > > > > On Mon, Oct 10, 2022 at 11:14:18PM +0300, Andy Shevchenko wrote:

...

> > > > > > > -#include <linux/gpio.h>
> > > > > > >  #include <linux/gpio/driver.h>
> > > > > > > +#include <linux/gpio.h>
> > > > > > > +#include <linux/hte.h>
> > > > > >
> > > > > > Ok with the hte re-order.
> > > > > >
> > > > > > But moving the gpio subsystem header after the gpio/driver is not
> > > > > > alphabetical ('.' precedes '/') and it read better and made more sense
> > > > > > to me the way it was.
> > > > >
> > > > > I see, I guess this is vim sort vs shell sort. Strange, they should
> > > > > follow the locale settings...
> > > >
> > > > I have checked, the shell and vim sort gave the same result as in this patch.
> > > >
> > >
> > > The original order (sans hte.h) was done by VSCode Sort Lines Ascending,
> > > and that still returns the same result.  That matches what I would
> > > expect to see given the content of the text.
> > >
> > > And for me vim also gives the original order.
> > >
> > > Just to confirm - is '.' 0x2e and '/' 0x2f in your universe?
> >
> > $ LC_COLLATE=C sort test1.txt
> > #include <linux/gpio.h>
> > #include <linux/gpio/driver.h>
> >
> > $ LC_COLLATE= sort test1.txt
> > #include <linux/gpio/driver.h>
> > #include <linux/gpio.h>
> >
> > I guess this explains the difference. Currently I have en_US.UTF-8.
> 
> Throwing my can of paint into the mix...
> 
> I think it is more logical to first include the general <linux/gpio.h>,
> followed by whatever <linux/gpio-foo.h> and <linux/gpio/bar.h>,
> irrespective of (language-specific or phonebook) sort order.
> 
> Yeah, it sucks that this requires some manual work after running sort...

It seems that kind of issue is in this patch only.
Andy Shevchenko Oct. 11, 2022, 3:44 p.m. UTC | #8
On Tue, Oct 11, 2022 at 06:19:13PM +0300, Andy Shevchenko wrote:
> On Tue, Oct 11, 2022 at 04:39:46PM +0200, Geert Uytterhoeven wrote:

...

After all this patch is not needed. However, during checking of the necessity
of this patch I realized that seq_file is used in a few GPIO drivers without
any actual users, so I will prepare clean up series for that as well.
diff mbox series

Patch

diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index f8041d4898d1..60a60e2d60c5 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -10,8 +10,9 @@ 
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/file.h>
-#include <linux/gpio.h>
 #include <linux/gpio/driver.h>
+#include <linux/gpio.h>
+#include <linux/hte.h>
 #include <linux/interrupt.h>
 #include <linux/irqreturn.h>
 #include <linux/kernel.h>
@@ -20,11 +21,12 @@ 
 #include <linux/mutex.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/poll.h>
+#include <linux/seq_file.h>
 #include <linux/spinlock.h>
 #include <linux/timekeeping.h>
 #include <linux/uaccess.h>
 #include <linux/workqueue.h>
-#include <linux/hte.h>
+
 #include <uapi/linux/gpio.h>
 
 #include "gpiolib.h"