diff mbox series

[v2,7/7] power: supply: bq25890: Add Vsys regulator

Message ID 20221014172427.128512-7-marex@denx.de
State Accepted
Commit 14a3d159abf8f6013d40723856283705253e7e9a
Headers show
Series [v2,1/7] power: supply: bq25890: Document POWER_SUPPLY_PROP_CURRENT_NOW | expand

Commit Message

Marek Vasut Oct. 14, 2022, 5:24 p.m. UTC
The chip is capable of reporting Vsys voltage supplied to the system.
Add regulator which represents the Vsys supply. This can be used e.g.
as a supply for system PMIC input.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
To: linux-pm@vger.kernel.org
---
V2: Add RB from Hans
---
 drivers/power/supply/bq25890_charger.c | 32 ++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)
diff mbox series

Patch

diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
index ad5811304f88a..f0362dcb935e9 100644
--- a/drivers/power/supply/bq25890_charger.c
+++ b/drivers/power/supply/bq25890_charger.c
@@ -1102,6 +1102,20 @@  static int bq25890_vbus_get_voltage(struct regulator_dev *rdev)
 	return bq25890_get_vbus_voltage(bq);
 }
 
+static int bq25890_vsys_get_voltage(struct regulator_dev *rdev)
+{
+	struct bq25890_device *bq = rdev_get_drvdata(rdev);
+	int ret;
+
+	/* Should be some output voltage ? */
+	ret = bq25890_field_read(bq, F_SYSV); /* read measured value */
+	if (ret < 0)
+		return ret;
+
+	/* converted_val = 2.304V + ADC_val * 20mV (table 10.3.15) */
+	return 2304000 + ret * 20000;
+}
+
 static const struct regulator_ops bq25890_vbus_ops = {
 	.enable = bq25890_vbus_enable,
 	.disable = bq25890_vbus_disable,
@@ -1117,6 +1131,18 @@  static const struct regulator_desc bq25890_vbus_desc = {
 	.ops = &bq25890_vbus_ops,
 };
 
+static const struct regulator_ops bq25890_vsys_ops = {
+	.get_voltage = bq25890_vsys_get_voltage,
+};
+
+static const struct regulator_desc bq25890_vsys_desc = {
+	.name = "vsys",
+	.of_match = "vsys",
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+	.ops = &bq25890_vsys_ops,
+};
+
 static int bq25890_register_regulator(struct bq25890_device *bq)
 {
 	struct bq25890_platform_data *pdata = dev_get_platdata(bq->dev);
@@ -1135,6 +1161,12 @@  static int bq25890_register_regulator(struct bq25890_device *bq)
 				     "registering vbus regulator");
 	}
 
+	reg = devm_regulator_register(bq->dev, &bq25890_vsys_desc, &cfg);
+	if (IS_ERR(reg)) {
+		return dev_err_probe(bq->dev, PTR_ERR(reg),
+				     "registering vsys regulator");
+	}
+
 	return 0;
 }
 #else