diff mbox series

[v5,17/34] dt-bindings: pinctrl: qcom,msm8226: fix indentation in example

Message ID 20221016170035.35014-18-krzysztof.kozlowski@linaro.org
State Accepted
Commit 1780bac7c11c341f99ab10a83ede9e96464c5f91
Headers show
Series [v5,01/34] arm64: dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins | expand

Commit Message

Krzysztof Kozlowski Oct. 16, 2022, 5 p.m. UTC 
Bindings example should be indented with 4-spaces.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../pinctrl/qcom,msm8226-pinctrl.yaml         | 36 +++++++++----------
 1 file changed, 18 insertions(+), 18 deletions(-)

Comments

Krzysztof Kozlowski Oct. 17, 2022, 8:07 p.m. UTC | #1 
On Sun, 16 Oct 2022 13:00:18 -0400, Krzysztof Kozlowski wrote:
> Bindings example should be indented with 4-spaces.
> 
> 

Applied, thanks!

[17/34] dt-bindings: pinctrl: qcom,msm8226: fix indentation in example
        https://git.kernel.org/krzk/linux-dt/c/1780bac7c11c341f99ab10a83ede9e96464c5f91

Best regards,
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
index 1d89bc85c3d9..6d56d2ef1242 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -94,22 +94,22 @@  additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        msmgpio: pinctrl@fd510000 {
-                compatible = "qcom,msm8226-pinctrl";
-                reg = <0xfd510000 0x4000>;
-
-                gpio-controller;
-                #gpio-cells = <2>;
-                gpio-ranges = <&msmgpio 0 0 117>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-
-                serial-state {
-                        pins = "gpio8", "gpio9";
-                        function = "blsp_uart3";
-                        drive-strength = <8>;
-                        bias-disable;
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    msmgpio: pinctrl@fd510000 {
+        compatible = "qcom,msm8226-pinctrl";
+        reg = <0xfd510000 0x4000>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&msmgpio 0 0 117>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        serial-state {
+            pins = "gpio8", "gpio9";
+            function = "blsp_uart3";
+            drive-strength = <8>;
+            bias-disable;
         };
+    };