diff mbox series

[02/10] arm64: dts: ti: k3-am62: Enable I2C nodes at the board level

Message ID 20221018211533.21335-3-afd@ti.com
State Accepted
Commit a1541a08bbf9d02f842801261d0dd4505bcd29e0
Headers show
Series None | expand

Commit Message

Andrew Davis Oct. 18, 2022, 9:15 p.m. UTC
I2C nodes defined in the top-level AM62x SoC dtsi files are incomplete
and will not be functional unless they are extended with pinmux
information.

As the pinmux is only known at the board integration level, these
nodes should only be enabled when provided with this information.

Disable the I2C nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi   |  4 ++++
 arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi    |  1 +
 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi |  1 +
 arch/arm64/boot/dts/ti/k3-am625-sk.dts     | 18 ++----------------
 4 files changed, 8 insertions(+), 16 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index f6f8ccdb5f55..295c9bb22e7d 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -271,6 +271,7 @@  main_i2c0: i2c@20000000 {
 		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 102 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c1: i2c@20010000 {
@@ -282,6 +283,7 @@  main_i2c1: i2c@20010000 {
 		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 103 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c2: i2c@20020000 {
@@ -293,6 +295,7 @@  main_i2c2: i2c@20020000 {
 		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 104 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c3: i2c@20030000 {
@@ -304,6 +307,7 @@  main_i2c3: i2c@20030000 {
 		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 105 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_spi0: spi@20100000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
index 8dff39723628..7f715ebe8e24 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
@@ -33,6 +33,7 @@  mcu_i2c0: i2c@4900000 {
 		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 106 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	mcu_spi0: spi@4b00000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
index 94cfc549f644..ff936d547c99 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -38,5 +38,6 @@  wkup_i2c0: i2c@2b200000 {
 		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 107 4>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index 0c7b25213e97..c280d6c00412 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -293,21 +293,15 @@  &main_uart1 {
 	status = "reserved";
 };
 
-&mcu_i2c0 {
-	status = "disabled";
-};
-
-&wkup_i2c0 {
-	status = "disabled";
-};
-
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
 };
 
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
@@ -340,14 +334,6 @@  exp1: gpio@22 {
 	};
 };
 
-&main_i2c2 {
-	status = "disabled";
-};
-
-&main_i2c3 {
-	status = "disabled";
-};
-
 &sdhci0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;