diff mbox series

[1/2,v1] usb: phy: phy-gpio-vbus-usb: Add devicetree bindings

Message ID 20221022121149.3329641-1-linus.walleij@linaro.org
State New
Headers show
Series [1/2,v1] usb: phy: phy-gpio-vbus-usb: Add devicetree bindings | expand

Commit Message

Linus Walleij Oct. 22, 2022, 12:11 p.m. UTC
This adds a simple device tree binding for a GPIO-based
VBUS detection PHY.

Cc: Felipe Balbi <balbi@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 .../bindings/phy/phy-usb-vbus-gpio.yaml       | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-usb-vbus-gpio.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/phy-usb-vbus-gpio.yaml b/Documentation/devicetree/bindings/phy/phy-usb-vbus-gpio.yaml
new file mode 100644
index 000000000000..4e10b58f8235
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-usb-vbus-gpio.yaml
@@ -0,0 +1,47 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-usb-vbus-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO-based VBUS detection USB PHY
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: A VBUS event occurs when a USB plug is attached to
+  a USB host and peripheral, the voltage (VBUS) is exposed from the
+  host to the peripheral when the last of the two ends of the
+  cable is plugged in. This can be either on the host side or on
+  the peripheral side, whichever comes last. It is possible to
+  provide a very simple USB VBUS detection mechanism by using a
+  GPIO line that will trigger on an edge event on the VBUS
+  pin.
+
+properties:
+  compatible:
+    const: phy-usb-vbus-gpio
+
+  "#phy-cells":
+    const: 0
+
+  vbus-gpios:
+    maxItems: 1
+    description: The GPIO line connected to VBUS
+
+required:
+  - compatible
+  - "#phy-cells"
+  - vbus-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb1_phy: phy {
+        compatible = "phy-usb-vbus-gpio";
+        #phy-cells = <0>;
+        vbus-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+    };