[RFC,v3,13/15] vfio/type1: also check IRQ remapping capability at msi domain

Message ID 1455264797-2334-14-git-send-email-eric.auger@linaro.org
State New
Headers show

Commit Message

Auger Eric Feb. 12, 2016, 8:13 a.m.
On x86 IRQ remapping is abstracted by the IOMMU. On ARM this is abstracted
by the msi controller. vfio_msi_parent_irq_remapping_capable allows to
check whether interrupts are "safe" for a given device. There are if the device
does not use MSI or if the device uses MSI and the msi-parent controller
supports IRQ remapping.

Then we check at group level if all devices have safe interrupts: if not
only allow the group to be attached if allow_unsafe_interrupts is set.

At this point ARM sMMU still advertises IOMMU_CAP_INTR_REMAP. This is
changed in next patch.

Signed-off-by: Eric Auger <eric.auger@linaro.org>


---

v2 -> v3:
- protect vfio_msi_parent_irq_remapping_capable with
  CONFIG_GENERIC_MSI_IRQ_DOMAIN
---
 drivers/vfio/vfio_iommu_type1.c | 39 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)

-- 
1.9.1

Patch

diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
index c5d3b48..3afb815 100644
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -36,6 +36,8 @@ 
 #include <linux/uaccess.h>
 #include <linux/vfio.h>
 #include <linux/workqueue.h>
+#include <linux/irqdomain.h>
+#include <linux/msi.h>
 
 #define DRIVER_VERSION  "0.2"
 #define DRIVER_AUTHOR   "Alex Williamson <alex.williamson@redhat.com>"
@@ -754,6 +756,32 @@  static int vfio_bus_type(struct device *dev, void *data)
 	return 0;
 }
 
+/**
+ * vfio_msi_parent_irq_remapping_capable: returns whether the device msi-parent
+ * controller supports IRQ remapping, aka interrupt translation
+ *
+ * @dev: device handle
+ * @data: unused
+ * returns 0 if irq remapping is supported or -1 if not supported.
+ */
+static int vfio_msi_parent_irq_remapping_capable(struct device *dev, void *data)
+{
+#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
+	struct irq_domain *domain;
+	struct msi_domain_info *info;
+
+	domain = dev_get_msi_domain(dev);
+	if (!domain)
+		return 0;
+
+	info = msi_get_domain_info(domain);
+
+	if (!(info->flags & MSI_FLAG_IRQ_REMAPPING))
+		return -1;
+#endif
+	return 0;
+}
+
 static int vfio_iommu_replay(struct vfio_iommu *iommu,
 			     struct vfio_domain *domain)
 {
@@ -848,7 +876,7 @@  static int vfio_iommu_type1_attach_group(void *iommu_data,
 	struct vfio_group *group, *g;
 	struct vfio_domain *domain, *d;
 	struct bus_type *bus = NULL;
-	int ret;
+	int ret, irq_remapping;
 
 	mutex_lock(&iommu->lock);
 
@@ -871,6 +899,13 @@  static int vfio_iommu_type1_attach_group(void *iommu_data,
 
 	group->iommu_group = iommu_group;
 
+	/*
+	 * Determine if all the devices of the group has an MSI-parent that
+	 * supports irq remapping
+	 */
+	irq_remapping = !iommu_group_for_each_dev(iommu_group, &bus,
+				       vfio_msi_parent_irq_remapping_capable);
+
 	/* Determine bus_type in order to allocate a domain */
 	ret = iommu_group_for_each_dev(iommu_group, &bus, vfio_bus_type);
 	if (ret)
@@ -899,7 +934,7 @@  static int vfio_iommu_type1_attach_group(void *iommu_data,
 	list_add(&group->next, &domain->group_list);
 
 	if (!allow_unsafe_interrupts &&
-	    !iommu_capable(bus, IOMMU_CAP_INTR_REMAP)) {
+	    (!iommu_capable(bus, IOMMU_CAP_INTR_REMAP) && !irq_remapping)) {
 		pr_warn("%s: No interrupt remapping support.  Use the module param \"allow_unsafe_interrupts\" to enable VFIO IOMMU support on this platform\n",
 		       __func__);
 		ret = -EPERM;