diff mbox series

[v3] wifi: bcma/brcm80211: Use the proper include

Message ID 20221028092332.238728-1-linus.walleij@linaro.org
State New
Headers show
Series [v3] wifi: bcma/brcm80211: Use the proper include | expand

Commit Message

Linus Walleij Oct. 28, 2022, 9:23 a.m. UTC 
The <linux/bcma/bcma_driver_chipcommon.h> is including the legacy
header <linux/gpio.h> to obtain struct gpio_chip. Instead, include
<linux/gpio/driver.h> where this struct is defined.

It turns out that the brcm80211 brcmsmac depends on this to
bring in the symbol gpio_is_valid().

The driver looks up the BCMA parent GPIO driver and checks that
this succeeds, but then it goes on to use the deprecated GPIO
call gpio_is_valid() to check the consistency of the .base
member of the BCMA GPIO struct. The whole check can be dropped
because the bcma_gpio is initialized in the declarations:

  struct gpio_chip *bcma_gpio = &cc_drv->gpio;

And this can never be NULL.

Cc: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Drop the whole bcma_gpio check because it cannot be NULL.
  Update commit message.
ChangeLog v1->v2:
- Combine two co-dependent patches
- Collect Arend's ACK
---
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.c | 3 ---
 include/linux/bcma/bcma_driver_chipcommon.h            | 2 +-
 2 files changed, 1 insertion(+), 4 deletions(-)

Comments

Kalle Valo Nov. 4, 2022, 10:59 a.m. UTC | #1 
Linus Walleij <linus.walleij@linaro.org> wrote:

> The <linux/bcma/bcma_driver_chipcommon.h> is including the legacy
> header <linux/gpio.h> to obtain struct gpio_chip. Instead, include
> <linux/gpio/driver.h> where this struct is defined.
> 
> It turns out that the brcm80211 brcmsmac depends on this to
> bring in the symbol gpio_is_valid().
> 
> The driver looks up the BCMA parent GPIO driver and checks that
> this succeeds, but then it goes on to use the deprecated GPIO
> call gpio_is_valid() to check the consistency of the .base
> member of the BCMA GPIO struct. The whole check can be dropped
> because the bcma_gpio is initialized in the declarations:
> 
>   struct gpio_chip *bcma_gpio = &cc_drv->gpio;
> 
> And this can never be NULL.
> 
> Cc: Jonas Gorski <jonas.gorski@gmail.com>
> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Patch applied to wireless-next.git, thanks.

2b6c0e152868 bcma: Use the proper gpio include
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.c
index c1b9ac692d26..9540a05247c2 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.c
@@ -63,9 +63,6 @@  int brcms_led_register(struct brcms_info *wl)
 	int hwnum = -1;
 	enum gpio_lookup_flags lflags = GPIO_ACTIVE_HIGH;
 
-	if (!bcma_gpio || !gpio_is_valid(bcma_gpio->base))
-		return -ENODEV;
-
 	/* find radio enabled LED */
 	for (i = 0; i < BRCMS_LED_NO; i++) {
 		u8 led = *leds[i];
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index 2d94c30ed439..0cb6638b55e5 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -4,7 +4,7 @@ 
 
 #include <linux/platform_device.h>
 #include <linux/platform_data/brcmnand.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 
 /** ChipCommon core registers. **/
 #define BCMA_CC_ID			0x0000