diff mbox series

[v2,02/15] phy: qcom-qmp-ufs: Add support for configuring PHY in HS Series B mode

Message ID 20221031180217.32512-3-manivannan.sadhasivam@linaro.org
State Superseded
Headers show
Series ufs: qcom: Add HS-G4 support | expand

Commit Message

Manivannan Sadhasivam Oct. 31, 2022, 6:02 p.m. UTC
Add separate tables_hs_b instance to allow the PHY driver to configure the
PHY in HS Series B mode. The individual SoC configs need to supply the
serdes register setting in tables_hs_b and the UFS driver can request the
Series B mode by calling phy_set_mode() with mode set to PHY_MODE_UFS_HS_B.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

Comments

Vinod Koul Nov. 11, 2022, 7:01 a.m. UTC | #1
On 31-10-22, 23:32, Manivannan Sadhasivam wrote:
> Add separate tables_hs_b instance to allow the PHY driver to configure the
> PHY in HS Series B mode. The individual SoC configs need to supply the
> serdes register setting in tables_hs_b and the UFS driver can request the
> Series B mode by calling phy_set_mode() with mode set to PHY_MODE_UFS_HS_B.
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> index cdfda4e6d575..4c6a2b5afc9a 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> @@ -20,6 +20,8 @@
>  #include <linux/reset.h>
>  #include <linux/slab.h>
>  
> +#include <ufs/unipro.h>
> +
>  #include <dt-bindings/phy/phy.h>
>  
>  #include "phy-qcom-qmp.h"
> @@ -549,6 +551,8 @@ struct qmp_phy_cfg {
>  
>  	/* Main init sequence for PHY blocks - serdes, tx, rx, pcs */
>  	const struct qmp_phy_cfg_tables tables;
> +	/* Additional sequence for HS Series B */
> +	const struct qmp_phy_cfg_tables tables_hs_b;

what am i missing, where was tables_hs_b added?

>  
>  	/* clock ids to be requested */
>  	const char * const *clk_list;
> @@ -582,6 +586,7 @@ struct qmp_phy_cfg {
>   * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
>   * @pcs_misc: iomapped memory space for lane's pcs_misc
>   * @qmp: QMP phy to which this lane belongs
> + * @mode: PHY mode configured by the UFS driver
>   */
>  struct qmp_phy {
>  	struct phy *phy;
> @@ -594,6 +599,7 @@ struct qmp_phy {
>  	void __iomem *rx2;
>  	void __iomem *pcs_misc;
>  	struct qcom_qmp *qmp;
> +	u32 mode;
>  };
>  
>  /**
> @@ -983,6 +989,8 @@ static int qmp_ufs_power_on(struct phy *phy)
>  	int ret;
>  
>  	qmp_ufs_serdes_init(qphy, &cfg->tables);
> +	if (qphy->mode == PHY_MODE_UFS_HS_B)
> +		qmp_ufs_serdes_init(qphy, &cfg->tables_hs_b);
>  
>  	qmp_ufs_lanes_init(qphy, &cfg->tables);
>  
> @@ -1070,6 +1078,15 @@ static int qmp_ufs_disable(struct phy *phy)
>  	return qmp_ufs_exit(phy);
>  }
>  
> +static int qmp_ufs_set_mode(struct phy *phy, enum phy_mode mode, int submode)
> +{
> +	struct qmp_phy *qphy = phy_get_drvdata(phy);
> +
> +	qphy->mode = mode;
> +
> +	return 0;
> +}
> +
>  static int qmp_ufs_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
>  {
>  	struct qcom_qmp *qmp = dev_get_drvdata(dev);
> @@ -1105,6 +1122,7 @@ static int qmp_ufs_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
>  static const struct phy_ops qcom_qmp_ufs_ops = {
>  	.power_on	= qmp_ufs_enable,
>  	.power_off	= qmp_ufs_disable,
> +	.set_mode	= qmp_ufs_set_mode,
>  	.owner		= THIS_MODULE,
>  };
>  
> -- 
> 2.25.1
Manivannan Sadhasivam Nov. 22, 2022, 4:21 p.m. UTC | #2
On Fri, Nov 11, 2022 at 12:31:15PM +0530, Vinod Koul wrote:
> On 31-10-22, 23:32, Manivannan Sadhasivam wrote:
> > Add separate tables_hs_b instance to allow the PHY driver to configure the
> > PHY in HS Series B mode. The individual SoC configs need to supply the
> > serdes register setting in tables_hs_b and the UFS driver can request the
> > Series B mode by calling phy_set_mode() with mode set to PHY_MODE_UFS_HS_B.
> > 
> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 18 ++++++++++++++++++
> >  1 file changed, 18 insertions(+)
> > 
> > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> > index cdfda4e6d575..4c6a2b5afc9a 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> > @@ -20,6 +20,8 @@
> >  #include <linux/reset.h>
> >  #include <linux/slab.h>
> >  
> > +#include <ufs/unipro.h>
> > +
> >  #include <dt-bindings/phy/phy.h>
> >  
> >  #include "phy-qcom-qmp.h"
> > @@ -549,6 +551,8 @@ struct qmp_phy_cfg {
> >  
> >  	/* Main init sequence for PHY blocks - serdes, tx, rx, pcs */
> >  	const struct qmp_phy_cfg_tables tables;
> > +	/* Additional sequence for HS Series B */
> > +	const struct qmp_phy_cfg_tables tables_hs_b;
> 
> what am i missing, where was tables_hs_b added?
> 

This patch adds the infrastructure for HS_B mode. The actual table is added in
patch 5/15.

Thanks,
Mani

> >  
> >  	/* clock ids to be requested */
> >  	const char * const *clk_list;
> > @@ -582,6 +586,7 @@ struct qmp_phy_cfg {
> >   * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
> >   * @pcs_misc: iomapped memory space for lane's pcs_misc
> >   * @qmp: QMP phy to which this lane belongs
> > + * @mode: PHY mode configured by the UFS driver
> >   */
> >  struct qmp_phy {
> >  	struct phy *phy;
> > @@ -594,6 +599,7 @@ struct qmp_phy {
> >  	void __iomem *rx2;
> >  	void __iomem *pcs_misc;
> >  	struct qcom_qmp *qmp;
> > +	u32 mode;
> >  };
> >  
> >  /**
> > @@ -983,6 +989,8 @@ static int qmp_ufs_power_on(struct phy *phy)
> >  	int ret;
> >  
> >  	qmp_ufs_serdes_init(qphy, &cfg->tables);
> > +	if (qphy->mode == PHY_MODE_UFS_HS_B)
> > +		qmp_ufs_serdes_init(qphy, &cfg->tables_hs_b);
> >  
> >  	qmp_ufs_lanes_init(qphy, &cfg->tables);
> >  
> > @@ -1070,6 +1078,15 @@ static int qmp_ufs_disable(struct phy *phy)
> >  	return qmp_ufs_exit(phy);
> >  }
> >  
> > +static int qmp_ufs_set_mode(struct phy *phy, enum phy_mode mode, int submode)
> > +{
> > +	struct qmp_phy *qphy = phy_get_drvdata(phy);
> > +
> > +	qphy->mode = mode;
> > +
> > +	return 0;
> > +}
> > +
> >  static int qmp_ufs_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> >  {
> >  	struct qcom_qmp *qmp = dev_get_drvdata(dev);
> > @@ -1105,6 +1122,7 @@ static int qmp_ufs_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> >  static const struct phy_ops qcom_qmp_ufs_ops = {
> >  	.power_on	= qmp_ufs_enable,
> >  	.power_off	= qmp_ufs_disable,
> > +	.set_mode	= qmp_ufs_set_mode,
> >  	.owner		= THIS_MODULE,
> >  };
> >  
> > -- 
> > 2.25.1
> 
> -- 
> ~Vinod
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index cdfda4e6d575..4c6a2b5afc9a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -20,6 +20,8 @@ 
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include <ufs/unipro.h>
+
 #include <dt-bindings/phy/phy.h>
 
 #include "phy-qcom-qmp.h"
@@ -549,6 +551,8 @@  struct qmp_phy_cfg {
 
 	/* Main init sequence for PHY blocks - serdes, tx, rx, pcs */
 	const struct qmp_phy_cfg_tables tables;
+	/* Additional sequence for HS Series B */
+	const struct qmp_phy_cfg_tables tables_hs_b;
 
 	/* clock ids to be requested */
 	const char * const *clk_list;
@@ -582,6 +586,7 @@  struct qmp_phy_cfg {
  * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
  * @pcs_misc: iomapped memory space for lane's pcs_misc
  * @qmp: QMP phy to which this lane belongs
+ * @mode: PHY mode configured by the UFS driver
  */
 struct qmp_phy {
 	struct phy *phy;
@@ -594,6 +599,7 @@  struct qmp_phy {
 	void __iomem *rx2;
 	void __iomem *pcs_misc;
 	struct qcom_qmp *qmp;
+	u32 mode;
 };
 
 /**
@@ -983,6 +989,8 @@  static int qmp_ufs_power_on(struct phy *phy)
 	int ret;
 
 	qmp_ufs_serdes_init(qphy, &cfg->tables);
+	if (qphy->mode == PHY_MODE_UFS_HS_B)
+		qmp_ufs_serdes_init(qphy, &cfg->tables_hs_b);
 
 	qmp_ufs_lanes_init(qphy, &cfg->tables);
 
@@ -1070,6 +1078,15 @@  static int qmp_ufs_disable(struct phy *phy)
 	return qmp_ufs_exit(phy);
 }
 
+static int qmp_ufs_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+	struct qmp_phy *qphy = phy_get_drvdata(phy);
+
+	qphy->mode = mode;
+
+	return 0;
+}
+
 static int qmp_ufs_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
 {
 	struct qcom_qmp *qmp = dev_get_drvdata(dev);
@@ -1105,6 +1122,7 @@  static int qmp_ufs_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
 static const struct phy_ops qcom_qmp_ufs_ops = {
 	.power_on	= qmp_ufs_enable,
 	.power_off	= qmp_ufs_disable,
+	.set_mode	= qmp_ufs_set_mode,
 	.owner		= THIS_MODULE,
 };