diff mbox series

[v4,1/2] dt-bindings: mfd: Add bindings for MAX5970 and MAX5978

Message ID 20221101165344.3455723-2-Naresh.Solanki@9elements.com
State New
Headers show
Series [v4,1/2] dt-bindings: mfd: Add bindings for MAX5970 and MAX5978 | expand

Commit Message

Naresh Solanki Nov. 1, 2022, 4:53 p.m. UTC
From: Marcello Sylvester Bauer <sylv@sylv.io>

The MAX597x is a hot swap controller with configurable fault protection.
It also has 10bit ADC for current & voltage measurements.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
---
 .../devicetree/bindings/mfd/max5970.yaml      | 164 ++++++++++++++++++
 1 file changed, 164 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/max5970.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/max5970.yaml b/Documentation/devicetree/bindings/mfd/max5970.yaml
new file mode 100644
index 000000000000..a0cc6a7543b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max5970.yaml
@@ -0,0 +1,164 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/max5970.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator driver for MAX5970 smart switch from Maxim Integrated.
+
+maintainers:
+  - Patrick Rudolph <patrick.rudolph@9elements.com>
+
+description: |
+  The smart switch provides no output regulation, but independent fault protection
+  and voltage and current sensing.
+  Programming is done through I2C bus.
+
+  Datasheets:
+    https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
+    https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max5970
+      - maxim,max5978
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  leds:
+    type: object
+    description:
+      Properties for single channel.
+
+    patternProperties:
+      "^led@[0-3]$":
+        $ref: /schemas/leds/common.yaml#
+        type: object
+
+    additionalProperties: true
+
+  vss1-supply:
+    description: Supply of the first channel.
+
+  "#io-channel-cells":
+    const: 1
+
+  regulators:
+    type: object
+    description:
+      Properties for single channel.
+
+    patternProperties:
+      "^(sw[0-1])$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+
+      shunt-resistor-micro-ohms:
+        description: |
+          The value of curent sense resistor in microohms.
+          Must be specified for each channel.
+
+    additionalProperties: true
+
+required:
+  - compatible
+  - reg
+  - regulators
+  - vss1-supply
+
+allOf:
+  - $ref: /schemas/regulator/regulator.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - maxim,max5970
+    then:
+      properties:
+        vss2-supply:
+          description: Supply of the second channel.
+
+        io-channels:
+          items:
+            - description: voltage first channel
+            - description: current first channel
+            - description: voltage second channel
+            - description: current second channel
+          description: |
+            Voltage and current for first and second channel.
+      required:
+        - vss2-supply
+
+    else:
+      properties:
+        io-channels:
+          items:
+            - description: voltage first channel
+            - description: current first channel
+          description: |
+            Voltage and current for first channel.
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            leds {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                led@0 {
+                        reg = <0>;
+                        label = "led0";
+                        default-state = "on";
+                };
+                led@1 {
+                        reg = <1>;
+                        label = "led1";
+                        default-state = "on";
+                };
+            };
+            regulator@3a {
+                    reg = <0x3a>;
+                    vss1-supply = <&p3v3>;
+                    compatible = "maxim,max5978";
+
+                    regulators {
+                            sw0_ref_0: SW0 {
+                                   regulator-compatible = "SW0";
+                                   shunt-resistor-micro-ohms = <12000>;
+                            };
+                    };
+            };
+    };
+
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            regulator@3a {
+                    reg = <0x3a>;
+                    vss1-supply = <&p3v3>;
+                    vss2-supply = <&p5v>;
+                    compatible = "maxim,max5970";
+
+                    regulators {
+                            sw0_ref_1: SW0 {
+                                   regulator-compatible = "SW0";
+                                   shunt-resistor-micro-ohms = <12000>;
+                            };
+                            sw1_ref_1: SW1 {
+                                   regulator-compatible = "SW1";
+                                   shunt-resistor-micro-ohms = <10000>;
+                            };
+                    };
+            };
+    };
+...