diff mbox series

[PATCH-for-7.2,1/2] hw/sd/sdhci: Do not set Buf Wr Ena before writing block (CVE-2022-3872)

Message ID 20221107221236.47841-2-philmd@linaro.org
State Superseded
Headers show
Series hw/sd/sdhci: Do not set Buf Wr Ena before writing block (CVE-2022-3872) | expand

Commit Message

Philippe Mathieu-Daudé Nov. 7, 2022, 10:12 p.m. UTC
When sdhci_write_block_to_card() is called to transfer data from
the FIFO to the SD bus, the data is already present in the buffer
and we have to consume it directly.

See the description of the 'Buffer Write Enable' bit from the
'Present State' register (prnsts::SDHC_SPACE_AVAILABLE) in Table
2.14 from the SDHCI spec v2:

  Buffer Write Enable

  This status is used for non-DMA write transfers.

  The Host Controller can implement multiple buffers to transfer
  data efficiently. This read only flag indicates if space is
  available for write data. If this bit is 1, data can be written
  to the buffer. A change of this bit from 1 to 0 occurs when all
  the block data is written to the buffer. A change of this bit
  from 0 to 1 occurs when top of block data can be written to the
  buffer and generates the Buffer Write Ready interrupt.

In our case, we do not want to overwrite the buffer, so we want
this bit to be 0, then set it to 1 once the data is written onto
the bus.

This is probably a copy/paste error from commit d7dfca0807
("hw/sdhci: introduce standard SD host controller").

Reproducer:
https://lore.kernel.org/qemu-devel/CAA8xKjXrmS0fkr28AKvNNpyAtM0y0B+5FichpsrhD+mUgnuyKg@mail.gmail.com/

Fixes: CVE-2022-3872
Reported-by: RivenDell <XRivenDell@outlook.com>
Reported-by: Siqi Chen <coc.cyqh@gmail.com>
Reported-by: ningqiang <ningqiang1@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 hw/sd/sdhci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Mauro Matteo Cascella Nov. 8, 2022, 9:16 a.m. UTC | #1
On Mon, Nov 7, 2022 at 11:12 PM Philippe Mathieu-Daudé
<philmd@linaro.org> wrote:
>
> When sdhci_write_block_to_card() is called to transfer data from
> the FIFO to the SD bus, the data is already present in the buffer
> and we have to consume it directly.
>
> See the description of the 'Buffer Write Enable' bit from the
> 'Present State' register (prnsts::SDHC_SPACE_AVAILABLE) in Table
> 2.14 from the SDHCI spec v2:
>
>   Buffer Write Enable
>
>   This status is used for non-DMA write transfers.
>
>   The Host Controller can implement multiple buffers to transfer
>   data efficiently. This read only flag indicates if space is
>   available for write data. If this bit is 1, data can be written
>   to the buffer. A change of this bit from 1 to 0 occurs when all
>   the block data is written to the buffer. A change of this bit
>   from 0 to 1 occurs when top of block data can be written to the
>   buffer and generates the Buffer Write Ready interrupt.
>
> In our case, we do not want to overwrite the buffer, so we want
> this bit to be 0, then set it to 1 once the data is written onto
> the bus.
>
> This is probably a copy/paste error from commit d7dfca0807
> ("hw/sdhci: introduce standard SD host controller").
>
> Reproducer:
> https://lore.kernel.org/qemu-devel/CAA8xKjXrmS0fkr28AKvNNpyAtM0y0B+5FichpsrhD+mUgnuyKg@mail.gmail.com/
>
> Fixes: CVE-2022-3872
> Reported-by: RivenDell <XRivenDell@outlook.com>
> Reported-by: Siqi Chen <coc.cyqh@gmail.com>
> Reported-by: ningqiang <ningqiang1@huawei.com>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
> ---
>  hw/sd/sdhci.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
> index 306070c872..f230e7475f 100644
> --- a/hw/sd/sdhci.c
> +++ b/hw/sd/sdhci.c
> @@ -954,7 +954,7 @@ static void sdhci_data_transfer(void *opaque)
>              sdhci_read_block_from_card(s);
>          } else {
>              s->prnsts |= SDHC_DOING_WRITE | SDHC_DAT_LINE_ACTIVE |
> -                    SDHC_SPACE_AVAILABLE | SDHC_DATA_INHIBIT;
> +                                           SDHC_DATA_INHIBIT;
>              sdhci_write_block_to_card(s);
>          }
>      }
> --
> 2.38.1
>

Tested-by: Mauro Matteo Cascella <mcascell@redhat.com>

Thank you,

--
Mauro Matteo Cascella
Red Hat Product Security
PGP-Key ID: BB3410B0
Alexander Bulekov Nov. 8, 2022, 5:25 p.m. UTC | #2
On 221107 2312, Philippe Mathieu-Daudé wrote:
> When sdhci_write_block_to_card() is called to transfer data from
> the FIFO to the SD bus, the data is already present in the buffer
> and we have to consume it directly.
> 
> See the description of the 'Buffer Write Enable' bit from the
> 'Present State' register (prnsts::SDHC_SPACE_AVAILABLE) in Table
> 2.14 from the SDHCI spec v2:
> 
>   Buffer Write Enable
> 
>   This status is used for non-DMA write transfers.
> 
>   The Host Controller can implement multiple buffers to transfer
>   data efficiently. This read only flag indicates if space is
>   available for write data. If this bit is 1, data can be written
>   to the buffer. A change of this bit from 1 to 0 occurs when all
>   the block data is written to the buffer. A change of this bit
>   from 0 to 1 occurs when top of block data can be written to the
>   buffer and generates the Buffer Write Ready interrupt.
> 
> In our case, we do not want to overwrite the buffer, so we want
> this bit to be 0, then set it to 1 once the data is written onto
> the bus.
> 
> This is probably a copy/paste error from commit d7dfca0807
> ("hw/sdhci: introduce standard SD host controller").
> 
> Reproducer:
> https://lore.kernel.org/qemu-devel/CAA8xKjXrmS0fkr28AKvNNpyAtM0y0B+5FichpsrhD+mUgnuyKg@mail.gmail.com/
> 
> Fixes: CVE-2022-3872
> Reported-by: RivenDell <XRivenDell@outlook.com>
> Reported-by: Siqi Chen <coc.cyqh@gmail.com>
> Reported-by: ningqiang <ningqiang1@huawei.com>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

Seems like OSS-Fuzz also found this, not sure why it never made it into
a gitlab issue:
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=45986#c4

Slightly shorter reproducer:

cat << EOF | ./qemu-system-i386 -display none -machine accel=qtest, -m \
512M -nodefaults -device sdhci-pci -device sd-card,drive=mydrive -drive \
if=none,index=0,file=null-co://,format=raw,id=mydrive -nographic -qtest \
stdio
outl 0xcf8 0x80001010
outl 0xcfc 0xe0000000
outl 0xcf8 0x80001001
outl 0xcfc 0x06000000
write 0xe0000058 0x1 0x6e
write 0xe0000059 0x1 0x5a
write 0xe0000028 0x1 0x10
write 0xe000002c 0x1 0x05
write 0x5a6e 0x1 0x21
write 0x5a75 0x1 0x20
write 0xe0000005 0x1 0x02
write 0xe000000c 0x1 0x01
write 0xe000000e 0x1 0x20
write 0xe000000f 0x1 0x00
write 0xe000000c 0x1 0x00
write 0xe0000020 0x1 0x00
EOF
Alexander Bulekov Nov. 8, 2022, 7:12 p.m. UTC | #3
On 221108 1225, Alexander Bulekov wrote:
> On 221107 2312, Philippe Mathieu-Daudé wrote:
> > When sdhci_write_block_to_card() is called to transfer data from
> > the FIFO to the SD bus, the data is already present in the buffer
> > and we have to consume it directly.
> > 
> > See the description of the 'Buffer Write Enable' bit from the
> > 'Present State' register (prnsts::SDHC_SPACE_AVAILABLE) in Table
> > 2.14 from the SDHCI spec v2:
> > 
> >   Buffer Write Enable
> > 
> >   This status is used for non-DMA write transfers.
> > 
> >   The Host Controller can implement multiple buffers to transfer
> >   data efficiently. This read only flag indicates if space is
> >   available for write data. If this bit is 1, data can be written
> >   to the buffer. A change of this bit from 1 to 0 occurs when all
> >   the block data is written to the buffer. A change of this bit
> >   from 0 to 1 occurs when top of block data can be written to the
> >   buffer and generates the Buffer Write Ready interrupt.
> > 
> > In our case, we do not want to overwrite the buffer, so we want
> > this bit to be 0, then set it to 1 once the data is written onto
> > the bus.
> > 
> > This is probably a copy/paste error from commit d7dfca0807
> > ("hw/sdhci: introduce standard SD host controller").
> > 
> > Reproducer:
> > https://lore.kernel.org/qemu-devel/CAA8xKjXrmS0fkr28AKvNNpyAtM0y0B+5FichpsrhD+mUgnuyKg@mail.gmail.com/
> > 
> > Fixes: CVE-2022-3872
> > Reported-by: RivenDell <XRivenDell@outlook.com>
> > Reported-by: Siqi Chen <coc.cyqh@gmail.com>
> > Reported-by: ningqiang <ningqiang1@huawei.com>
> > Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
> 
> Seems like OSS-Fuzz also found this, not sure why it never made it into
> a gitlab issue:
> https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=45986#c4
> 
> Slightly shorter reproducer:
> 
> cat << EOF | ./qemu-system-i386 -display none -machine accel=qtest, -m \
> 512M -nodefaults -device sdhci-pci -device sd-card,drive=mydrive -drive \
> if=none,index=0,file=null-co://,format=raw,id=mydrive -nographic -qtest \
> stdio
> outl 0xcf8 0x80001010
> outl 0xcfc 0xe0000000
> outl 0xcf8 0x80001001
> outl 0xcfc 0x06000000
> write 0xe0000058 0x1 0x6e
> write 0xe0000059 0x1 0x5a
> write 0xe0000028 0x1 0x10
> write 0xe000002c 0x1 0x05
> write 0x5a6e 0x1 0x21
> write 0x5a75 0x1 0x20
> write 0xe0000005 0x1 0x02
> write 0xe000000c 0x1 0x01
> write 0xe000000e 0x1 0x20
> write 0xe000000f 0x1 0x00
> write 0xe000000c 0x1 0x00
> write 0xe0000020 0x1 0x00
> EOF

Hi Philippe,
I ran the fuzzer with this series applied and it found:

cat << EOF | ./qemu-system-i386 -display none -machine accel=qtest, -m \
512M -nodefaults -device sdhci-pci -device sd-card,drive=mydrive -drive \
if=none,index=0,file=null-co://,format=raw,id=mydrive -nographic -qtest \
stdio
outl 0xcf8 0x80001010
outl 0xcfc 0xe0000000
outl 0xcf8 0x80001004
outw 0xcfc 0x06
write 0xe0000028 0x1 0x08
write 0xe000002c 0x1 0x05
write 0xe0000005 0x1 0x02
write 0x0 0x1 0x21
write 0x3 0x1 0x20
write 0xe000000c 0x1 0x01
write 0xe000000e 0x1 0x20
write 0xe000000f 0x1 0x00
write 0xe000000c 0x1 0x20
write 0xe0000020 0x1 0x00
EOF

The crash seems very similar, but it looks like instead of
SDHC_TRNS_READ this reproducer sets SDHC_TRNS_MULTI
-Alex
diff mbox series

Patch

diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index 306070c872..f230e7475f 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -954,7 +954,7 @@  static void sdhci_data_transfer(void *opaque)
             sdhci_read_block_from_card(s);
         } else {
             s->prnsts |= SDHC_DOING_WRITE | SDHC_DAT_LINE_ACTIVE |
-                    SDHC_SPACE_AVAILABLE | SDHC_DATA_INHIBIT;
+                                           SDHC_DATA_INHIBIT;
             sdhci_write_block_to_card(s);
         }
     }