new file mode 100644
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/fujitsu,sdhci-fujitsu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fujitsu SDHCI controller (F_SDH30)
+
+maintainers:
+ - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+ - $ref: mmc-controller.yaml#
+
+properties:
+ compatible:
+ const: fujitsu,mb86s70-sdhci-3.0
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: iface
+ - const: core
+
+ resets:
+ maxItems: 1
+
+ fujitsu,cmd-dat-delay-select:
+ type: boolean
+ description: |
+ Indicating that this host requires the CMD_DAT_DELAY control to be enabled
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ sdhci1: mmc@36600000 {
+ compatible = "fujitsu,mb86s70-sdhci-3.0";
+ reg = <0x36600000 0x1000>;
+ bus-width = <4>;
+ vqmmc-supply = <&vccq_sdhci1>;
+ clocks = <&clock 2 2 0>, <&clock 2 3 0>;
+ clock-names = "iface", "core";
+ };
deleted file mode 100644
@@ -1,32 +0,0 @@
-* Fujitsu SDHCI controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci_f_sdh30 driver.
-
-Required properties:
-- compatible: "fujitsu,mb86s70-sdhci-3.0"
-- clocks: Must contain an entry for each entry in clock-names. It is a
- list of phandles and clock-specifier pairs.
- See ../clocks/clock-bindings.txt for details.
-- clock-names: Should contain the following two entries:
- "iface" - clock used for sdhci interface
- "core" - core clock for sdhci controller
-
-Optional properties:
-- vqmmc-supply: phandle to the regulator device tree node, mentioned
- as the VCCQ/VDD_IO supply in the eMMC/SD specs.
-- fujitsu,cmd-dat-delay-select: boolean property indicating that this host
- requires the CMD_DAT_DELAY control to be enabled.
-
-Example:
-
- sdhci1: mmc@36600000 {
- compatible = "fujitsu,mb86s70-sdhci-3.0";
- reg = <0 0x36600000 0x1000>;
- interrupts = <0 172 0x4>,
- <0 173 0x4>;
- bus-width = <4>;
- vqmmc-supply = <&vccq_sdhci1>;
- clocks = <&clock 2 2 0>, <&clock 2 3 0>;
- clock-names = "iface", "core";
- };
Convert the Fujitsu SDHCI controller IP binding to DT schema format, and add resets property as optional to support reset control. Cc: devicetree@vger.kernel.org Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- .../bindings/mmc/fujitsu,sdhci-fujitsu.yaml | 55 +++++++++++++++++++ .../devicetree/bindings/mmc/sdhci-fujitsu.txt | 32 ----------- 2 files changed, 55 insertions(+), 32 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/fujitsu,sdhci-fujitsu.yaml delete mode 100644 Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt