diff mbox series

[v2,03/10] interconnect: qcom: osm-l3: Add per-core EPSS L3 support

Message ID 20221111032515.3460-4-quic_bjorande@quicinc.com
State Accepted
Commit 9235253ec73dfd71cc83d154693476930fc8dd77
Headers show
Series interconnect: osm-l3: SC8280XP L3 and DDR scaling | expand

Commit Message

Bjorn Andersson Nov. 11, 2022, 3:25 a.m. UTC
The EPSS instance in e.g. SM8350 and SC8280XP has per-core L3 voting
enabled. In this configuration, the "shared" vote is done using the
REG_L3_VOTE register instead of PERF_STATE.

Rename epss_l3 to clarify that it's affecting the PERF_STATE register
and add a new L3_VOTE description. Given platform lineage it's assumed
that the L3_VOTE-based case will be the predominant one, so use this for
a new generic qcom,epss-l3 compatible.

While adding the EPSS generic, also add qcom,osm-l3.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
---

Changes since v1:
- None

 drivers/interconnect/qcom/osm-l3.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c
index 7d6844253241..469be732a00b 100644
--- a/drivers/interconnect/qcom/osm-l3.c
+++ b/drivers/interconnect/qcom/osm-l3.c
@@ -34,6 +34,7 @@ 
 
 /* EPSS Register offsets */
 #define EPSS_LUT_ROW_SIZE		4
+#define EPSS_REG_L3_VOTE		0x90
 #define EPSS_REG_FREQ_LUT		0x100
 #define EPSS_REG_PERF_STATE		0x320
 
@@ -112,7 +113,7 @@  static const struct qcom_osm_l3_desc osm_l3 = {
 	.reg_perf_state = OSM_REG_PERF_STATE,
 };
 
-static const struct qcom_osm_l3_desc epss_l3 = {
+static const struct qcom_osm_l3_desc epss_l3_perf_state = {
 	.nodes = epss_l3_nodes,
 	.num_nodes = ARRAY_SIZE(epss_l3_nodes),
 	.lut_row_size = EPSS_LUT_ROW_SIZE,
@@ -120,6 +121,14 @@  static const struct qcom_osm_l3_desc epss_l3 = {
 	.reg_perf_state = EPSS_REG_PERF_STATE,
 };
 
+static const struct qcom_osm_l3_desc epss_l3_l3_vote = {
+	.nodes = epss_l3_nodes,
+	.num_nodes = ARRAY_SIZE(epss_l3_nodes),
+	.lut_row_size = EPSS_LUT_ROW_SIZE,
+	.reg_freq_lut = EPSS_REG_FREQ_LUT,
+	.reg_perf_state = EPSS_REG_L3_VOTE,
+};
+
 static int qcom_osm_l3_set(struct icc_node *src, struct icc_node *dst)
 {
 	struct qcom_osm_l3_icc_provider *qp;
@@ -285,12 +294,14 @@  static int qcom_osm_l3_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id osm_l3_of_match[] = {
+	{ .compatible = "qcom,epss-l3", .data = &epss_l3_l3_vote },
+	{ .compatible = "qcom,osm-l3", .data = &osm_l3 },
 	{ .compatible = "qcom,sc7180-osm-l3", .data = &osm_l3 },
-	{ .compatible = "qcom,sc7280-epss-l3", .data = &epss_l3 },
+	{ .compatible = "qcom,sc7280-epss-l3", .data = &epss_l3_perf_state },
 	{ .compatible = "qcom,sdm845-osm-l3", .data = &osm_l3 },
 	{ .compatible = "qcom,sm8150-osm-l3", .data = &osm_l3 },
 	{ .compatible = "qcom,sc8180x-osm-l3", .data = &osm_l3 },
-	{ .compatible = "qcom,sm8250-epss-l3", .data = &epss_l3 },
+	{ .compatible = "qcom,sm8250-epss-l3", .data = &epss_l3_perf_state },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, osm_l3_of_match);