diff mbox series

[v2,5/9] arm64: dts: qcom: sm6375: Add QUPs and corresponding SPI/I2C hosts

Message ID 20221114104222.36329-6-konrad.dybcio@linaro.org
State Superseded
Headers show
Series SM6375/PDX225 GPI DMA, QUPs & PMIC peripherals | expand

Commit Message

Konrad Dybcio Nov. 14, 2022, 10:42 a.m. UTC
Add necessary nodes to support various QUP configurations. Note that:

- QUP3/4/5 and 11 are straight up missing
- There may be more QUPs physically on the SoC that work perfectly
fine, but Qualcomm decided not to expose them on the downstream kernel
- Many are missing pinctrls, as there are both missing pin funcs in
the TLMM driver and missing configuration settings (though they are
possible to guesstimate quite easily)

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
No changes since v1.

 arch/arm64/boot/dts/qcom/sm6375.dtsi | 306 +++++++++++++++++++++++++++
 1 file changed, 306 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 952156891476..6adffd927a8e 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -5,6 +5,7 @@ 
 
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/clock/qcom,sm6375-gcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -317,6 +318,25 @@  CLUSTER_PD: cpu-cluster0 {
 		};
 	};
 
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
 	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -630,6 +650,125 @@  gpi_dma0: dma-controller@4a00000 {
 			status = "disabled";
 		};
 
+		qupv3_id_0: geniqup@4ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x04ac0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@4a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@4a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@4a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@4a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@4a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@4a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			/*
+			 * As per GCC, QUP3/4/5/11 also exist, but are not even defined downstream.
+			 * There is a comment in the included DTSI of another SoC saying that they
+			 * are not "bolled out" (probably meaning not routed to solder balls)
+			 * TLMM driver however, suggests there are as many as 15 QUPs in total!
+			 * Most of which don't even have pin configurations for.. Sad stuff!
+			 */
+		};
+
 		gpi_dma1: dma-controller@4c00000 {
 			compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x04c00000 0 0x60000>;
@@ -650,6 +789,173 @@  gpi_dma1: dma-controller@4c00000 {
 			status = "disabled";
 		};
 
+		qupv3_id_1: geniqup@4cc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x04cc0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0xc3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c6: i2c@4c80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@4c80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@4c84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@4c84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@4c88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@4c88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@4c8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@4c8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@4c90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@4c90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
 		usb_1: usb@4ef8800 {
 			compatible = "qcom,sm6375-dwc3", "qcom,dwc3";
 			reg = <0 0x04ef8800 0 0x400>;