diff mbox series

[5/6] i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant

Message ID 20221114-narmstrong-sm8550-upstream-i2c-master-hub-v1-5-64449106a148@linaro.org
State Superseded
Headers show
Series soc: qcom: add support for the I2C Master Hub | expand

Commit Message

Neil Armstrong Nov. 16, 2022, 10:21 a.m. UTC
The I2C Master Hub is a stripped down version of the GENI Serial Engine
QUP Wrapper Controller but only supporting I2C serial engines without
DMA support.

Those I2C serial engines variants have some requirements:
- a separate "core" clock
- doesn't support DMA, thus no memory interconnect path
- fixed FIFO size not discoverable in the HW_PARAM_0 register

This adds a desc struct specifying all those requirements which
will be used in a next change when adding the I2C Master Hub
serial engine compatible.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/i2c/busses/i2c-qcom-geni.c | 50 +++++++++++++++++++++++++++++++++++---
 1 file changed, 47 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 84a77512614d..75dd0718c5a1 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -88,6 +88,7 @@  struct geni_i2c_dev {
 	int cur_wr;
 	int cur_rd;
 	spinlock_t lock;
+	struct clk *core_clk;
 	u32 clk_freq_out;
 	const struct geni_i2c_clk_fld *clk_fld;
 	int suspended;
@@ -100,6 +101,13 @@  struct geni_i2c_dev {
 	bool abort_done;
 };
 
+struct geni_i2c_desc {
+	bool has_core_clk;
+	char *icc_ddr;
+	bool no_dma_support;
+	unsigned int tx_fifo_depth;
+};
+
 struct geni_i2c_err_log {
 	int err;
 	const char *msg;
@@ -764,6 +772,7 @@  static int geni_i2c_probe(struct platform_device *pdev)
 	u32 proto, tx_depth, fifo_disable;
 	int ret;
 	struct device *dev = &pdev->dev;
+	const struct geni_i2c_desc *desc = NULL;
 
 	gi2c = devm_kzalloc(dev, sizeof(*gi2c), GFP_KERNEL);
 	if (!gi2c)
@@ -776,6 +785,14 @@  static int geni_i2c_probe(struct platform_device *pdev)
 	if (IS_ERR(gi2c->se.base))
 		return PTR_ERR(gi2c->se.base);
 
+	desc = device_get_match_data(&pdev->dev);
+
+	if (desc && desc->has_core_clk) {
+		gi2c->core_clk = devm_clk_get(dev, "core");
+		if (IS_ERR(gi2c->core_clk))
+			return PTR_ERR(gi2c->core_clk);
+	}
+
 	gi2c->se.clk = devm_clk_get(dev, "se");
 	if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(dev))
 		return PTR_ERR(gi2c->se.clk);
@@ -819,7 +836,7 @@  static int geni_i2c_probe(struct platform_device *pdev)
 	gi2c->adap.dev.of_node = dev->of_node;
 	strscpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));
 
-	ret = geni_icc_get(&gi2c->se, "qup-memory");
+	ret = geni_icc_get(&gi2c->se, desc ? desc->icc_ddr : "qup-memory");
 	if (ret)
 		return ret;
 	/*
@@ -829,12 +846,17 @@  static int geni_i2c_probe(struct platform_device *pdev)
 	 */
 	gi2c->se.icc_paths[GENI_TO_CORE].avg_bw = GENI_DEFAULT_BW;
 	gi2c->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW;
-	gi2c->se.icc_paths[GENI_TO_DDR].avg_bw = Bps_to_icc(gi2c->clk_freq_out);
+	if (!desc || desc->icc_ddr)
+		gi2c->se.icc_paths[GENI_TO_DDR].avg_bw = Bps_to_icc(gi2c->clk_freq_out);
 
 	ret = geni_icc_set_bw(&gi2c->se);
 	if (ret)
 		return ret;
 
+	ret = clk_prepare_enable(gi2c->core_clk);
+	if (ret)
+		return ret;
+
 	ret = geni_se_resources_on(&gi2c->se);
 	if (ret) {
 		dev_err(dev, "Error turning on resources %d\n", ret);
@@ -844,10 +866,15 @@  static int geni_i2c_probe(struct platform_device *pdev)
 	if (proto != GENI_SE_I2C) {
 		dev_err(dev, "Invalid proto %d\n", proto);
 		geni_se_resources_off(&gi2c->se);
+		clk_disable_unprepare(gi2c->core_clk);
 		return -ENXIO;
 	}
 
-	fifo_disable = readl_relaxed(gi2c->se.base + GENI_IF_DISABLE_RO) & FIFO_IF_DISABLE;
+	if (desc && desc->no_dma_support)
+		fifo_disable = false;
+	else
+		fifo_disable = readl_relaxed(gi2c->se.base + GENI_IF_DISABLE_RO) & FIFO_IF_DISABLE;
+
 	if (fifo_disable) {
 		/* FIFO is disabled, so we can only use GPI DMA */
 		gi2c->gpi_mode = true;
@@ -859,6 +886,16 @@  static int geni_i2c_probe(struct platform_device *pdev)
 	} else {
 		gi2c->gpi_mode = false;
 		tx_depth = geni_se_get_tx_fifo_depth(&gi2c->se);
+
+		/* I2C Master Hub Serial Elements doesn't have the HW_PARAM_0 register */
+		if (!tx_depth && desc)
+			tx_depth = desc->tx_fifo_depth;
+
+		if (!tx_depth) {
+			dev_err(dev, "Invalid TX FIFO depth\n");
+			return -EINVAL;
+		}
+
 		gi2c->tx_wm = tx_depth - 1;
 		geni_se_init(&gi2c->se, gi2c->tx_wm, tx_depth);
 		geni_se_config_packing(&gi2c->se, BITS_PER_BYTE,
@@ -867,6 +904,7 @@  static int geni_i2c_probe(struct platform_device *pdev)
 		dev_dbg(dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
 	}
 
+	clk_disable_unprepare(gi2c->core_clk);
 	ret = geni_se_resources_off(&gi2c->se);
 	if (ret) {
 		dev_err(dev, "Error turning off resources %d\n", ret);
@@ -932,6 +970,8 @@  static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
 		gi2c->suspended = 1;
 	}
 
+	clk_disable_unprepare(gi2c->core_clk);
+
 	return geni_icc_disable(&gi2c->se);
 }
 
@@ -944,6 +984,10 @@  static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
 	if (ret)
 		return ret;
 
+	ret = clk_prepare_enable(gi2c->core_clk);
+	if (ret)
+		return ret;
+
 	ret = geni_se_resources_on(&gi2c->se);
 	if (ret)
 		return ret;