| Message ID | 20221130055214.2416888-2-jiajie.ho@starfivetech.com |
|---|---|
| State | New |
| Headers | show |
| Series | crypto: starfive: Add driver for cryptographic engine | expand |
On 30/11/2022 06:52, Jia Jie Ho wrote: > Adding device probe and DMA init for StarFive > hardware crypto engine. > > Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com> > Signed-off-by: Huan Feng <huan.feng@starfivetech.com> > --- > + > +static const struct of_device_id starfive_dt_ids[] = { > + { .compatible = "starfive,jh7110-crypto", .data = NULL}, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, starfive_dt_ids); Keep your table close to its usage, just like in many other drivers. > + > +static int starfive_dma_init(struct starfive_sec_dev *sdev) > +{ > + dma_cap_mask_t mask; > + int err; > + > + sdev->sec_xm_m = NULL; > + sdev->sec_xm_p = NULL; > + > + dma_cap_zero(mask); > + dma_cap_set(DMA_SLAVE, mask); > + > + sdev->sec_xm_m = dma_request_chan(sdev->dev, "sec_m"); > + if (IS_ERR(sdev->sec_xm_m)) { > + dev_err(sdev->dev, "sec_m dma channel request failed.\n"); return dev_err_probe > + return PTR_ERR(sdev->sec_xm_m); > + } > + > + sdev->sec_xm_p = dma_request_chan(sdev->dev, "sec_p"); > + if (IS_ERR(sdev->sec_xm_p)) { > + dev_err(sdev->dev, "sec_p dma channel request failed.\n"); dev_err_probe > + goto err_dma_out; > + } > + > + init_completion(&sdev->sec_comp_m); > + init_completion(&sdev->sec_comp_p); > + > + return 0; > + > +err_dma_out: > + dma_release_channel(sdev->sec_xm_m); I don't think you tested it. Not even built with proper tools liek smatch, sparse, W=1. Where do you set err? > + > + return err; > +} > + > +static void starfive_dma_cleanup(struct starfive_sec_dev *sdev) > +{ > + dma_release_channel(sdev->sec_xm_p); > + dma_release_channel(sdev->sec_xm_m); > +} > + > +static int starfive_cryp_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct starfive_sec_dev *sdev; > + struct resource *res; > + int pages = 0; > + int ret; > + > + sdev = devm_kzalloc(dev, sizeof(*sdev), GFP_KERNEL); > + if (!sdev) > + return -ENOMEM; > + > + sdev->dev = dev; > + > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "secreg"); > + sdev->io_base = devm_ioremap_resource(dev, res); I think there is a wrapper for both calls... > + > + if (IS_ERR(sdev->io_base)) > + return PTR_ERR(sdev->io_base); > + > + sdev->use_side_channel_mitigation = > + device_property_read_bool(dev, "enable-side-channel-mitigation"); > + sdev->use_dma = device_property_read_bool(dev, "enable-dma"); > + sdev->dma_maxburst = 32; > + > + sdev->sec_hclk = devm_clk_get(dev, "sec_hclk"); > + if (IS_ERR(sdev->sec_hclk)) { > + dev_err(dev, "Failed to get sec_hclk.\n"); > + return PTR_ERR(sdev->sec_hclk); return dev_err_probe > + } > + > + sdev->sec_ahb = devm_clk_get(dev, "sec_ahb"); > + if (IS_ERR(sdev->sec_ahb)) { > + dev_err(dev, "Failed to get sec_ahb.\n"); > + return PTR_ERR(sdev->sec_ahb); return dev_err_probe > + } > + > + sdev->rst_hresetn = devm_reset_control_get_shared(sdev->dev, "sec_hre"); > + if (IS_ERR(sdev->rst_hresetn)) { > + dev_err(sdev->dev, "Failed to get sec_hre.\n"); > + return PTR_ERR(sdev->rst_hresetn); return dev_err_probe > + } > + > + clk_prepare_enable(sdev->sec_hclk); > + clk_prepare_enable(sdev->sec_ahb); > + reset_control_deassert(sdev->rst_hresetn); > + > + platform_set_drvdata(pdev, sdev); > + > + spin_lock(&dev_list.lock); > + list_add(&sdev->list, &dev_list.dev_list); > + spin_unlock(&dev_list.lock); > + > + if (sdev->use_dma) { > + ret = starfive_dma_init(sdev); > + if (ret) { > + dev_err(dev, "Failed to initialize DMA channel.\n"); > + goto err_dma_init; > + } > + } > + > + pages = get_order(STARFIVE_MSG_BUFFER_SIZE); > + > + sdev->pages_count = pages >> 1; > + sdev->data_buf_len = STARFIVE_MSG_BUFFER_SIZE >> 1; > + > + /* Initialize crypto engine */ > + sdev->engine = crypto_engine_alloc_init(dev, 1); > + if (!sdev->engine) { > + ret = -ENOMEM; > + goto err_engine; > + } > + > + ret = crypto_engine_start(sdev->engine); > + if (ret) > + goto err_engine_start; > + > + dev_info(dev, "Crypto engine started\n"); Drop silly probe success messages. > + > + return 0; > + > +err_engine_start: > + crypto_engine_exit(sdev->engine); > +err_engine: > + starfive_dma_cleanup(sdev); > +err_dma_init: > + spin_lock(&dev_list.lock); > + list_del(&sdev->list); > + spin_unlock(&dev_list.lock); > + > + return ret; > +} > + > +static int starfive_cryp_remove(struct platform_device *pdev) > +{ > + struct starfive_sec_dev *sdev = platform_get_drvdata(pdev); > + > + if (!sdev) > + return -ENODEV; > + > + crypto_engine_stop(sdev->engine); > + crypto_engine_exit(sdev->engine); > + > + starfive_dma_cleanup(sdev); > + > + spin_lock(&dev_list.lock); > + list_del(&sdev->list); > + spin_unlock(&dev_list.lock); > + > + clk_disable_unprepare(sdev->sec_hclk); > + clk_disable_unprepare(sdev->sec_ahb); > + reset_control_assert(sdev->rst_hresetn); > + > + return 0; > +} > + > +#ifdef CONFIG_PM > +static int starfive_cryp_runtime_suspend(struct device *dev) > +{ > + struct starfive_sec_dev *sdev = dev_get_drvdata(dev); > + > + clk_disable_unprepare(sdev->sec_ahb); > + clk_disable_unprepare(sdev->sec_hclk); > + > + return 0; > +} > + > +static int starfive_cryp_runtime_resume(struct device *dev) > +{ > + struct starfive_sec_dev *sdev = dev_get_drvdata(dev); > + int ret; > + > + ret = clk_prepare_enable(sdev->sec_ahb); > + if (ret) { > + dev_err(sdev->dev, "Failed to prepare_enable sec_ahb clock\n"); > + return ret; > + } > + > + ret = clk_prepare_enable(sdev->sec_hclk); > + if (ret) { > + dev_err(sdev->dev, "Failed to prepare_enable sec_hclk clock\n"); > + return ret; > + } > + > + return 0; > +} > +#endif > + > +static const struct dev_pm_ops starfive_cryp_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, > + pm_runtime_force_resume) > + SET_RUNTIME_PM_OPS(starfive_cryp_runtime_suspend, > + starfive_cryp_runtime_resume, NULL) > +}; > + > +static struct platform_driver starfive_cryp_driver = { > + .probe = starfive_cryp_probe, > + .remove = starfive_cryp_remove, > + .driver = { > + .name = DRIVER_NAME, > + .pm = &starfive_cryp_pm_ops, > + .of_match_table = starfive_dt_ids, > + }, > +}; > + > +module_platform_driver(starfive_cryp_driver); > + > +MODULE_LICENSE("GPL"); > +MODULE_DESCRIPTION("StarFive hardware crypto acceleration"); > diff --git a/drivers/crypto/starfive/starfive-regs.h b/drivers/crypto/starfive/starfive-regs.h > new file mode 100644 > index 000000000000..0d680cb1f502 > --- /dev/null > +++ b/drivers/crypto/starfive/starfive-regs.h > @@ -0,0 +1,26 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +#ifndef __STARFIVE_REGS_H__ > +#define __STARFIVE_REGS_H__ > + > +#define STARFIVE_ALG_CR_OFFSET 0x0 > +#define STARFIVE_ALG_FIFO_OFFSET 0x4 > +#define STARFIVE_IE_MASK_OFFSET 0x8 > +#define STARFIVE_IE_FLAG_OFFSET 0xc > +#define STARFIVE_DMA_IN_LEN_OFFSET 0x10 > +#define STARFIVE_DMA_OUT_LEN_OFFSET 0x14 > + > +union starfive_alg_cr { > + u32 v; > + struct { > + u32 start :1; > + u32 aes_dma_en :1; > + u32 rsvd_0 :1; > + u32 hash_dma_en :1; > + u32 alg_done :1; > + u32 rsvd_1 :3; > + u32 clear :1; > + u32 rsvd_2 :23; > + }; > +}; > + > +#endif > diff --git a/drivers/crypto/starfive/starfive-str.h b/drivers/crypto/starfive/starfive-str.h > new file mode 100644 > index 000000000000..4ba3c56f0573 > --- /dev/null > +++ b/drivers/crypto/starfive/starfive-str.h > @@ -0,0 +1,74 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +#ifndef __STARFIVE_STR_H__ > +#define __STARFIVE_STR_H__ > + > +#include <linux/delay.h> > +#include <linux/dma-mapping.h> > +#include <linux/dmaengine.h> > + > +#include <crypto/engine.h> > + > +#include "starfive-regs.h" > + > +#define STARFIVE_MSG_BUFFER_SIZE SZ_16K > + > +struct starfive_sec_ctx { > + struct crypto_engine_ctx enginectx; > + struct starfive_sec_dev *sdev; > + > + u8 *buffer; > +}; > + > +struct starfive_sec_dev { > + struct list_head list; > + struct device *dev; > + > + struct clk *sec_hclk; > + struct clk *sec_ahb; > + struct reset_control *rst_hresetn; > + > + void __iomem *io_base; > + phys_addr_t io_phys_base; > + > + size_t data_buf_len; > + int pages_count; > + u32 use_side_channel_mitigation; > + u32 use_dma; > + u32 dma_maxburst; > + struct dma_chan *sec_xm_m; > + struct dma_chan *sec_xm_p; > + struct dma_slave_config cfg_in; > + struct dma_slave_config cfg_out; > + struct completion sec_comp_m; > + struct completion sec_comp_p; > + > + struct crypto_engine *engine; > + > + union starfive_alg_cr alg_cr; > +}; > + > +static inline u32 starfive_sec_read(struct starfive_sec_dev *sdev, u32 offset) > +{ > + return __raw_readl(sdev->io_base + offset); I don't think these read/write wrappers help anyhow... Best regards, Krzysztof
> -----Original Message----- > From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Sent: Wednesday, November 30, 2022 9:16 PM > To: JiaJie Ho <jiajie.ho@starfivetech.com>; Herbert Xu > <herbert@gondor.apana.org.au>; David S . Miller <davem@davemloft.net>; > Rob Herring <robh+dt@kernel.org>; Krzysztof Kozlowski > <krzysztof.kozlowski+dt@linaro.org> > Cc: linux-crypto@vger.kernel.org; devicetree@vger.kernel.org; linux- > kernel@vger.kernel.org; linux-riscv@lists.infradead.org > Subject: Re: [PATCH 1/6] crypto: starfive - Add StarFive crypto engine > support > Hi Krzysztof Kozlowski, > On 30/11/2022 06:52, Jia Jie Ho wrote: > > Adding device probe and DMA init for StarFive hardware crypto engine. > > > > Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com> > > Signed-off-by: Huan Feng <huan.feng@starfivetech.com> > > --- > > > > + > > +static const struct of_device_id starfive_dt_ids[] = { > > + { .compatible = "starfive,jh7110-crypto", .data = NULL}, > > + {}, > > +}; > > +MODULE_DEVICE_TABLE(of, starfive_dt_ids); > > Keep your table close to its usage, just like in many other drivers. > Moving this in the next version. > > + > > +static int starfive_dma_init(struct starfive_sec_dev *sdev) { > > + dma_cap_mask_t mask; > > + int err; > > + > > + sdev->sec_xm_m = NULL; > > + sdev->sec_xm_p = NULL; > > + > > + dma_cap_zero(mask); > > + dma_cap_set(DMA_SLAVE, mask); > > + > > + sdev->sec_xm_m = dma_request_chan(sdev->dev, "sec_m"); > > + if (IS_ERR(sdev->sec_xm_m)) { > > + dev_err(sdev->dev, "sec_m dma channel request failed.\n"); > > return dev_err_probe > I'll replace this and the following return error with dev_err_probe . > > + return PTR_ERR(sdev->sec_xm_m); > > + } > > + > > + sdev->sec_xm_p = dma_request_chan(sdev->dev, "sec_p"); > > + if (IS_ERR(sdev->sec_xm_p)) { > > + dev_err(sdev->dev, "sec_p dma channel request failed.\n"); > > dev_err_probe > > > + goto err_dma_out; > > + } > > + > > + init_completion(&sdev->sec_comp_m); > > + init_completion(&sdev->sec_comp_p); > > + > > + return 0; > > + > > +err_dma_out: > > + dma_release_channel(sdev->sec_xm_m); > > I don't think you tested it. Not even built with proper tools liek smatch, > sparse, W=1. Where do you set err? > I'll compile this driver with proper tools before submitting the new patch series. > > + > > + return err; > > +} > > + > > +static void starfive_dma_cleanup(struct starfive_sec_dev *sdev) { > > + dma_release_channel(sdev->sec_xm_p); > > + dma_release_channel(sdev->sec_xm_m); > > +} > > + > > +static int starfive_cryp_probe(struct platform_device *pdev) { > > + struct device *dev = &pdev->dev; > > + struct starfive_sec_dev *sdev; > > + struct resource *res; > > + int pages = 0; > > + int ret; > > + > > + sdev = devm_kzalloc(dev, sizeof(*sdev), GFP_KERNEL); > > + if (!sdev) > > + return -ENOMEM; > > + > > + sdev->dev = dev; > > + > > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, > "secreg"); > > + sdev->io_base = devm_ioremap_resource(dev, res); > > I think there is a wrapper for both calls... > I'll replace this with devm_platform_ioremap_resource_byname() > > + > > + if (IS_ERR(sdev->io_base)) > > + return PTR_ERR(sdev->io_base); > > + > > + sdev->use_side_channel_mitigation = > > + device_property_read_bool(dev, "enable-side-channel- > mitigation"); > > + sdev->use_dma = device_property_read_bool(dev, "enable-dma"); > > + sdev->dma_maxburst = 32; > > + > > + sdev->sec_hclk = devm_clk_get(dev, "sec_hclk"); > > + if (IS_ERR(sdev->sec_hclk)) { > > + dev_err(dev, "Failed to get sec_hclk.\n"); > > + return PTR_ERR(sdev->sec_hclk); > > return dev_err_probe > > > + } > > + > > + sdev->sec_ahb = devm_clk_get(dev, "sec_ahb"); > > + if (IS_ERR(sdev->sec_ahb)) { > > + dev_err(dev, "Failed to get sec_ahb.\n"); > > + return PTR_ERR(sdev->sec_ahb); > > return dev_err_probe > > > + } > > + > > + sdev->rst_hresetn = devm_reset_control_get_shared(sdev->dev, > "sec_hre"); > > + if (IS_ERR(sdev->rst_hresetn)) { > > + dev_err(sdev->dev, "Failed to get sec_hre.\n"); > > + return PTR_ERR(sdev->rst_hresetn); > > return dev_err_probe > > > + } > > + > > + clk_prepare_enable(sdev->sec_hclk); > > + clk_prepare_enable(sdev->sec_ahb); > > + reset_control_deassert(sdev->rst_hresetn); > > + > > + platform_set_drvdata(pdev, sdev); > > + > > + spin_lock(&dev_list.lock); > > + list_add(&sdev->list, &dev_list.dev_list); > > + spin_unlock(&dev_list.lock); > > + > > + if (sdev->use_dma) { > > + ret = starfive_dma_init(sdev); > > + if (ret) { > > + dev_err(dev, "Failed to initialize DMA channel.\n"); > > + goto err_dma_init; > > + } > > + } > > + > > + pages = get_order(STARFIVE_MSG_BUFFER_SIZE); > > + > > + sdev->pages_count = pages >> 1; > > + sdev->data_buf_len = STARFIVE_MSG_BUFFER_SIZE >> 1; > > + > > + /* Initialize crypto engine */ > > + sdev->engine = crypto_engine_alloc_init(dev, 1); > > + if (!sdev->engine) { > > + ret = -ENOMEM; > > + goto err_engine; > > + } > > + > > + ret = crypto_engine_start(sdev->engine); > > + if (ret) > > + goto err_engine_start; > > + > > + dev_info(dev, "Crypto engine started\n"); > > Drop silly probe success messages. > Removing this in the next version. > > + > > + return 0; > > + > > +err_engine_start: > > + crypto_engine_exit(sdev->engine); > > +err_engine: > > + starfive_dma_cleanup(sdev); > > +err_dma_init: > > + spin_lock(&dev_list.lock); > > + list_del(&sdev->list); > > + spin_unlock(&dev_list.lock); > > + > > + return ret; > > +} > > + > > +static int starfive_cryp_remove(struct platform_device *pdev) { > > + struct starfive_sec_dev *sdev = platform_get_drvdata(pdev); > > + > > + if (!sdev) > > + return -ENODEV; > > + > > + crypto_engine_stop(sdev->engine); > > + crypto_engine_exit(sdev->engine); > > + > > + starfive_dma_cleanup(sdev); > > + > > + spin_lock(&dev_list.lock); > > + list_del(&sdev->list); > > + spin_unlock(&dev_list.lock); > > + > > + clk_disable_unprepare(sdev->sec_hclk); > > + clk_disable_unprepare(sdev->sec_ahb); > > + reset_control_assert(sdev->rst_hresetn); > > + > > + return 0; > > +} > > + > > +#ifdef CONFIG_PM > > +static int starfive_cryp_runtime_suspend(struct device *dev) { > > + struct starfive_sec_dev *sdev = dev_get_drvdata(dev); > > + > > + clk_disable_unprepare(sdev->sec_ahb); > > + clk_disable_unprepare(sdev->sec_hclk); > > + > > + return 0; > > +} > > + > > +static int starfive_cryp_runtime_resume(struct device *dev) { > > + struct starfive_sec_dev *sdev = dev_get_drvdata(dev); > > + int ret; > > + > > + ret = clk_prepare_enable(sdev->sec_ahb); > > + if (ret) { > > + dev_err(sdev->dev, "Failed to prepare_enable sec_ahb > clock\n"); > > + return ret; > > + } > > + > > + ret = clk_prepare_enable(sdev->sec_hclk); > > + if (ret) { > > + dev_err(sdev->dev, "Failed to prepare_enable sec_hclk > clock\n"); > > + return ret; > > + } > > + > > + return 0; > > +} > > +#endif > > + > > +static const struct dev_pm_ops starfive_cryp_pm_ops = { > > + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, > > + pm_runtime_force_resume) > > + SET_RUNTIME_PM_OPS(starfive_cryp_runtime_suspend, > > + starfive_cryp_runtime_resume, NULL) }; > > + > > +static struct platform_driver starfive_cryp_driver = { > > + .probe = starfive_cryp_probe, > > + .remove = starfive_cryp_remove, > > + .driver = { > > + .name = DRIVER_NAME, > > + .pm = &starfive_cryp_pm_ops, > > + .of_match_table = starfive_dt_ids, > > + }, > > +}; > > + > > +module_platform_driver(starfive_cryp_driver); > > + > > +MODULE_LICENSE("GPL"); > > +MODULE_DESCRIPTION("StarFive hardware crypto acceleration"); > > diff --git a/drivers/crypto/starfive/starfive-regs.h > > b/drivers/crypto/starfive/starfive-regs.h > > new file mode 100644 > > index 000000000000..0d680cb1f502 > > --- /dev/null > > +++ b/drivers/crypto/starfive/starfive-regs.h > > @@ -0,0 +1,26 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef __STARFIVE_REGS_H__ > > +#define __STARFIVE_REGS_H__ > > + > > +#define STARFIVE_ALG_CR_OFFSET 0x0 > > +#define STARFIVE_ALG_FIFO_OFFSET 0x4 > > +#define STARFIVE_IE_MASK_OFFSET 0x8 > > +#define STARFIVE_IE_FLAG_OFFSET 0xc > > +#define STARFIVE_DMA_IN_LEN_OFFSET 0x10 > > +#define STARFIVE_DMA_OUT_LEN_OFFSET 0x14 > > + > > +union starfive_alg_cr { > > + u32 v; > > + struct { > > + u32 start :1; > > + u32 aes_dma_en :1; > > + u32 rsvd_0 :1; > > + u32 hash_dma_en :1; > > + u32 alg_done :1; > > + u32 rsvd_1 :3; > > + u32 clear :1; > > + u32 rsvd_2 :23; > > + }; > > +}; > > + > > +#endif > > diff --git a/drivers/crypto/starfive/starfive-str.h > > b/drivers/crypto/starfive/starfive-str.h > > new file mode 100644 > > index 000000000000..4ba3c56f0573 > > --- /dev/null > > +++ b/drivers/crypto/starfive/starfive-str.h > > @@ -0,0 +1,74 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef __STARFIVE_STR_H__ > > +#define __STARFIVE_STR_H__ > > + > > +#include <linux/delay.h> > > +#include <linux/dma-mapping.h> > > +#include <linux/dmaengine.h> > > + > > +#include <crypto/engine.h> > > + > > +#include "starfive-regs.h" > > + > > +#define STARFIVE_MSG_BUFFER_SIZE SZ_16K > > + > > +struct starfive_sec_ctx { > > + struct crypto_engine_ctx enginectx; > > + struct starfive_sec_dev *sdev; > > + > > + u8 *buffer; > > +}; > > + > > +struct starfive_sec_dev { > > + struct list_head list; > > + struct device *dev; > > + > > + struct clk *sec_hclk; > > + struct clk *sec_ahb; > > + struct reset_control *rst_hresetn; > > + > > + void __iomem *io_base; > > + phys_addr_t io_phys_base; > > + > > + size_t data_buf_len; > > + int pages_count; > > + u32 use_side_channel_mitigation; > > + u32 use_dma; > > + u32 dma_maxburst; > > + struct dma_chan *sec_xm_m; > > + struct dma_chan *sec_xm_p; > > + struct dma_slave_config cfg_in; > > + struct dma_slave_config cfg_out; > > + struct completion sec_comp_m; > > + struct completion sec_comp_p; > > + > > + struct crypto_engine *engine; > > + > > + union starfive_alg_cr alg_cr; > > +}; > > + > > +static inline u32 starfive_sec_read(struct starfive_sec_dev *sdev, > > +u32 offset) { > > + return __raw_readl(sdev->io_base + offset); > > I don't think these read/write wrappers help anyhow... > These wrappers are used by the crypto primitives in this patch series. I'll move these to subsequent patches when they are first used. Thank you for spending time reviewing and providing helpful comments for this driver. Regards, Jia Jie
On 01/12/2022 07:52, JiaJie Ho wrote: >>> + >>> +static inline u32 starfive_sec_read(struct starfive_sec_dev *sdev, >>> +u32 offset) { >>> + return __raw_readl(sdev->io_base + offset); >> >> I don't think these read/write wrappers help anyhow... >> > > These wrappers are used by the crypto primitives in this patch series. > I'll move these to subsequent patches when they are first used. > > Thank you for spending time reviewing and providing helpful comments > for this driver. > Just drop the wrappers. I said they do not help and your answer "are used" does not explain anything. If you insist on keeping them, please explain what are the benefits except more code and more indirections/layers making it more difficult to read? Best regards, Krzysztof
> -----Original Message----- > From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Sent: Thursday, December 1, 2022 5:29 PM > To: JiaJie Ho <jiajie.ho@starfivetech.com>; Herbert Xu > <herbert@gondor.apana.org.au>; David S . Miller <davem@davemloft.net>; > Rob Herring <robh+dt@kernel.org>; Krzysztof Kozlowski > <krzysztof.kozlowski+dt@linaro.org> > Cc: linux-crypto@vger.kernel.org; devicetree@vger.kernel.org; linux- > kernel@vger.kernel.org; linux-riscv@lists.infradead.org > Subject: Re: [PATCH 1/6] crypto: starfive - Add StarFive crypto engine > support > > On 01/12/2022 07:52, JiaJie Ho wrote: > > >>> + > >>> +static inline u32 starfive_sec_read(struct starfive_sec_dev *sdev, > >>> +u32 offset) { > >>> + return __raw_readl(sdev->io_base + offset); > >> > >> I don't think these read/write wrappers help anyhow... > >> > > > > These wrappers are used by the crypto primitives in this patch series. > > I'll move these to subsequent patches when they are first used. > > > > Thank you for spending time reviewing and providing helpful comments > > for this driver. > > > > Just drop the wrappers. I said they do not help and your answer "are used" > does not explain anything. If you insist on keeping them, please explain what > are the benefits except more code and more indirections/layers making it > more difficult to read? > I'll drop these in the next version. Thanks again for the suggestion. Regards, Jia Jie
diff --git a/MAINTAINERS b/MAINTAINERS index 65140500d9f8..ca189a563a39 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19609,6 +19609,13 @@ F: Documentation/devicetree/bindings/clock/starfive* F: drivers/clk/starfive/ F: include/dt-bindings/clock/starfive* +STARFIVE CRYPTO DRIVER +M: Jia Jie Ho <jiajie.ho@starfivetech.com> +M: William Qiu <william.qiu@starfivetech.com> +S: Maintained +F: Documentation/devicetree/bindings/crypto/starfive* +F: drivers/crypto/starfive/ + STARFIVE PINCTRL DRIVER M: Emil Renner Berthing <kernel@esmil.dk> M: Jianlong Huang <jianlong.huang@starfivetech.com> diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index 55e75fbb658e..64b94376601c 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -817,5 +817,6 @@ config CRYPTO_DEV_SA2UL source "drivers/crypto/keembay/Kconfig" source "drivers/crypto/aspeed/Kconfig" +source "drivers/crypto/starfive/Kconfig" endif # CRYPTO_HW diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile index 116de173a66c..212931c84412 100644 --- a/drivers/crypto/Makefile +++ b/drivers/crypto/Makefile @@ -53,3 +53,4 @@ obj-y += xilinx/ obj-y += hisilicon/ obj-$(CONFIG_CRYPTO_DEV_AMLOGIC_GXL) += amlogic/ obj-y += keembay/ +obj-y += starfive/ diff --git a/drivers/crypto/starfive/Kconfig b/drivers/crypto/starfive/Kconfig new file mode 100644 index 000000000000..f8a2b6ecbddc --- /dev/null +++ b/drivers/crypto/starfive/Kconfig @@ -0,0 +1,20 @@ +# +# StarFive crypto drivers configuration +# + +config CRYPTO_DEV_STARFIVE + tristate "StarFive cryptographic engine driver" + depends on SOC_STARFIVE + select CRYPTO_ENGINE + select CRYPTO_RSA + select CRYPTO_AES + select CRYPTO_CCM + select ARM_AMBA + select DMADEVICES + select AMBA_PL08X + help + Support for StarFive crypto hardware acceleration engine. + This module provides acceleration for public key algo, + skciphers, AEAD and hash functions. + + If you choose 'M' here, this module will be called starfive-crypto. diff --git a/drivers/crypto/starfive/Makefile b/drivers/crypto/starfive/Makefile new file mode 100644 index 000000000000..5a84f808a671 --- /dev/null +++ b/drivers/crypto/starfive/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_CRYPTO_DEV_STARFIVE) += starfive-crypto.o +starfive-crypto-objs := starfive-cryp.o diff --git a/drivers/crypto/starfive/starfive-cryp.c b/drivers/crypto/starfive/starfive-cryp.c new file mode 100644 index 000000000000..574f9e8f4cc1 --- /dev/null +++ b/drivers/crypto/starfive/starfive-cryp.c @@ -0,0 +1,268 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cryptographic API. + * + * Support for StarFive hardware cryptographic engine. + * Copyright (c) 2022 StarFive Technology + * + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/reset.h> + +#include "starfive-str.h" + +#define DRIVER_NAME "starfive-crypto" + +struct starfive_dev_list { + struct list_head dev_list; + spinlock_t lock; /* protect dev_list */ +}; + +static struct starfive_dev_list dev_list = { + .dev_list = LIST_HEAD_INIT(dev_list.dev_list), + .lock = __SPIN_LOCK_UNLOCKED(dev_list.lock), +}; + +struct starfive_sec_dev *starfive_sec_find_dev(struct starfive_sec_ctx *ctx) +{ + struct starfive_sec_dev *sdev = NULL, *tmp; + + spin_lock_bh(&dev_list.lock); + if (!ctx->sdev) { + list_for_each_entry(tmp, &dev_list.dev_list, list) { + sdev = tmp; + break; + } + ctx->sdev = sdev; + } else { + sdev = ctx->sdev; + } + + spin_unlock_bh(&dev_list.lock); + + return sdev; +} + +static const struct of_device_id starfive_dt_ids[] = { + { .compatible = "starfive,jh7110-crypto", .data = NULL}, + {}, +}; +MODULE_DEVICE_TABLE(of, starfive_dt_ids); + +static int starfive_dma_init(struct starfive_sec_dev *sdev) +{ + dma_cap_mask_t mask; + int err; + + sdev->sec_xm_m = NULL; + sdev->sec_xm_p = NULL; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + sdev->sec_xm_m = dma_request_chan(sdev->dev, "sec_m"); + if (IS_ERR(sdev->sec_xm_m)) { + dev_err(sdev->dev, "sec_m dma channel request failed.\n"); + return PTR_ERR(sdev->sec_xm_m); + } + + sdev->sec_xm_p = dma_request_chan(sdev->dev, "sec_p"); + if (IS_ERR(sdev->sec_xm_p)) { + dev_err(sdev->dev, "sec_p dma channel request failed.\n"); + goto err_dma_out; + } + + init_completion(&sdev->sec_comp_m); + init_completion(&sdev->sec_comp_p); + + return 0; + +err_dma_out: + dma_release_channel(sdev->sec_xm_m); + + return err; +} + +static void starfive_dma_cleanup(struct starfive_sec_dev *sdev) +{ + dma_release_channel(sdev->sec_xm_p); + dma_release_channel(sdev->sec_xm_m); +} + +static int starfive_cryp_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct starfive_sec_dev *sdev; + struct resource *res; + int pages = 0; + int ret; + + sdev = devm_kzalloc(dev, sizeof(*sdev), GFP_KERNEL); + if (!sdev) + return -ENOMEM; + + sdev->dev = dev; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "secreg"); + sdev->io_base = devm_ioremap_resource(dev, res); + + if (IS_ERR(sdev->io_base)) + return PTR_ERR(sdev->io_base); + + sdev->use_side_channel_mitigation = + device_property_read_bool(dev, "enable-side-channel-mitigation"); + sdev->use_dma = device_property_read_bool(dev, "enable-dma"); + sdev->dma_maxburst = 32; + + sdev->sec_hclk = devm_clk_get(dev, "sec_hclk"); + if (IS_ERR(sdev->sec_hclk)) { + dev_err(dev, "Failed to get sec_hclk.\n"); + return PTR_ERR(sdev->sec_hclk); + } + + sdev->sec_ahb = devm_clk_get(dev, "sec_ahb"); + if (IS_ERR(sdev->sec_ahb)) { + dev_err(dev, "Failed to get sec_ahb.\n"); + return PTR_ERR(sdev->sec_ahb); + } + + sdev->rst_hresetn = devm_reset_control_get_shared(sdev->dev, "sec_hre"); + if (IS_ERR(sdev->rst_hresetn)) { + dev_err(sdev->dev, "Failed to get sec_hre.\n"); + return PTR_ERR(sdev->rst_hresetn); + } + + clk_prepare_enable(sdev->sec_hclk); + clk_prepare_enable(sdev->sec_ahb); + reset_control_deassert(sdev->rst_hresetn); + + platform_set_drvdata(pdev, sdev); + + spin_lock(&dev_list.lock); + list_add(&sdev->list, &dev_list.dev_list); + spin_unlock(&dev_list.lock); + + if (sdev->use_dma) { + ret = starfive_dma_init(sdev); + if (ret) { + dev_err(dev, "Failed to initialize DMA channel.\n"); + goto err_dma_init; + } + } + + pages = get_order(STARFIVE_MSG_BUFFER_SIZE); + + sdev->pages_count = pages >> 1; + sdev->data_buf_len = STARFIVE_MSG_BUFFER_SIZE >> 1; + + /* Initialize crypto engine */ + sdev->engine = crypto_engine_alloc_init(dev, 1); + if (!sdev->engine) { + ret = -ENOMEM; + goto err_engine; + } + + ret = crypto_engine_start(sdev->engine); + if (ret) + goto err_engine_start; + + dev_info(dev, "Crypto engine started\n"); + + return 0; + +err_engine_start: + crypto_engine_exit(sdev->engine); +err_engine: + starfive_dma_cleanup(sdev); +err_dma_init: + spin_lock(&dev_list.lock); + list_del(&sdev->list); + spin_unlock(&dev_list.lock); + + return ret; +} + +static int starfive_cryp_remove(struct platform_device *pdev) +{ + struct starfive_sec_dev *sdev = platform_get_drvdata(pdev); + + if (!sdev) + return -ENODEV; + + crypto_engine_stop(sdev->engine); + crypto_engine_exit(sdev->engine); + + starfive_dma_cleanup(sdev); + + spin_lock(&dev_list.lock); + list_del(&sdev->list); + spin_unlock(&dev_list.lock); + + clk_disable_unprepare(sdev->sec_hclk); + clk_disable_unprepare(sdev->sec_ahb); + reset_control_assert(sdev->rst_hresetn); + + return 0; +} + +#ifdef CONFIG_PM +static int starfive_cryp_runtime_suspend(struct device *dev) +{ + struct starfive_sec_dev *sdev = dev_get_drvdata(dev); + + clk_disable_unprepare(sdev->sec_ahb); + clk_disable_unprepare(sdev->sec_hclk); + + return 0; +} + +static int starfive_cryp_runtime_resume(struct device *dev) +{ + struct starfive_sec_dev *sdev = dev_get_drvdata(dev); + int ret; + + ret = clk_prepare_enable(sdev->sec_ahb); + if (ret) { + dev_err(sdev->dev, "Failed to prepare_enable sec_ahb clock\n"); + return ret; + } + + ret = clk_prepare_enable(sdev->sec_hclk); + if (ret) { + dev_err(sdev->dev, "Failed to prepare_enable sec_hclk clock\n"); + return ret; + } + + return 0; +} +#endif + +static const struct dev_pm_ops starfive_cryp_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(starfive_cryp_runtime_suspend, + starfive_cryp_runtime_resume, NULL) +}; + +static struct platform_driver starfive_cryp_driver = { + .probe = starfive_cryp_probe, + .remove = starfive_cryp_remove, + .driver = { + .name = DRIVER_NAME, + .pm = &starfive_cryp_pm_ops, + .of_match_table = starfive_dt_ids, + }, +}; + +module_platform_driver(starfive_cryp_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("StarFive hardware crypto acceleration"); diff --git a/drivers/crypto/starfive/starfive-regs.h b/drivers/crypto/starfive/starfive-regs.h new file mode 100644 index 000000000000..0d680cb1f502 --- /dev/null +++ b/drivers/crypto/starfive/starfive-regs.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __STARFIVE_REGS_H__ +#define __STARFIVE_REGS_H__ + +#define STARFIVE_ALG_CR_OFFSET 0x0 +#define STARFIVE_ALG_FIFO_OFFSET 0x4 +#define STARFIVE_IE_MASK_OFFSET 0x8 +#define STARFIVE_IE_FLAG_OFFSET 0xc +#define STARFIVE_DMA_IN_LEN_OFFSET 0x10 +#define STARFIVE_DMA_OUT_LEN_OFFSET 0x14 + +union starfive_alg_cr { + u32 v; + struct { + u32 start :1; + u32 aes_dma_en :1; + u32 rsvd_0 :1; + u32 hash_dma_en :1; + u32 alg_done :1; + u32 rsvd_1 :3; + u32 clear :1; + u32 rsvd_2 :23; + }; +}; + +#endif diff --git a/drivers/crypto/starfive/starfive-str.h b/drivers/crypto/starfive/starfive-str.h new file mode 100644 index 000000000000..4ba3c56f0573 --- /dev/null +++ b/drivers/crypto/starfive/starfive-str.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __STARFIVE_STR_H__ +#define __STARFIVE_STR_H__ + +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> + +#include <crypto/engine.h> + +#include "starfive-regs.h" + +#define STARFIVE_MSG_BUFFER_SIZE SZ_16K + +struct starfive_sec_ctx { + struct crypto_engine_ctx enginectx; + struct starfive_sec_dev *sdev; + + u8 *buffer; +}; + +struct starfive_sec_dev { + struct list_head list; + struct device *dev; + + struct clk *sec_hclk; + struct clk *sec_ahb; + struct reset_control *rst_hresetn; + + void __iomem *io_base; + phys_addr_t io_phys_base; + + size_t data_buf_len; + int pages_count; + u32 use_side_channel_mitigation; + u32 use_dma; + u32 dma_maxburst; + struct dma_chan *sec_xm_m; + struct dma_chan *sec_xm_p; + struct dma_slave_config cfg_in; + struct dma_slave_config cfg_out; + struct completion sec_comp_m; + struct completion sec_comp_p; + + struct crypto_engine *engine; + + union starfive_alg_cr alg_cr; +}; + +static inline u32 starfive_sec_read(struct starfive_sec_dev *sdev, u32 offset) +{ + return __raw_readl(sdev->io_base + offset); +} + +static inline u8 starfive_sec_readb(struct starfive_sec_dev *sdev, u32 offset) +{ + return __raw_readb(sdev->io_base + offset); +} + +static inline void starfive_sec_write(struct starfive_sec_dev *sdev, + u32 offset, u32 value) +{ + __raw_writel(value, sdev->io_base + offset); +} + +static inline void starfive_sec_writeb(struct starfive_sec_dev *sdev, + u32 offset, u8 value) +{ + __raw_writeb(value, sdev->io_base + offset); +} + +struct starfive_sec_dev *starfive_sec_find_dev(struct starfive_sec_ctx *ctx); + +#endif