diff mbox series

arm64: dts: qcom: sm7225-fairphone-fp4: Add pmk8350 PMIC

Message ID 20221207084045.270172-1-luca.weiss@fairphone.com
State Accepted
Commit 582e7c1026fa848a918a1db159bcae7c5fa7f0ce
Headers show
Series arm64: dts: qcom: sm7225-fairphone-fp4: Add pmk8350 PMIC | expand

Commit Message

Luca Weiss Dec. 7, 2022, 8:40 a.m. UTC
The PMK8350 (which is actually a PMK8003) is used for the RTC and has
ADC for thermals.

Since the adc_tm compatible used in PMK8350 is not yet supported, skip
configuring that and the associated thermal zone for now.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 .../boot/dts/qcom/sm7225-fairphone-fp4.dts    | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

Comments

Konrad Dybcio Dec. 7, 2022, 8:51 a.m. UTC | #1
On 07/12/2022 09:40, Luca Weiss wrote:
> The PMK8350 (which is actually a PMK8003) is used for the RTC and has
> ADC for thermals.
> 
> Since the adc_tm compatible used in PMK8350 is not yet supported, skip
> configuring that and the associated thermal zone for now.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>   .../boot/dts/qcom/sm7225-fairphone-fp4.dts    | 19 +++++++++++++++++++
>   1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> index c456e9594ea5..df05e5dc8696 100644
> --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> @@ -5,7 +5,11 @@
>   
>   /dts-v1/;
>   
> +/* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */
> +#define PMK8350_SID 6
> +
>   #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
>   #include <dt-bindings/input/input.h>
>   #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
>   #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> @@ -13,6 +17,7 @@
>   #include "pm6150l.dtsi"
>   #include "pm6350.dtsi"
>   #include "pm7250b.dtsi"
> +#include "pmk8350.dtsi"
>   
>   / {
>   	model = "Fairphone 4";
> @@ -426,6 +431,20 @@ conn-therm@1 {
>   	};
>   };
>   
> +&pmk8350_rtc {
> +	status = "okay";
> +};
> +
> +&pmk8350_vadc {
> +	adc-chan@644 {
> +		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
> +		qcom,ratiometric;
> +		qcom,hw-settle-time = <200>;
> +		qcom,pre-scaling = <1 1>;
> +		label = "xo_therm";
> +	};
> +};
> +
>   &qupv3_id_1 {
>   	status = "okay";
>   };
Bjorn Andersson Dec. 28, 2022, 4:36 a.m. UTC | #2
On Wed, 7 Dec 2022 09:40:45 +0100, Luca Weiss wrote:
> The PMK8350 (which is actually a PMK8003) is used for the RTC and has
> ADC for thermals.
> 
> Since the adc_tm compatible used in PMK8350 is not yet supported, skip
> configuring that and the associated thermal zone for now.
> 
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: qcom: sm7225-fairphone-fp4: Add pmk8350 PMIC
      commit: 582e7c1026fa848a918a1db159bcae7c5fa7f0ce

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index c456e9594ea5..df05e5dc8696 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -5,7 +5,11 @@ 
 
 /dts-v1/;
 
+/* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */
+#define PMK8350_SID 6
+
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -13,6 +17,7 @@ 
 #include "pm6150l.dtsi"
 #include "pm6350.dtsi"
 #include "pm7250b.dtsi"
+#include "pmk8350.dtsi"
 
 / {
 	model = "Fairphone 4";
@@ -426,6 +431,20 @@  conn-therm@1 {
 	};
 };
 
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pmk8350_vadc {
+	adc-chan@644 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "xo_therm";
+	};
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };