diff mbox series

cpufreq: qcom-hw: Fix reading "reg" with address/size-cells != 2

Message ID 20221209150759.396255-1-konrad.dybcio@linaro.org
State Superseded
Headers show
Series cpufreq: qcom-hw: Fix reading "reg" with address/size-cells != 2 | expand

Commit Message

Konrad Dybcio Dec. 9, 2022, 3:07 p.m. UTC
Commit 054a3ef683a1 ("cpufreq: qcom-hw: Allocate qcom_cpufreq_data during
probe") assumed that every reg variable is 4*u32 wide (as most new qcom
SoCs set #address- and #size-cells to <2>. That is not the case for all of
them though. Check the cells values dynamically to ensure the proper
region of the DTB is being read.

Fixes: 054a3ef683a1 ("cpufreq: qcom-hw: Allocate qcom_cpufreq_data during probe")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/cpufreq/qcom-cpufreq-hw.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

Comments

Viresh Kumar Dec. 12, 2022, 6:44 a.m. UTC | #1
On 09-12-22, 16:07, Konrad Dybcio wrote:
> Commit 054a3ef683a1 ("cpufreq: qcom-hw: Allocate qcom_cpufreq_data during
> probe") assumed that every reg variable is 4*u32 wide (as most new qcom

                                                        corresponding ")" is missing.

> SoCs set #address- and #size-cells to <2>. That is not the case for all of
> them though. Check the cells values dynamically to ensure the proper
> region of the DTB is being read.
> 
> Fixes: 054a3ef683a1 ("cpufreq: qcom-hw: Allocate qcom_cpufreq_data during probe")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>  drivers/cpufreq/qcom-cpufreq-hw.c | 20 ++++++++++++++++++--
>  1 file changed, 18 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
> index 340fed35e45d..22f48f789557 100644
> --- a/drivers/cpufreq/qcom-cpufreq-hw.c
> +++ b/drivers/cpufreq/qcom-cpufreq-hw.c
> @@ -649,9 +649,10 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
>  {
>  	struct clk_hw_onecell_data *clk_data;
>  	struct device *dev = &pdev->dev;
> +	struct device_node *soc_node;
>  	struct device *cpu_dev;
>  	struct clk *clk;
> -	int ret, i, num_domains;
> +	int ret, i, num_domains, reg_sz;
>  
>  	clk = clk_get(dev, "xo");
>  	if (IS_ERR(clk))
> @@ -679,7 +680,22 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
>  		return ret;
>  
>  	/* Allocate qcom_cpufreq_data based on the available frequency domains in DT */
> -	num_domains = of_property_count_elems_of_size(dev->of_node, "reg", sizeof(u32) * 4);
> +	soc_node = of_get_parent(dev->of_node);

This must be dropped on failures later ?

> +	if (!soc_node)
> +		return -EINVAL;
> +
> +	ret = of_property_read_u32(soc_node, "#address-cells", &reg_sz);
> +	if (ret)
> +		return ret;
> +
> +	/* Reuse 'i', as it's only used later in the loop */

This can be dropped in my opinion.

> +	ret = of_property_read_u32(soc_node, "#size-cells", &i);

Should i be initialized ?

> +	if (ret)
> +		return ret;
> +
> +	reg_sz += i;
> +
> +	num_domains = of_property_count_elems_of_size(dev->of_node, "reg", sizeof(u32) * reg_sz);
>  	if (num_domains <= 0)
>  		return num_domains;
>  
> -- 
> 2.38.1
Konrad Dybcio Dec. 12, 2022, 9:10 a.m. UTC | #2
On 12.12.2022 07:44, Viresh Kumar wrote:
> On 09-12-22, 16:07, Konrad Dybcio wrote:
>> Commit 054a3ef683a1 ("cpufreq: qcom-hw: Allocate qcom_cpufreq_data during
>> probe") assumed that every reg variable is 4*u32 wide (as most new qcom
> 
>                                                         corresponding ")" is missing.
> 
>> SoCs set #address- and #size-cells to <2>. That is not the case for all of
>> them though. Check the cells values dynamically to ensure the proper
>> region of the DTB is being read.
>>
>> Fixes: 054a3ef683a1 ("cpufreq: qcom-hw: Allocate qcom_cpufreq_data during probe")
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>> ---
>>  drivers/cpufreq/qcom-cpufreq-hw.c | 20 ++++++++++++++++++--
>>  1 file changed, 18 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
>> index 340fed35e45d..22f48f789557 100644
>> --- a/drivers/cpufreq/qcom-cpufreq-hw.c
>> +++ b/drivers/cpufreq/qcom-cpufreq-hw.c
>> @@ -649,9 +649,10 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
>>  {
>>  	struct clk_hw_onecell_data *clk_data;
>>  	struct device *dev = &pdev->dev;
>> +	struct device_node *soc_node;
>>  	struct device *cpu_dev;
>>  	struct clk *clk;
>> -	int ret, i, num_domains;
>> +	int ret, i, num_domains, reg_sz;
>>  
>>  	clk = clk_get(dev, "xo");
>>  	if (IS_ERR(clk))
>> @@ -679,7 +680,22 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
>>  		return ret;
>>  
>>  	/* Allocate qcom_cpufreq_data based on the available frequency domains in DT */
>> -	num_domains = of_property_count_elems_of_size(dev->of_node, "reg", sizeof(u32) * 4);
>> +	soc_node = of_get_parent(dev->of_node);
> 
> This must be dropped on failures later ?
Right.

> 
>> +	if (!soc_node)
>> +		return -EINVAL;
>> +
>> +	ret = of_property_read_u32(soc_node, "#address-cells", &reg_sz);
>> +	if (ret)
>> +		return ret;
>> +
>> +	/* Reuse 'i', as it's only used later in the loop */
> 
> This can be dropped in my opinion.
Sure.

> 
>> +	ret = of_property_read_u32(soc_node, "#size-cells", &i);
> 
> Should i be initialized ?
Why? If this call succeeds, i is never read before being assigned
a value, and if it fails, the probe function will exit with an
error.

Konrad
> 
>> +	if (ret)
>> +		return ret;
>> +
>> +	reg_sz += i;
>> +
>> +	num_domains = of_property_count_elems_of_size(dev->of_node, "reg", sizeof(u32) * reg_sz);
>>  	if (num_domains <= 0)
>>  		return num_domains;
>>  
>> -- 
>> 2.38.1
>
diff mbox series

Patch

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index 340fed35e45d..22f48f789557 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -649,9 +649,10 @@  static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
 {
 	struct clk_hw_onecell_data *clk_data;
 	struct device *dev = &pdev->dev;
+	struct device_node *soc_node;
 	struct device *cpu_dev;
 	struct clk *clk;
-	int ret, i, num_domains;
+	int ret, i, num_domains, reg_sz;
 
 	clk = clk_get(dev, "xo");
 	if (IS_ERR(clk))
@@ -679,7 +680,22 @@  static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
 		return ret;
 
 	/* Allocate qcom_cpufreq_data based on the available frequency domains in DT */
-	num_domains = of_property_count_elems_of_size(dev->of_node, "reg", sizeof(u32) * 4);
+	soc_node = of_get_parent(dev->of_node);
+	if (!soc_node)
+		return -EINVAL;
+
+	ret = of_property_read_u32(soc_node, "#address-cells", &reg_sz);
+	if (ret)
+		return ret;
+
+	/* Reuse 'i', as it's only used later in the loop */
+	ret = of_property_read_u32(soc_node, "#size-cells", &i);
+	if (ret)
+		return ret;
+
+	reg_sz += i;
+
+	num_domains = of_property_count_elems_of_size(dev->of_node, "reg", sizeof(u32) * reg_sz);
 	if (num_domains <= 0)
 		return num_domains;