@@ -614,6 +614,7 @@ static void write_bootloader_nanomips(uint8_t *base, uint64_t run_addr,
uint64_t kernel_entry)
{
uint16_t *p;
+ void *v;
/* Small bootloader */
p = (uint16_t *)base;
@@ -687,13 +688,13 @@ static void write_bootloader_nanomips(uint8_t *base, uint64_t run_addr,
*
* - set up PCI0 I/O BARs from 0x18000000 to 0x181fffff
* - set up PCI0 MEM0 at 0x10000000, size 0x8000000
- * - set up PCI0 MEM1 at 0x18200000, size 0xbe00000
*
*/
stw_p(p++, 0xe040); stw_p(p++, 0x0681);
/* lui t1, %hi(0xb4000000) */
#if TARGET_BIG_ENDIAN
+#define cpu_to_gt32 cpu_to_le32
stw_p(p++, 0xe020); stw_p(p++, 0x0be1);
/* lui t0, %hi(0xdf000000) */
@@ -736,14 +737,8 @@ static void write_bootloader_nanomips(uint8_t *base, uint64_t run_addr,
stw_p(p++, 0xe020); stw_p(p++, 0x0821);
/* lui t0, %hi(0xc1000000) */
- /* 0x80 corresponds to GT_PCI0M1LD */
- stw_p(p++, 0x8422); stw_p(p++, 0x9080);
- /* sw t0, 0x80(t1) */
-
- stw_p(p++, 0xe020); stw_p(p++, 0x0bc0);
- /* lui t0, %hi(0x5e000000) */
-
#else
+#define cpu_to_gt32 cpu_to_be32
stw_p(p++, 0x0020); stw_p(p++, 0x00df);
/* addiu[32] t0, $0, 0xdf */
@@ -786,19 +781,20 @@ static void write_bootloader_nanomips(uint8_t *base, uint64_t run_addr,
stw_p(p++, 0x0020); stw_p(p++, 0x00c1);
/* addiu[32] t0, $0, 0xc1 */
-
- /* 0x80 corresponds to GT_PCI0M1LD */
- stw_p(p++, 0x8422); stw_p(p++, 0x9080);
- /* sw t0, 0x80(t1) */
-
- stw_p(p++, 0x0020); stw_p(p++, 0x005e);
- /* addiu[32] t0, $0, 0x5e */
-
#endif
+ v = p;
- /* 0x88 corresponds to GT_PCI0M1HD */
- stw_p(p++, 0x8422); stw_p(p++, 0x9088);
- /* sw t0, 0x88(t1) */
+ /* setup PCI0 mem windows */
+ bl_gen_write_u32(&v, /* GT_PCI0M1LD */
+ cpu_mips_phys_to_kseg1(NULL, 0x1be00000 + 0x80),
+ cpu_to_gt32(0x18200000 << 3));
+ bl_gen_write_u32(&v, /* GT_PCI0M1HD */
+ cpu_mips_phys_to_kseg1(NULL, 0x1be00000 + 0x88),
+ cpu_to_gt32(0x0bc00000 << 3));
+
+ p = v;
+
+#undef cpu_to_gt32
stw_p(p++, 0xe320 | NM_HI1(kernel_entry));
Similarly to how commit 0c8427baf0 ("hw/mips/malta: Use bootloader helper to set BAR registers") converted write_bootloader(), convert the equivalent write_bootloader_nanomips(), allowing us to modify the bootloader code more easily in the future. Part 1/5: Convert PCI0 MEM1 BAR setup Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/mips/malta.c | 34 +++++++++++++++------------------- 1 file changed, 15 insertions(+), 19 deletions(-)