diff mbox

[RFC,v3,11/12] ARM64: dts: Add PSCI cpuidle support for MSM8916

Message ID 1456866931-37851-13-git-send-email-lina.iyer@linaro.org
State New
Headers show

Commit Message

Lina Iyer March 1, 2016, 9:15 p.m. UTC
Add device bindings for CPUs to suspend using PSCI as the enable-method.

Cc: <devicetree@vger.kernel.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>

---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 9153214..b7839a8 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -61,27 +61,51 @@ 
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SPC>;
 		};
 
 		CPU1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SPC>;
 		};
 
 		CPU2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SPC>;
 		};
 
 		CPU3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		idle-states {
+			CPU_SPC: spc {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000002>;
+				entry-latency-us = <130>;
+				exit-latency-us = <150>;
+				min-residency-us = <2000>;
+				local-timer-stop;
+			};
 		};
 	};
 
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,