diff mbox series

[v2,1/3] arm64: dts: qcom: sm6115: Cleanup USB node's label

Message ID 20221214203124.564537-2-bhupesh.sharma@linaro.org
State New
Headers show
Series arm64: dts: sm6115: Add USB SS qmp phy node and perform some cleanups | expand

Commit Message

Bhupesh Sharma Dec. 14, 2022, 8:31 p.m. UTC
There is only one USB controller present on SM6115 / SM4250
Qualcomm SoC, so drop the numbering used with USB node's label
names in the dtsi and the related sm4250-oneplus-billie2.dts.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts | 4 ++--
 arch/arm64/boot/dts/qcom/sm6115.dtsi                | 8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
index a3f1c7c41fd73..fa57f4bf58256 100644
--- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -225,11 +225,11 @@  &ufs_mem_phy {
 	status = "okay";
 };
 
-&usb_1 {
+&usb {
 	status = "okay";
 };
 
-&usb_1_hsphy {
+&usb_hsphy {
 	vdd-supply = <&vreg_l4a>;
 	vdda-pll-supply = <&vreg_l12a>;
 	vdda-phy-dpdm-supply = <&vreg_l15a>;
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 572bf04adf906..b5f7480c2e713 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -565,7 +565,7 @@  gcc: clock-controller@1400000 {
 			#power-domain-cells = <1>;
 		};
 
-		usb_1_hsphy: phy@1613000 {
+		usb_hsphy: phy@1613000 {
 			compatible = "qcom,sm6115-qusb2-phy";
 			reg = <0x01613000 0x180>;
 			#phy-cells = <0>;
@@ -991,7 +991,7 @@  spi5: spi@4a94000 {
 			};
 		};
 
-		usb_1: usb@4ef8800 {
+		usb: usb@4ef8800 {
 			compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
 			reg = <0x04ef8800 0x400>;
 			#address-cells = <1>;
@@ -1019,11 +1019,11 @@  usb_1: usb@4ef8800 {
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
 
-			usb_1_dwc3: usb@4e00000 {
+			usb_dwc3: usb@4e00000 {
 				compatible = "snps,dwc3";
 				reg = <0x04e00000 0xcd00>;
 				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb_1_hsphy>;
+				phys = <&usb_hsphy>;
 				phy-names = "usb2-phy";
 				iommus = <&apps_smmu 0x120 0x0>;
 				snps,dis_u2_susphy_quirk;