diff mbox series

[v2,1/8] drm/msm/dpu: Wire up DSC mask for active CTL configuration

Message ID 20221221231943.1961117-2-marijn.suijten@somainline.org
State Accepted
Commit cda3774c242e156cdcc279bd36b404af89f744c6
Headers show
Series drm/msm: DSC Electric Boogaloo for sm8[12]50 | expand

Commit Message

Marijn Suijten Dec. 21, 2022, 11:19 p.m. UTC
Active CTLs have to configure what DSC block(s) have to be enabled, and
what DSC block(s) have to be flushed; this value was initialized to zero
resulting in the necessary register writes to never happen (or would
write zero otherwise).  This seems to have gotten lost in the DSC v4->v5
series while refactoring how the combination with merge_3d was handled.

Fixes: 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in encoder")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 1 +
 2 files changed, 2 insertions(+)

Comments

Dmitry Baryshkov Jan. 8, 2023, 11:23 p.m. UTC | #1
On 22/12/2022 01:19, Marijn Suijten wrote:
> Active CTLs have to configure what DSC block(s) have to be enabled, and
> what DSC block(s) have to be flushed; this value was initialized to zero
> resulting in the necessary register writes to never happen (or would
> write zero otherwise).  This seems to have gotten lost in the DSC v4->v5
> series while refactoring how the combination with merge_3d was handled.
> 
> Fixes: 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in encoder")
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 1 +
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 1 +
>   2 files changed, 2 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index ae28b2b93e69..35791f93c33d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -61,6 +61,7 @@  static void _dpu_encoder_phys_cmd_update_intf_cfg(
 	intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_CMD;
 	intf_cfg.stream_sel = cmd_enc->stream_sel;
 	intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
+	intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
 	ctl->ops.setup_intf_cfg(ctl, &intf_cfg);
 
 	/* setup which pp blk will connect to this intf */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index 0f71e8fe7be7..9ee3a7306a5f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -274,6 +274,7 @@  static void dpu_encoder_phys_vid_setup_timing_engine(
 	intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_VID;
 	intf_cfg.stream_sel = 0; /* Don't care value for video mode */
 	intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
+	intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
 	if (phys_enc->hw_pp->merge_3d)
 		intf_cfg.merge_3d = phys_enc->hw_pp->merge_3d->idx;