diff mbox series

dt-bindings: pinctrl: imx8m: Integrate duplicated i.MX 8M schemas

Message ID 20221223030708.91459-1-peng.fan@oss.nxp.com
State Superseded
Headers show
Series dt-bindings: pinctrl: imx8m: Integrate duplicated i.MX 8M schemas | expand

Commit Message

Peng Fan (OSS) Dec. 23, 2022, 3:07 a.m. UTC
From: Peng Fan <peng.fan@nxp.com>

The i.MX8MM/N/P/Q IOMUXC schemas are basically the same, it does not to
have four schemas for almost the same binding.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 ...mm-pinctrl.yaml => fsl,imx8m-pinctrl.yaml} | 16 ++--
 .../bindings/pinctrl/fsl,imx8mn-pinctrl.yaml  | 84 -------------------
 .../bindings/pinctrl/fsl,imx8mp-pinctrl.yaml  | 84 -------------------
 .../bindings/pinctrl/fsl,imx8mq-pinctrl.yaml  | 84 -------------------
 4 files changed, 10 insertions(+), 258 deletions(-)
 rename Documentation/devicetree/bindings/pinctrl/{fsl,imx8mm-pinctrl.yaml => fsl,imx8m-pinctrl.yaml} (82%)
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml

Comments

Marco Felsch Dec. 23, 2022, 8:39 a.m. UTC | #1
Hi Peng,

On 22-12-23, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> The i.MX8MM/N/P/Q IOMUXC schemas are basically the same, it does not to
> have four schemas for almost the same binding.

Nice, just two nits see below.

> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  ...mm-pinctrl.yaml => fsl,imx8m-pinctrl.yaml} | 16 ++--
>  .../bindings/pinctrl/fsl,imx8mn-pinctrl.yaml  | 84 -------------------
>  .../bindings/pinctrl/fsl,imx8mp-pinctrl.yaml  | 84 -------------------
>  .../bindings/pinctrl/fsl,imx8mq-pinctrl.yaml  | 84 -------------------
>  4 files changed, 10 insertions(+), 258 deletions(-)
>  rename Documentation/devicetree/bindings/pinctrl/{fsl,imx8mm-pinctrl.yaml => fsl,imx8m-pinctrl.yaml} (82%)
>  delete mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
>  delete mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
>  delete mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
> similarity index 82%
> rename from Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
> rename to Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
> index 6717f163390b..949d962a97b4 100644
> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
> @@ -1,13 +1,13 @@
>  # SPDX-License-Identifier: GPL-2.0
>  %YAML 1.2
>  ---
> -$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mm-pinctrl.yaml#
> +$id: http://devicetree.org/schemas/pinctrl/fsl,imx8m-pinctrl.yaml#
>  $schema: http://devicetree.org/meta-schemas/core.yaml#
>  
> -title: Freescale IMX8MM IOMUX Controller
> +title: Freescale IMX8M IOMUX Controller
>  
>  maintainers:
> -  - Anson Huang <Anson.Huang@nxp.com>
> +  - Peng Fan <peng.fan@nxp.com>
>  
>  description:
>    Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
> @@ -15,7 +15,11 @@ description:
>  
>  properties:
>    compatible:
> -    const: fsl,imx8mm-iomuxc
> +    enum:
> +      - fsl,imx8mm-iomuxc
> +      - fsl,imx8mn-iomuxc
> +      - fsl,imx8mp-iomuxc
> +      - fsl,imx8mq-iomuxc
>  
>    reg:
>      maxItems: 1
> @@ -34,9 +38,9 @@ patternProperties:
>            each entry consists of 6 integers and represents the mux and config
>            setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
>            mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
> -          be found in <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last
> +          be found in <arch/arm64/boot/dts/freescale/imx8m[m,n,p,q]-pinfunc.h>. The last
>            integer CONFIG is the pad setting value like pull-up on this pin. Please
> -          refer to i.MX8M Mini Reference Manual for detailed CONFIG settings.
> +          refer to i.MX8M Quad/Mini/Nano/Plus  Reference Manual for detailed CONFIG settings.
						 ^
				 duplicated whitespace and the line
				 looks rather long. Are these 80chars?

Regards,
  Marco


>          $ref: /schemas/types.yaml#/definitions/uint32-matrix
>          items:
>            items:
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
> deleted file mode 100644
> index b1cdbb56d4e4..000000000000
> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
> +++ /dev/null
> @@ -1,84 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0
> -%YAML 1.2
> ----
> -$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mn-pinctrl.yaml#
> -$schema: http://devicetree.org/meta-schemas/core.yaml#
> -
> -title: Freescale IMX8MN IOMUX Controller
> -
> -maintainers:
> -  - Anson Huang <Anson.Huang@nxp.com>
> -
> -description:
> -  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
> -  for common binding part and usage.
> -
> -properties:
> -  compatible:
> -    const: fsl,imx8mn-iomuxc
> -
> -  reg:
> -    maxItems: 1
> -
> -# Client device subnode's properties
> -patternProperties:
> -  'grp$':
> -    type: object
> -    description:
> -      Pinctrl node's client devices use subnodes for desired pin configuration.
> -      Client device subnodes use below standard properties.
> -
> -    properties:
> -      fsl,pins:
> -        description:
> -          each entry consists of 6 integers and represents the mux and config
> -          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
> -          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
> -          be found in <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last
> -          integer CONFIG is the pad setting value like pull-up on this pin. Please
> -          refer to i.MX8M Nano Reference Manual for detailed CONFIG settings.
> -        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> -        items:
> -          items:
> -            - description: |
> -                "mux_reg" indicates the offset of mux register.
> -            - description: |
> -                "conf_reg" indicates the offset of pad configuration register.
> -            - description: |
> -                "input_reg" indicates the offset of select input register.
> -            - description: |
> -                "mux_val" indicates the mux value to be applied.
> -            - description: |
> -                "input_val" indicates the select input value to be applied.
> -            - description: |
> -                "pad_setting" indicates the pad configuration value to be applied.
> -
> -    required:
> -      - fsl,pins
> -
> -    additionalProperties: false
> -
> -allOf:
> -  - $ref: "pinctrl.yaml#"
> -
> -required:
> -  - compatible
> -  - reg
> -
> -additionalProperties: false
> -
> -examples:
> -  # Pinmux controller node
> -  - |
> -    iomuxc: pinctrl@30330000 {
> -        compatible = "fsl,imx8mn-iomuxc";
> -        reg = <0x30330000 0x10000>;
> -
> -        pinctrl_uart2: uart2grp {
> -            fsl,pins =
> -                <0x23C 0x4A4 0x4FC 0x0 0x0	0x140>,
> -                <0x240 0x4A8 0x000 0x0 0x0	0x140>;
> -        };
> -    };
> -
> -...
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
> deleted file mode 100644
> index 4eed3a4e153a..000000000000
> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
> +++ /dev/null
> @@ -1,84 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0
> -%YAML 1.2
> ----
> -$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mp-pinctrl.yaml#
> -$schema: http://devicetree.org/meta-schemas/core.yaml#
> -
> -title: Freescale IMX8MP IOMUX Controller
> -
> -maintainers:
> -  - Anson Huang <Anson.Huang@nxp.com>
> -
> -description:
> -  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
> -  for common binding part and usage.
> -
> -properties:
> -  compatible:
> -    const: fsl,imx8mp-iomuxc
> -
> -  reg:
> -    maxItems: 1
> -
> -# Client device subnode's properties
> -patternProperties:
> -  'grp$':
> -    type: object
> -    description:
> -      Pinctrl node's client devices use subnodes for desired pin configuration.
> -      Client device subnodes use below standard properties.
> -
> -    properties:
> -      fsl,pins:
> -        description:
> -          each entry consists of 6 integers and represents the mux and config
> -          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
> -          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
> -          be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
> -          integer CONFIG is the pad setting value like pull-up on this pin. Please
> -          refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
> -        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> -        items:
> -          items:
> -            - description: |
> -                "mux_reg" indicates the offset of mux register.
> -            - description: |
> -                "conf_reg" indicates the offset of pad configuration register.
> -            - description: |
> -                "input_reg" indicates the offset of select input register.
> -            - description: |
> -                "mux_val" indicates the mux value to be applied.
> -            - description: |
> -                "input_val" indicates the select input value to be applied.
> -            - description: |
> -                "pad_setting" indicates the pad configuration value to be applied.
> -
> -    required:
> -      - fsl,pins
> -
> -    additionalProperties: false
> -
> -allOf:
> -  - $ref: "pinctrl.yaml#"
> -
> -required:
> -  - compatible
> -  - reg
> -
> -additionalProperties: false
> -
> -examples:
> -  # Pinmux controller node
> -  - |
> -    iomuxc: pinctrl@30330000 {
> -        compatible = "fsl,imx8mp-iomuxc";
> -        reg = <0x30330000 0x10000>;
> -
> -        pinctrl_uart2: uart2grp {
> -            fsl,pins =
> -                <0x228 0x488 0x5F0 0x0 0x6	0x49>,
> -                <0x228 0x488 0x000 0x0 0x0	0x49>;
> -        };
> -    };
> -
> -...
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
> deleted file mode 100644
> index d4a8ea5551a5..000000000000
> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
> +++ /dev/null
> @@ -1,84 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0
> -%YAML 1.2
> ----
> -$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mq-pinctrl.yaml#
> -$schema: http://devicetree.org/meta-schemas/core.yaml#
> -
> -title: Freescale IMX8MQ IOMUX Controller
> -
> -maintainers:
> -  - Anson Huang <Anson.Huang@nxp.com>
> -
> -description:
> -  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
> -  for common binding part and usage.
> -
> -properties:
> -  compatible:
> -    const: fsl,imx8mq-iomuxc
> -
> -  reg:
> -    maxItems: 1
> -
> -# Client device subnode's properties
> -patternProperties:
> -  'grp$':
> -    type: object
> -    description:
> -      Pinctrl node's client devices use subnodes for desired pin configuration.
> -      Client device subnodes use below standard properties.
> -
> -    properties:
> -      fsl,pins:
> -        description:
> -          each entry consists of 6 integers and represents the mux and config
> -          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
> -          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
> -          be found in <arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h>. The last
> -          integer CONFIG is the pad setting value like pull-up on this pin. Please
> -          refer to i.MX8M Quad Reference Manual for detailed CONFIG settings.
> -        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> -        items:
> -          items:
> -            - description: |
> -                "mux_reg" indicates the offset of mux register.
> -            - description: |
> -                "conf_reg" indicates the offset of pad configuration register.
> -            - description: |
> -                "input_reg" indicates the offset of select input register.
> -            - description: |
> -                "mux_val" indicates the mux value to be applied.
> -            - description: |
> -                "input_val" indicates the select input value to be applied.
> -            - description: |
> -                "pad_setting" indicates the pad configuration value to be applied.
> -
> -    required:
> -      - fsl,pins
> -
> -    additionalProperties: false
> -
> -allOf:
> -  - $ref: "pinctrl.yaml#"
> -
> -required:
> -  - compatible
> -  - reg
> -
> -additionalProperties: false
> -
> -examples:
> -  # Pinmux controller node
> -  - |
> -    iomuxc: pinctrl@30330000 {
> -        compatible = "fsl,imx8mq-iomuxc";
> -        reg = <0x30330000 0x10000>;
> -
> -        pinctrl_uart1: uart1grp {
> -            fsl,pins =
> -                <0x234 0x49C 0x4F4 0x0 0x0	0x49>,
> -                <0x238 0x4A0 0x4F4 0x0 0x0	0x49>;
> -        };
> -    };
> -
> -...
> -- 
> 2.37.1
> 
> 
>
Rob Herring (Arm) Dec. 26, 2022, 6:53 p.m. UTC | #2
On Fri, 23 Dec 2022 11:07:08 +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> The i.MX8MM/N/P/Q IOMUXC schemas are basically the same, it does not to
> have four schemas for almost the same binding.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  ...mm-pinctrl.yaml => fsl,imx8m-pinctrl.yaml} | 16 ++--
>  .../bindings/pinctrl/fsl,imx8mn-pinctrl.yaml  | 84 -------------------
>  .../bindings/pinctrl/fsl,imx8mp-pinctrl.yaml  | 84 -------------------
>  .../bindings/pinctrl/fsl,imx8mq-pinctrl.yaml  | 84 -------------------
>  4 files changed, 10 insertions(+), 258 deletions(-)
>  rename Documentation/devicetree/bindings/pinctrl/{fsl,imx8mm-pinctrl.yaml => fsl,imx8m-pinctrl.yaml} (82%)
>  delete mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
>  delete mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
>  delete mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
similarity index 82%
rename from Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
rename to Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
index 6717f163390b..949d962a97b4 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
@@ -1,13 +1,13 @@ 
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mm-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx8m-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale IMX8MM IOMUX Controller
+title: Freescale IMX8M IOMUX Controller
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Peng Fan <peng.fan@nxp.com>
 
 description:
   Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
@@ -15,7 +15,11 @@  description:
 
 properties:
   compatible:
-    const: fsl,imx8mm-iomuxc
+    enum:
+      - fsl,imx8mm-iomuxc
+      - fsl,imx8mn-iomuxc
+      - fsl,imx8mp-iomuxc
+      - fsl,imx8mq-iomuxc
 
   reg:
     maxItems: 1
@@ -34,9 +38,9 @@  patternProperties:
           each entry consists of 6 integers and represents the mux and config
           setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
           mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
-          be found in <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last
+          be found in <arch/arm64/boot/dts/freescale/imx8m[m,n,p,q]-pinfunc.h>. The last
           integer CONFIG is the pad setting value like pull-up on this pin. Please
-          refer to i.MX8M Mini Reference Manual for detailed CONFIG settings.
+          refer to i.MX8M Quad/Mini/Nano/Plus  Reference Manual for detailed CONFIG settings.
         $ref: /schemas/types.yaml#/definitions/uint32-matrix
         items:
           items:
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
deleted file mode 100644
index b1cdbb56d4e4..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
+++ /dev/null
@@ -1,84 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mn-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Freescale IMX8MN IOMUX Controller
-
-maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
-
-description:
-  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
-  for common binding part and usage.
-
-properties:
-  compatible:
-    const: fsl,imx8mn-iomuxc
-
-  reg:
-    maxItems: 1
-
-# Client device subnode's properties
-patternProperties:
-  'grp$':
-    type: object
-    description:
-      Pinctrl node's client devices use subnodes for desired pin configuration.
-      Client device subnodes use below standard properties.
-
-    properties:
-      fsl,pins:
-        description:
-          each entry consists of 6 integers and represents the mux and config
-          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
-          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
-          be found in <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last
-          integer CONFIG is the pad setting value like pull-up on this pin. Please
-          refer to i.MX8M Nano Reference Manual for detailed CONFIG settings.
-        $ref: /schemas/types.yaml#/definitions/uint32-matrix
-        items:
-          items:
-            - description: |
-                "mux_reg" indicates the offset of mux register.
-            - description: |
-                "conf_reg" indicates the offset of pad configuration register.
-            - description: |
-                "input_reg" indicates the offset of select input register.
-            - description: |
-                "mux_val" indicates the mux value to be applied.
-            - description: |
-                "input_val" indicates the select input value to be applied.
-            - description: |
-                "pad_setting" indicates the pad configuration value to be applied.
-
-    required:
-      - fsl,pins
-
-    additionalProperties: false
-
-allOf:
-  - $ref: "pinctrl.yaml#"
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-examples:
-  # Pinmux controller node
-  - |
-    iomuxc: pinctrl@30330000 {
-        compatible = "fsl,imx8mn-iomuxc";
-        reg = <0x30330000 0x10000>;
-
-        pinctrl_uart2: uart2grp {
-            fsl,pins =
-                <0x23C 0x4A4 0x4FC 0x0 0x0	0x140>,
-                <0x240 0x4A8 0x000 0x0 0x0	0x140>;
-        };
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
deleted file mode 100644
index 4eed3a4e153a..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
+++ /dev/null
@@ -1,84 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mp-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Freescale IMX8MP IOMUX Controller
-
-maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
-
-description:
-  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
-  for common binding part and usage.
-
-properties:
-  compatible:
-    const: fsl,imx8mp-iomuxc
-
-  reg:
-    maxItems: 1
-
-# Client device subnode's properties
-patternProperties:
-  'grp$':
-    type: object
-    description:
-      Pinctrl node's client devices use subnodes for desired pin configuration.
-      Client device subnodes use below standard properties.
-
-    properties:
-      fsl,pins:
-        description:
-          each entry consists of 6 integers and represents the mux and config
-          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
-          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
-          be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
-          integer CONFIG is the pad setting value like pull-up on this pin. Please
-          refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
-        $ref: /schemas/types.yaml#/definitions/uint32-matrix
-        items:
-          items:
-            - description: |
-                "mux_reg" indicates the offset of mux register.
-            - description: |
-                "conf_reg" indicates the offset of pad configuration register.
-            - description: |
-                "input_reg" indicates the offset of select input register.
-            - description: |
-                "mux_val" indicates the mux value to be applied.
-            - description: |
-                "input_val" indicates the select input value to be applied.
-            - description: |
-                "pad_setting" indicates the pad configuration value to be applied.
-
-    required:
-      - fsl,pins
-
-    additionalProperties: false
-
-allOf:
-  - $ref: "pinctrl.yaml#"
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-examples:
-  # Pinmux controller node
-  - |
-    iomuxc: pinctrl@30330000 {
-        compatible = "fsl,imx8mp-iomuxc";
-        reg = <0x30330000 0x10000>;
-
-        pinctrl_uart2: uart2grp {
-            fsl,pins =
-                <0x228 0x488 0x5F0 0x0 0x6	0x49>,
-                <0x228 0x488 0x000 0x0 0x0	0x49>;
-        };
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
deleted file mode 100644
index d4a8ea5551a5..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
+++ /dev/null
@@ -1,84 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mq-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Freescale IMX8MQ IOMUX Controller
-
-maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
-
-description:
-  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
-  for common binding part and usage.
-
-properties:
-  compatible:
-    const: fsl,imx8mq-iomuxc
-
-  reg:
-    maxItems: 1
-
-# Client device subnode's properties
-patternProperties:
-  'grp$':
-    type: object
-    description:
-      Pinctrl node's client devices use subnodes for desired pin configuration.
-      Client device subnodes use below standard properties.
-
-    properties:
-      fsl,pins:
-        description:
-          each entry consists of 6 integers and represents the mux and config
-          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
-          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
-          be found in <arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h>. The last
-          integer CONFIG is the pad setting value like pull-up on this pin. Please
-          refer to i.MX8M Quad Reference Manual for detailed CONFIG settings.
-        $ref: /schemas/types.yaml#/definitions/uint32-matrix
-        items:
-          items:
-            - description: |
-                "mux_reg" indicates the offset of mux register.
-            - description: |
-                "conf_reg" indicates the offset of pad configuration register.
-            - description: |
-                "input_reg" indicates the offset of select input register.
-            - description: |
-                "mux_val" indicates the mux value to be applied.
-            - description: |
-                "input_val" indicates the select input value to be applied.
-            - description: |
-                "pad_setting" indicates the pad configuration value to be applied.
-
-    required:
-      - fsl,pins
-
-    additionalProperties: false
-
-allOf:
-  - $ref: "pinctrl.yaml#"
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-examples:
-  # Pinmux controller node
-  - |
-    iomuxc: pinctrl@30330000 {
-        compatible = "fsl,imx8mq-iomuxc";
-        reg = <0x30330000 0x10000>;
-
-        pinctrl_uart1: uart1grp {
-            fsl,pins =
-                <0x234 0x49C 0x4F4 0x0 0x0	0x49>,
-                <0x238 0x4A0 0x4F4 0x0 0x0	0x49>;
-        };
-    };
-
-...