[05/16] arm64: dts: broadcom: bcmbca: Add spi controller node

Message ID	20230106200809.330769-6-william.zhang@broadcom.com
State	Superseded
Headers	show Return-Path: <linux-spi-owner@vger.kernel.org> From: William Zhang <william.zhang@broadcom.com> To: Linux SPI List <linux-spi@vger.kernel.org>, Broadcom Kernel List <bcm-kernel-feedback-list@broadcom.com> Cc: anand.gore@broadcom.com, tomer.yacoby@broadcom.com, dan.beygelman@broadcom.com, joel.peshkin@broadcom.com, f.fainelli@gmail.com, jonas.gorski@gmail.com, kursad.oney@broadcom.com, dregan@mail.com, William Zhang <william.zhang@broadcom.com>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, =?utf-8?b?UmFmYcWC?= =?utf-8?b?IE1pxYJlY2tp?= <rafal@milecki.pl>, Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 05/16] arm64: dts: broadcom: bcmbca: Add spi controller node Date: Fri, 6 Jan 2023 12:07:57 -0800 Message-Id: <20230106200809.330769-6-william.zhang@broadcom.com> In-Reply-To: <20230106200809.330769-1-william.zhang@broadcom.com> References: <20230106200809.330769-1-william.zhang@broadcom.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	spi: bcm63xx-hsspi: driver and doc updates \| expand [00/16] spi: bcm63xx-hsspi: driver and doc updates [01/16] dt-bindings: spi: Convert bcm63xx-hsspi bindings to json-schema [02/16] dt-bindings: spi: Add bcmbca-hsspi controller support [03/16] dt-bindings: spi: Add spi peripheral specific property [04/16] ARM: dts: broadcom: bcmbca: Add spi controller node [05/16] arm64: dts: broadcom: bcmbca: Add spi controller node [06/16] spi: bcm63xx-hsspi: Endianness fix for ARM based SoC [07/16] spi: bcm63xx-hsspi: Add polling mode support [08/16] spi: bcm63xx-hsspi: Handle cs_change correctly [09/16] spi: bcm63xx-hsspi: Fix multi-bit mode setting [10/16] spi: bcm63xx-hsspi: Make dummy cs workaround as an option [11/16] spi: bcm63xx-hsspi: Add prepend feature support [12/16] spi: bcm63xx-hsspi: Add clock gate disable option support [13/16] spi: spi-mem: Allow controller supporting mem_ops without exec_op [14/16] spi: bcm63xx-hsspi: prepend: Disable spi mem dual io read op support [15/16] spi: bcmbca-hsspi: Add driver for newer HSSPI controller [16/16] MAINTAINERS: Add entry for Broadcom Broadband SoC HS SPI drivers

diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi index eb2a78f4e033..169045215d91 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi @@ -107,6 +107,12 @@ periph_clk: periph_clk { clock-frequency = <50000000>; clock-output-names = "periph"; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; soc { @@ -531,6 +537,17 @@ leds: leds@800 { #size-cells = <0>; }; + hsspi: spi@1000{ + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6328-hsspi"; + reg = <0x1000 0x600>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + nand-controller@1800 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi index d5bc31980f03..ebacfffc4264 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi @@ -79,6 +79,7 @@ periph_clk: periph-clk { #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -86,6 +87,12 @@ uart_clk: uart-clk { clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -117,6 +124,18 @@ bus@ff800000 { #size-cells = <1>; ranges = <0x0 0x0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcmbca-hsspi"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi index 6f805266d3c9..184f8975d8f2 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi @@ -60,6 +60,7 @@ periph_clk: periph-clk { #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -67,6 +68,12 @@ uart_clk: uart-clk { clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -99,6 +106,17 @@ bus@ff800000 { #size-cells = <1>; ranges = <0x0 0x0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6328-hsspi"; + reg = <0x1000 0x600>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi index b982249b80a2..4036ddc3c833 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi @@ -79,6 +79,7 @@ periph_clk: periph-clk { #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -86,6 +87,12 @@ uart_clk: uart-clk { clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -117,6 +124,17 @@ bus@ff800000 { #size-cells = <1>; ranges = <0x0 0x0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6328-hsspi"; + reg = <0x1000 0x600>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi index a996d436e977..d29738e6fd67 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi @@ -79,6 +79,7 @@ periph_clk: periph-clk { #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -86,6 +87,12 @@ uart_clk: uart-clk { clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -117,6 +124,18 @@ bus@ff800000 { #size-cells = <1>; ranges = <0x0 0x0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcmbca-hsspi"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi index 62c530d4b103..6c5faf175551 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi @@ -60,6 +60,12 @@ periph_clk:periph-clk { #clock-cells = <0>; clock-frequency = <200000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -100,5 +106,16 @@ uart0: serial@640 { clock-names = "refclk"; status = "disabled"; }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6328-hsspi"; + reg = <0x1000 0x600>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi index 34c7b513d363..edc0003457fd 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi @@ -78,6 +78,12 @@ periph_clk:periph-clk { #clock-cells = <0>; clock-frequency = <200000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -137,5 +143,16 @@ uart0: serial@640 { clock-names = "refclk"; status = "disabled"; }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6328-hsspi"; + reg = <0x1000 0x600>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts index fcbd3c430ace..c4e6e71f6310 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts @@ -28,3 +28,7 @@ memory@0 { &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts index a3623e6f6919..e69cd683211a 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts @@ -28,3 +28,7 @@ memory@0 { &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts index e39f1e6d4774..db2c82d6dfd8 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts @@ -28,3 +28,7 @@ memory@0 { &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts index eba07e0b1ca6..25c12bc63545 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts @@ -28,3 +28,7 @@ memory@0 { &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts index af17091ae764..faba21f03120 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts @@ -28,3 +28,7 @@ memory@0 { &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts index 032aeb75c983..9808331eede2 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts @@ -28,3 +28,7 @@ memory@0 { &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts index 0cbf582f5d54..1f561c8e13b0 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts @@ -28,3 +28,7 @@ memory@0 { &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +};

[05/16] arm64: dts: broadcom: bcmbca: Add spi controller node

Commit Message

Patch