diff mbox series

[v3,10/17] media: i2c: imx290: Factor out clock initialization to separate function

Message ID 20230116144454.1012-11-laurent.pinchart@ideasonboard.com
State Accepted
Commit e5d363ca82b94b26d85043c26e865824f947a80b
Headers show
Series media: i2c: imx290: Miscellaneous improvements | expand

Commit Message

Laurent Pinchart Jan. 16, 2023, 2:44 p.m. UTC
Move the external clock initialization code from probe() to a separate
function to improve readability. No functional change intended.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 drivers/media/i2c/imx290.c | 57 +++++++++++++++++++++++---------------
 1 file changed, 35 insertions(+), 22 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index 51f430ca3652..c1d18ec51e41 100644
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -1120,6 +1120,34 @@  static int imx290_get_regulators(struct device *dev, struct imx290 *imx290)
 				       imx290->supplies);
 }
 
+static int imx290_init_clk(struct imx290 *imx290)
+{
+	u32 xclk_freq;
+	int ret;
+
+	ret = fwnode_property_read_u32(dev_fwnode(imx290->dev),
+				       "clock-frequency", &xclk_freq);
+	if (ret) {
+		dev_err(imx290->dev, "Could not get xclk frequency\n");
+		return ret;
+	}
+
+	/* external clock must be 37.125 MHz */
+	if (xclk_freq != 37125000) {
+		dev_err(imx290->dev, "External clock frequency %u is not supported\n",
+			xclk_freq);
+		return -EINVAL;
+	}
+
+	ret = clk_set_rate(imx290->xclk, xclk_freq);
+	if (ret) {
+		dev_err(imx290->dev, "Could not set xclk frequency\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 /*
  * Returns 0 if all link frequencies used by the driver for the given number
  * of MIPI data lanes are mentioned in the device tree, or the value of the
@@ -1204,7 +1232,6 @@  static int imx290_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
 	struct imx290 *imx290;
-	u32 xclk_freq;
 	int ret;
 
 	imx290 = devm_kzalloc(dev, sizeof(*imx290), GFP_KERNEL);
@@ -1222,32 +1249,12 @@  static int imx290_probe(struct i2c_client *client)
 	if (ret)
 		return ret;
 
-	/* get system clock (xclk) */
+	/* Acquire resources. */
 	imx290->xclk = devm_clk_get(dev, "xclk");
 	if (IS_ERR(imx290->xclk))
 		return dev_err_probe(dev, PTR_ERR(imx290->xclk),
 				     "Could not get xclk");
 
-	ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency",
-				       &xclk_freq);
-	if (ret) {
-		dev_err(dev, "Could not get xclk frequency\n");
-		return ret;
-	}
-
-	/* external clock must be 37.125 MHz */
-	if (xclk_freq != 37125000) {
-		dev_err(dev, "External clock frequency %u is not supported\n",
-			xclk_freq);
-		return -EINVAL;
-	}
-
-	ret = clk_set_rate(imx290->xclk, xclk_freq);
-	if (ret) {
-		dev_err(dev, "Could not set xclk frequency\n");
-		return ret;
-	}
-
 	ret = imx290_get_regulators(dev, imx290);
 	if (ret < 0)
 		return dev_err_probe(dev, ret, "Cannot get regulators\n");
@@ -1258,8 +1265,14 @@  static int imx290_probe(struct i2c_client *client)
 		return dev_err_probe(dev, PTR_ERR(imx290->rst_gpio),
 				     "Cannot get reset gpio\n");
 
+	/* Initialize external clock frequency. */
+	ret = imx290_init_clk(imx290);
+	if (ret)
+		return ret;
+
 	mutex_init(&imx290->lock);
 
+	/* Initialize and register subdev. */
 	ret = imx290_subdev_init(imx290);
 	if (ret)
 		goto err_mutex;