diff mbox series

ARM: dts: qcom: ipq8064: move reg-less nodes outside soc node

Message ID 20230117224417.7530-1-ansuelsmth@gmail.com
State Accepted
Commit 6739f57dea1657d410f267c05349b1d2d90771f0
Headers show
Series ARM: dts: qcom: ipq8064: move reg-less nodes outside soc node | expand

Commit Message

Christian Marangi Jan. 17, 2023, 10:44 p.m. UTC 
Move node that doesn't have a reg outside the soc node as it should only
contain reg nodes.
No changes intended.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

Comments

Bjorn Andersson Feb. 9, 2023, 4:22 a.m. UTC | #1 
On Tue, 17 Jan 2023 23:44:17 +0100, Christian Marangi wrote:
> Move node that doesn't have a reg outside the soc node as it should only
> contain reg nodes.
> No changes intended.
> 
> 

Applied, thanks!

[1/1] ARM: dts: qcom: ipq8064: move reg-less nodes outside soc node
      commit: 6739f57dea1657d410f267c05349b1d2d90771f0

Best regards,
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index ae018a7dc6fd..52d77e105957 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -326,26 +326,26 @@  scm {
 		};
 	};
 
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,wr_osr_lmt = <7>;
+		snps,rd_osr_lmt = <7>;
+		snps,blen = <16 0 0 0 0 0 0>;
+	};
+
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 		compatible = "simple-bus";
 
-		stmmac_axi_setup: stmmac-axi-config {
-			snps,wr_osr_lmt = <7>;
-			snps,rd_osr_lmt = <7>;
-			snps,blen = <16 0 0 0 0 0 0>;
-		};
-
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
 		rpm: rpm@108000 {
 			compatible = "qcom,rpm-ipq8064";
 			reg = <0x00108000 0x1000>;