diff mbox series

[3/5] dt-bindings: iio: correct node names in examples

Message ID 20230118184413.395820-3-krzysztof.kozlowski@linaro.org
State Superseded
Headers show
Series [1/5] dt-bindings: iio: drop unneeded quotes | expand

Commit Message

Krzysztof Kozlowski Jan. 18, 2023, 6:44 p.m. UTC
Do not use underscores and unneeded suffixes (e.g. i2c0) in node name in
examples.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/iio/accel/adi,adis16201.yaml      | 2 +-
 .../devicetree/bindings/iio/accel/adi,adis16240.yaml      | 2 +-
 .../devicetree/bindings/iio/accel/adi,adxl313.yaml        | 2 +-
 .../devicetree/bindings/iio/accel/adi,adxl345.yaml        | 4 ++--
 .../devicetree/bindings/iio/accel/bosch,bma220.yaml       | 2 +-
 .../devicetree/bindings/iio/accel/nxp,fxls8962af.yaml     | 4 ++--
 Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml | 2 +-
 Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 2 +-
 Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 2 +-
 .../devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml       | 2 +-
 .../devicetree/bindings/iio/adc/st,stmpe-adc.yaml         | 8 +++-----
 .../devicetree/bindings/iio/frequency/adf4371.yaml        | 2 +-
 .../devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml | 4 ++--
 .../devicetree/bindings/iio/health/ti,afe4403.yaml        | 2 +-
 .../devicetree/bindings/iio/health/ti,afe4404.yaml        | 2 +-
 Documentation/devicetree/bindings/iio/humidity/dht11.yaml | 2 +-
 .../devicetree/bindings/iio/humidity/ti,hdc2010.yaml      | 2 +-
 .../devicetree/bindings/iio/imu/adi,adis16460.yaml        | 2 +-
 .../devicetree/bindings/iio/imu/invensense,icm42600.yaml  | 4 ++--
 .../devicetree/bindings/iio/imu/nxp,fxos8700.yaml         | 4 ++--
 .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml     | 2 +-
 .../devicetree/bindings/iio/pressure/bmp085.yaml          | 2 +-
 .../bindings/iio/temperature/maxim,max31865.yaml          | 2 +-
 23 files changed, 30 insertions(+), 32 deletions(-)

Comments

Jonathan Cameron Jan. 21, 2023, 5:17 p.m. UTC | #1
On Wed, 18 Jan 2023 19:44:11 +0100
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:

> Do not use underscores and unneeded suffixes (e.g. i2c0) in node name in
> examples.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---

> diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
> index 6c5ad426a016..12f75ddc4a70 100644
> --- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
> +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
> @@ -42,7 +42,7 @@ examples:
>          #address-cells = <1>;
>          #size-cells = <0>;
>  
> -        heart_mon@0 {
> +        heart-rate@0 {

These are both heart-rate and pulse oximeters so measure more than just
the rate (oxygen saturation in the blood). Reality is they actually
measure light absorption over time, but you can calculate an estimate
of both rate and oxygen saturation from that.

I don't really mind simplifying that to heart-rate, but wanted to
call this out for possible discussion.


>              compatible = "ti,afe4403";
>              reg = <0>;
>              spi-max-frequency = <10000000>;
> diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
> index c0e815d9999e..b334f3e356ad 100644
> --- a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
> +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
> @@ -39,7 +39,7 @@ examples:
>          #address-cells = <1>;
>          #size-cells = <0>;
>  
> -        heart_mon@58 {
> +        heart-rate@58 {
>              compatible = "ti,afe4404";
>              reg = <0x58>;
>              tx-supply = <&vbat>;

The rest are all fine.  If no one comments I'll pick this up as it is in a few
days.

Jonathan
Krzysztof Kozlowski Jan. 21, 2023, 6:31 p.m. UTC | #2
On 21/01/2023 18:17, Jonathan Cameron wrote:
> On Wed, 18 Jan 2023 19:44:11 +0100
> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> 
>> Do not use underscores and unneeded suffixes (e.g. i2c0) in node name in
>> examples.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
> 
>> diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
>> index 6c5ad426a016..12f75ddc4a70 100644
>> --- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
>> +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
>> @@ -42,7 +42,7 @@ examples:
>>          #address-cells = <1>;
>>          #size-cells = <0>;
>>  
>> -        heart_mon@0 {
>> +        heart-rate@0 {
> 
> These are both heart-rate and pulse oximeters so measure more than just
> the rate (oxygen saturation in the blood). Reality is they actually
> measure light absorption over time, but you can calculate an estimate
> of both rate and oxygen saturation from that.
> 
> I don't really mind simplifying that to heart-rate, but wanted to
> call this out for possible discussion.

They could be heart-mon. The fix is mostly around the underscore. I
don't have any arguments for changing it to heart-rate, thus we can go
with whatever you prefer.

Best regards,
Krzysztof
Jonathan Cameron Jan. 22, 2023, 5:01 p.m. UTC | #3
On Sat, 21 Jan 2023 19:31:23 +0100
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:

> On 21/01/2023 18:17, Jonathan Cameron wrote:
> > On Wed, 18 Jan 2023 19:44:11 +0100
> > Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> >   
> >> Do not use underscores and unneeded suffixes (e.g. i2c0) in node name in
> >> examples.
> >>
> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> >> ---  
> >   
> >> diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
> >> index 6c5ad426a016..12f75ddc4a70 100644
> >> --- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
> >> +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
> >> @@ -42,7 +42,7 @@ examples:
> >>          #address-cells = <1>;
> >>          #size-cells = <0>;
> >>  
> >> -        heart_mon@0 {
> >> +        heart-rate@0 {  
> > 
> > These are both heart-rate and pulse oximeters so measure more than just
> > the rate (oxygen saturation in the blood). Reality is they actually
> > measure light absorption over time, but you can calculate an estimate
> > of both rate and oxygen saturation from that.
> > 
> > I don't really mind simplifying that to heart-rate, but wanted to
> > call this out for possible discussion.  
> 
> They could be heart-mon. The fix is mostly around the underscore. I
> don't have any arguments for changing it to heart-rate, thus we can go
> with whatever you prefer.
I'm fine with either and as we have a patch with heart-rate that wins
currently. I'll just let this sit for a little longer than
normal to see if we get any other responses!

Thanks,

Jonathan
> 
> Best regards,
> Krzysztof
>
Rob Herring (Arm) Jan. 23, 2023, 8:33 p.m. UTC | #4
On Sun, Jan 22, 2023 at 05:01:05PM +0000, Jonathan Cameron wrote:
> On Sat, 21 Jan 2023 19:31:23 +0100
> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> 
> > On 21/01/2023 18:17, Jonathan Cameron wrote:
> > > On Wed, 18 Jan 2023 19:44:11 +0100
> > > Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> > >   
> > >> Do not use underscores and unneeded suffixes (e.g. i2c0) in node name in
> > >> examples.
> > >>
> > >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > >> ---  
> > >   
> > >> diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
> > >> index 6c5ad426a016..12f75ddc4a70 100644
> > >> --- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
> > >> +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
> > >> @@ -42,7 +42,7 @@ examples:
> > >>          #address-cells = <1>;
> > >>          #size-cells = <0>;
> > >>  
> > >> -        heart_mon@0 {
> > >> +        heart-rate@0 {  
> > > 
> > > These are both heart-rate and pulse oximeters so measure more than just
> > > the rate (oxygen saturation in the blood). Reality is they actually
> > > measure light absorption over time, but you can calculate an estimate
> > > of both rate and oxygen saturation from that.
> > > 
> > > I don't really mind simplifying that to heart-rate, but wanted to
> > > call this out for possible discussion.  
> > 
> > They could be heart-mon. The fix is mostly around the underscore. I
> > don't have any arguments for changing it to heart-rate, thus we can go
> > with whatever you prefer.
> I'm fine with either and as we have a patch with heart-rate that wins
> currently. I'll just let this sit for a little longer than
> normal to see if we get any other responses!

I don't care all that much until we've documented something. Otherwise, 
we may be just changing things twice. We have the list in the spec, but 
really I'd like that in schema form. We'd also need to figure out how to 
use that. There's always going to be odd things which we don't have any 
defined name.

For now, I'd just do 's/_/-/'.

Rob
Rob Herring (Arm) Jan. 23, 2023, 8:36 p.m. UTC | #5
On Wed, 18 Jan 2023 19:44:11 +0100, Krzysztof Kozlowski wrote:
> Do not use underscores and unneeded suffixes (e.g. i2c0) in node name in
> examples.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../devicetree/bindings/iio/accel/adi,adis16201.yaml      | 2 +-
>  .../devicetree/bindings/iio/accel/adi,adis16240.yaml      | 2 +-
>  .../devicetree/bindings/iio/accel/adi,adxl313.yaml        | 2 +-
>  .../devicetree/bindings/iio/accel/adi,adxl345.yaml        | 4 ++--
>  .../devicetree/bindings/iio/accel/bosch,bma220.yaml       | 2 +-
>  .../devicetree/bindings/iio/accel/nxp,fxls8962af.yaml     | 4 ++--
>  Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml | 2 +-
>  Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 2 +-
>  Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 2 +-
>  .../devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml       | 2 +-
>  .../devicetree/bindings/iio/adc/st,stmpe-adc.yaml         | 8 +++-----
>  .../devicetree/bindings/iio/frequency/adf4371.yaml        | 2 +-
>  .../devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml | 4 ++--
>  .../devicetree/bindings/iio/health/ti,afe4403.yaml        | 2 +-
>  .../devicetree/bindings/iio/health/ti,afe4404.yaml        | 2 +-
>  Documentation/devicetree/bindings/iio/humidity/dht11.yaml | 2 +-
>  .../devicetree/bindings/iio/humidity/ti,hdc2010.yaml      | 2 +-
>  .../devicetree/bindings/iio/imu/adi,adis16460.yaml        | 2 +-
>  .../devicetree/bindings/iio/imu/invensense,icm42600.yaml  | 4 ++--
>  .../devicetree/bindings/iio/imu/nxp,fxos8700.yaml         | 4 ++--
>  .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml     | 2 +-
>  .../devicetree/bindings/iio/pressure/bmp085.yaml          | 2 +-
>  .../bindings/iio/temperature/maxim,max31865.yaml          | 2 +-
>  23 files changed, 30 insertions(+), 32 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
Krzysztof Kozlowski Jan. 24, 2023, 7:40 a.m. UTC | #6
On 23/01/2023 21:33, Rob Herring wrote:
until we've documented something. Otherwise,
> we may be just changing things twice. We have the list in the spec, but 
> really I'd like that in schema form. We'd also need to figure out how to 
> use that. There's always going to be odd things which we don't have any 
> defined name.
> 
> For now, I'd just do 's/_/-/'.

I'll send a v2 with fixes.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
index 7332442e5661..b6ba7ad1a8d5 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
@@ -41,7 +41,7 @@  unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
index f6f97164c2ca..5887021cc90f 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
@@ -39,7 +39,7 @@  examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
index 185b68ffb536..0c5b64cae965 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
@@ -59,7 +59,7 @@  examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index 346abfb13a3a..07cacc3f6a97 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -49,7 +49,7 @@  examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -64,7 +64,7 @@  examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
index 5dd06f5905b4..ec643de031a3 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
@@ -36,7 +36,7 @@  unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
index 65ce8ea14b52..783c7ddfcd90 100644
--- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
@@ -50,7 +50,7 @@  unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -65,7 +65,7 @@  examples:
     };
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index cc347dade4ef..1d965124c488 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -99,7 +99,7 @@  unevaluatedProperties: false
 
 examples:
   - |
-    spi0 {
+    spi {
       #address-cells = <1>;
       #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index ac5a47c8f070..b05652dfd4a2 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -112,7 +112,7 @@  examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
index a67ba67dab51..5fcc8dd012f1 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@@ -72,7 +72,7 @@  additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
index 18aaf6df179d..73def67fbe01 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
@@ -50,7 +50,7 @@  additionalProperties: false
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    spmi_bus {
+    spmi {
         #address-cells = <1>;
         #size-cells = <0>;
         pmic_iadc: adc@3600 {
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
index 333744a2159c..474e35c49348 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
@@ -35,10 +35,8 @@  additionalProperties: false
 
 examples:
   - |
-    stmpe {
-        stmpe_adc {
-            compatible = "st,stmpe-adc";
-            st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
-        };
+    adc {
+        compatible = "st,stmpe-adc";
+        st,norequest-mask = <0x0f>; /* dont use ADC CH3-0 */
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
index 0144f74a4768..a0a5e5919987 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
@@ -53,7 +53,7 @@  unevaluatedProperties: false
 
 examples:
   - |
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
index 2c900e9dddc6..052dccbb5eea 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
@@ -65,7 +65,7 @@  examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -81,7 +81,7 @@  examples:
           interrupt-names = "INT1";
         };
     };
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
index 6c5ad426a016..12f75ddc4a70 100644
--- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
@@ -42,7 +42,7 @@  examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        heart_mon@0 {
+        heart-rate@0 {
             compatible = "ti,afe4403";
             reg = <0>;
             spi-max-frequency = <10000000>;
diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
index c0e815d9999e..b334f3e356ad 100644
--- a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
@@ -39,7 +39,7 @@  examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        heart_mon@58 {
+        heart-rate@58 {
             compatible = "ti,afe4404";
             reg = <0x58>;
             tx-supply = <&vbat>;
diff --git a/Documentation/devicetree/bindings/iio/humidity/dht11.yaml b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
index 2247481d0203..0103f4238942 100644
--- a/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
@@ -34,7 +34,7 @@  additionalProperties: false
 
 examples:
   - |
-    humidity_sensor {
+    humidity-sensor {
         compatible = "dht11";
         gpios = <&gpio0 6 0>;
     };
diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
index 88384b69f917..a36173b0c654 100644
--- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
@@ -35,7 +35,7 @@  additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
index d166dbca18c3..4e43c80e5119 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
@@ -42,7 +42,7 @@  examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index 13c9abdd3131..3ecfb3f086bc 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -65,7 +65,7 @@  examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -81,7 +81,7 @@  examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
index 24416b59b782..db6a145840f7 100644
--- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
@@ -49,7 +49,7 @@  examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -65,7 +65,7 @@  examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
index 1f9fe15b4b3c..9fb8d773efa3 100644
--- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -39,7 +39,7 @@  examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index 72cd2c2d3f17..256f537840e4 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -60,7 +60,7 @@  examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
       pressure@77 {
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
index a2823ed6867b..66394e17fcc8 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
@@ -43,7 +43,7 @@  examples:
        #address-cells = <1>;
        #size-cells = <0>;
 
-       temp_sensor@0 {
+       temperature-sensor@0 {
          compatible = "maxim,max31865";
          reg = <0>;
          spi-max-frequency = <400000>;