diff mbox series

[v9,03/27] gunyah: Common types and error codes for Gunyah hypercalls

Message ID 20230120224627.4053418-4-quic_eberman@quicinc.com
State New
Headers show
Series Drivers for gunyah hypervisor | expand

Commit Message

Elliot Berman Jan. 20, 2023, 10:46 p.m. UTC
Add architecture-independent standard error codes, types, and macros for
Gunyah hypercalls.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
---
 MAINTAINERS            |  1 +
 include/linux/gunyah.h | 74 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 75 insertions(+)
 create mode 100644 include/linux/gunyah.h

Comments

Greg KH Jan. 30, 2023, 9:58 a.m. UTC | #1
On Fri, Jan 20, 2023 at 02:46:02PM -0800, Elliot Berman wrote:
> Add architecture-independent standard error codes, types, and macros for
> Gunyah hypercalls.
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
> ---
>  MAINTAINERS            |  1 +
>  include/linux/gunyah.h | 74 ++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 75 insertions(+)
>  create mode 100644 include/linux/gunyah.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d9205cb9e988..f1e07e39b2f5 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9048,6 +9048,7 @@ L:	linux-arm-msm@vger.kernel.org
>  S:	Supported
>  F:	Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml
>  F:	Documentation/virt/gunyah/
> +F:	include/linux/gunyah.h
>  
>  HABANALABS PCI DRIVER
>  M:	Oded Gabbay <ogabbay@kernel.org>
> diff --git a/include/linux/gunyah.h b/include/linux/gunyah.h
> new file mode 100644
> index 000000000000..985c6086348e
> --- /dev/null
> +++ b/include/linux/gunyah.h
> @@ -0,0 +1,74 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#ifndef _LINUX_GUNYAH_H
> +#define _LINUX_GUNYAH_H
> +
> +#include <linux/errno.h>
> +#include <linux/limits.h>
> +
> +/* Common Gunyah macros */

Macros?

> +#define GH_CAPID_INVAL	U64_MAX
> +#define GH_VMID_ROOT_VM	0xff

These are all simple defines :)

> +
> +#define GH_ERROR_OK			0
> +
> +#define GH_ERROR_UNIMPLEMENTED		-1
> +#define GH_ERROR_RETRY			-2

All of these values, they come from the hypervisor?

And then you:

> +static inline int gh_remap_error(int gh_error)
> +{
> +	switch (gh_error) {
> +	case GH_ERROR_OK:
> +		return 0;
> +	case GH_ERROR_NOMEM:
> +		return -ENOMEM;
> +	case GH_ERROR_DENIED:
> +	case GH_ERROR_CSPACE_CAP_NULL:
> +	case GH_ERROR_CSPACE_CAP_REVOKED:
> +	case GH_ERROR_CSPACE_WRONG_OBJ_TYPE:
> +	case GH_ERROR_CSPACE_INSUF_RIGHTS:
> +	case GH_ERROR_CSPACE_FULL:
> +		return -EACCES;
> +	case GH_ERROR_BUSY:
> +	case GH_ERROR_IDLE:
> +		return -EBUSY;
> +	case GH_ERROR_IRQ_BOUND:
> +	case GH_ERROR_IRQ_UNBOUND:
> +	case GH_ERROR_MSGQUEUE_FULL:
> +	case GH_ERROR_MSGQUEUE_EMPTY:
> +		return -EPERM;
> +	default:
> +		return -EINVAL;
> +	}
> +}

Convert it to a Linux-kernel related value?

If so, please say that in the documentation here (where the value came
from, etc...)

Also, why isn't gh_error an enumerated type so you can have some type
safety and it's obvious when a value comes from the hypervisor what it
should be and should not be.

thanks,

greg k-h
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index d9205cb9e988..f1e07e39b2f5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9048,6 +9048,7 @@  L:	linux-arm-msm@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml
 F:	Documentation/virt/gunyah/
+F:	include/linux/gunyah.h
 
 HABANALABS PCI DRIVER
 M:	Oded Gabbay <ogabbay@kernel.org>
diff --git a/include/linux/gunyah.h b/include/linux/gunyah.h
new file mode 100644
index 000000000000..985c6086348e
--- /dev/null
+++ b/include/linux/gunyah.h
@@ -0,0 +1,74 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _LINUX_GUNYAH_H
+#define _LINUX_GUNYAH_H
+
+#include <linux/errno.h>
+#include <linux/limits.h>
+
+/* Common Gunyah macros */
+#define GH_CAPID_INVAL	U64_MAX
+#define GH_VMID_ROOT_VM	0xff
+
+#define GH_ERROR_OK			0
+
+#define GH_ERROR_UNIMPLEMENTED		-1
+#define GH_ERROR_RETRY			-2
+
+#define GH_ERROR_ARG_INVAL		1
+#define GH_ERROR_ARG_SIZE		2
+#define GH_ERROR_ARG_ALIGN		3
+
+#define GH_ERROR_NOMEM			10
+
+#define GH_ERROR_ADDR_OVFL		20
+#define GH_ERROR_ADDR_UNFL		21
+#define GH_ERROR_ADDR_INVAL		22
+
+#define GH_ERROR_DENIED			30
+#define GH_ERROR_BUSY			31
+#define GH_ERROR_IDLE			32
+
+#define GH_ERROR_IRQ_BOUND		40
+#define GH_ERROR_IRQ_UNBOUND		41
+
+#define GH_ERROR_CSPACE_CAP_NULL	50
+#define GH_ERROR_CSPACE_CAP_REVOKED	51
+#define GH_ERROR_CSPACE_WRONG_OBJ_TYPE	52
+#define GH_ERROR_CSPACE_INSUF_RIGHTS	53
+#define GH_ERROR_CSPACE_FULL		54
+
+#define GH_ERROR_MSGQUEUE_EMPTY		60
+#define GH_ERROR_MSGQUEUE_FULL		61
+
+static inline int gh_remap_error(int gh_error)
+{
+	switch (gh_error) {
+	case GH_ERROR_OK:
+		return 0;
+	case GH_ERROR_NOMEM:
+		return -ENOMEM;
+	case GH_ERROR_DENIED:
+	case GH_ERROR_CSPACE_CAP_NULL:
+	case GH_ERROR_CSPACE_CAP_REVOKED:
+	case GH_ERROR_CSPACE_WRONG_OBJ_TYPE:
+	case GH_ERROR_CSPACE_INSUF_RIGHTS:
+	case GH_ERROR_CSPACE_FULL:
+		return -EACCES;
+	case GH_ERROR_BUSY:
+	case GH_ERROR_IDLE:
+		return -EBUSY;
+	case GH_ERROR_IRQ_BOUND:
+	case GH_ERROR_IRQ_UNBOUND:
+	case GH_ERROR_MSGQUEUE_FULL:
+	case GH_ERROR_MSGQUEUE_EMPTY:
+		return -EPERM;
+	default:
+		return -EINVAL;
+	}
+}
+
+#endif