[v2,03/14] ARM: dts: broadcom: bcmbca: Add spi controller node

Message ID	20230124221218.341511-4-william.zhang@broadcom.com
State	Superseded
Headers	show Return-Path: <linux-spi-owner@vger.kernel.org> From: William Zhang <william.zhang@broadcom.com> To: Linux SPI List <linux-spi@vger.kernel.org>, Broadcom Kernel List <bcm-kernel-feedback-list@broadcom.com> Cc: tomer.yacoby@broadcom.com, kursad.oney@broadcom.com, dregan@mail.com, f.fainelli@gmail.com, anand.gore@broadcom.com, jonas.gorski@gmail.com, dan.beygelman@broadcom.com, joel.peshkin@broadcom.com, William Zhang <william.zhang@broadcom.com>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, =?utf-8?b?UmFmYcWC?= =?utf-8?b?IE1pxYJlY2tp?= <rafal@milecki.pl>, Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 03/14] ARM: dts: broadcom: bcmbca: Add spi controller node Date: Tue, 24 Jan 2023 14:12:06 -0800 Message-Id: <20230124221218.341511-4-william.zhang@broadcom.com> In-Reply-To: <20230124221218.341511-1-william.zhang@broadcom.com> References: <20230124221218.341511-1-william.zhang@broadcom.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	spi: bcm63xx-hsspi: driver and doc updates \| expand [v2,00/14] spi: bcm63xx-hsspi: driver and doc updates [v2,01/14] dt-bindings: spi: Convert bcm63xx-hsspi bindings to json-schema [v2,02/14] dt-bindings: spi: Add bcmbca-hsspi controller support [v2,03/14] ARM: dts: broadcom: bcmbca: Add spi controller node [v2,04/14] arm64: dts: broadcom: bcmbca: Add spi controller node [v2,05/14] spi: bcm63xx-hsspi: Add new compatible string support [v2,06/14] spi: bcm63xx-hsspi: Endianness fix for ARM based SoC [v2,07/14] spi: bcm63xx-hsspi: Add polling mode support [v2,08/14] spi: bcm63xx-hsspi: Handle cs_change correctly [v2,09/14] spi: bcm63xx-hsspi: Fix multi-bit mode setting [v2,10/14] spi: bcm63xx-hsspi: Add prepend mode support [v2,11/14] spi: spi-mem: Allow controller supporting mem_ops without exec_op [v2,12/14] spi: bcm63xx-hsspi: Disable spi mem dual io [v2,13/14] spi: bcmbca-hsspi: Add driver for newer HSSPI controller [v2,14/14] MAINTAINERS: Add entry for Broadcom Broadband SoC HS SPI drivers

diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi index f4b2db9bc4ab..6de4a2287c90 100644 --- a/arch/arm/boot/dts/bcm47622.dtsi +++ b/arch/arm/boot/dts/bcm47622.dtsi @@ -88,6 +88,12 @@ uart_clk: uart-clk { clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -119,6 +125,19 @@ bus@ff800000 { #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0", + "brcm,bcmbca-hsspi"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index b774a8d63813..2c436b95f874 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -66,6 +66,12 @@ apb_clk: apb_clk { clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; /* ARM bus */ @@ -203,6 +209,19 @@ serial1: serial@620 { status = "disabled"; }; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0", + "brcm,bcmbca-hsspi"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + nand_controller: nand-controller@2000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm63148.dtsi b/arch/arm/boot/dts/bcm63148.dtsi index 7cd55d64de71..646906c8c260 100644 --- a/arch/arm/boot/dts/bcm63148.dtsi +++ b/arch/arm/boot/dts/bcm63148.dtsi @@ -60,6 +60,12 @@ periph_clk: periph-clk { #clock-cells = <0>; clock-frequency = <50000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -100,5 +106,18 @@ uart0: serial@600 { clock-names = "refclk"; status = "disabled"; }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0", + "brcm,bcmbca-hsspi"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi index 043e699cbc27..15f550dadc60 100644 --- a/arch/arm/boot/dts/bcm63178.dtsi +++ b/arch/arm/boot/dts/bcm63178.dtsi @@ -71,6 +71,7 @@ periph_clk: periph-clk { #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -78,6 +79,12 @@ uart_clk: uart-clk { clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -109,6 +116,19 @@ bus@ff800000 { #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0", + "brcm,bcmbca-hsspi"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm6756.dtsi b/arch/arm/boot/dts/bcm6756.dtsi index 5c72219bc194..45c09a54ac20 100644 --- a/arch/arm/boot/dts/bcm6756.dtsi +++ b/arch/arm/boot/dts/bcm6756.dtsi @@ -88,6 +88,12 @@ uart_clk: uart-clk { clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -119,6 +125,20 @@ bus@ff800000 { #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1", + "brcm,bcmbca-hsspi"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi index 81513a793815..e8895d69e249 100644 --- a/arch/arm/boot/dts/bcm6846.dtsi +++ b/arch/arm/boot/dts/bcm6846.dtsi @@ -61,6 +61,12 @@ periph_clk: periph-clk { #clock-cells = <0>; clock-frequency = <200000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -100,5 +106,18 @@ uart0: serial@640 { clock-names = "refclk"; status = "disabled"; }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0", + "brcm,bcmbca-hsspi"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/bcm6855.dtsi b/arch/arm/boot/dts/bcm6855.dtsi index 5fa5feac0e29..6ecfe7ac0554 100644 --- a/arch/arm/boot/dts/bcm6855.dtsi +++ b/arch/arm/boot/dts/bcm6855.dtsi @@ -78,6 +78,12 @@ uart_clk: uart-clk { clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -109,6 +115,20 @@ bus@ff800000 { #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1", + "brcm,bcmbca-hsspi"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi index 4ec836ac4baf..636a6ae416b3 100644 --- a/arch/arm/boot/dts/bcm6878.dtsi +++ b/arch/arm/boot/dts/bcm6878.dtsi @@ -61,6 +61,7 @@ periph_clk: periph-clk { #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -68,6 +69,12 @@ uart_clk: uart-clk { clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -100,6 +107,19 @@ bus@ff800000 { #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0", + "brcm,bcmbca-hsspi"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm947622.dts b/arch/arm/boot/dts/bcm947622.dts index 6f083724ab8e..93b8ce22678d 100644 --- a/arch/arm/boot/dts/bcm947622.dts +++ b/arch/arm/boot/dts/bcm947622.dts @@ -28,3 +28,7 @@ memory@0 { &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963138.dts b/arch/arm/boot/dts/bcm963138.dts index d28c4f130ca2..1b405c249213 100644 --- a/arch/arm/boot/dts/bcm963138.dts +++ b/arch/arm/boot/dts/bcm963138.dts @@ -25,3 +25,7 @@ memory@0 { &serial0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts index 15bec75be74c..b5af61853a07 100644 --- a/arch/arm/boot/dts/bcm963138dvt.dts +++ b/arch/arm/boot/dts/bcm963138dvt.dts @@ -50,3 +50,7 @@ &ahci { &sata_phy { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963148.dts b/arch/arm/boot/dts/bcm963148.dts index 98f6a6d09f50..1f5d6d783f09 100644 --- a/arch/arm/boot/dts/bcm963148.dts +++ b/arch/arm/boot/dts/bcm963148.dts @@ -28,3 +28,7 @@ memory@0 { &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963178.dts b/arch/arm/boot/dts/bcm963178.dts index fa096e9cde23..d036e99dd8d1 100644 --- a/arch/arm/boot/dts/bcm963178.dts +++ b/arch/arm/boot/dts/bcm963178.dts @@ -28,3 +28,7 @@ memory@0 { &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96756.dts b/arch/arm/boot/dts/bcm96756.dts index 9a4a87ba9c8a..8b104f3fb14a 100644 --- a/arch/arm/boot/dts/bcm96756.dts +++ b/arch/arm/boot/dts/bcm96756.dts @@ -28,3 +28,7 @@ memory@0 { &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96846.dts b/arch/arm/boot/dts/bcm96846.dts index c70ebccabc19..55852c229608 100644 --- a/arch/arm/boot/dts/bcm96846.dts +++ b/arch/arm/boot/dts/bcm96846.dts @@ -28,3 +28,7 @@ memory@0 { &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96855.dts b/arch/arm/boot/dts/bcm96855.dts index 4438152561ac..2ad880af2104 100644 --- a/arch/arm/boot/dts/bcm96855.dts +++ b/arch/arm/boot/dts/bcm96855.dts @@ -28,3 +28,7 @@ memory@0 { &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96878.dts b/arch/arm/boot/dts/bcm96878.dts index 8fbc175cb452..b7af8ade7a9d 100644 --- a/arch/arm/boot/dts/bcm96878.dts +++ b/arch/arm/boot/dts/bcm96878.dts @@ -28,3 +28,7 @@ memory@0 { &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +};

[v2,03/14] ARM: dts: broadcom: bcmbca: Add spi controller node

Commit Message

Comments

Patch