diff mbox series

[v2,02/14] dt-bindings: spi: Add bcmbca-hsspi controller support

Message ID 20230124221218.341511-3-william.zhang@broadcom.com
State New
Headers show
Series spi: bcm63xx-hsspi: driver and doc updates | expand

Commit Message

William Zhang Jan. 24, 2023, 10:12 p.m. UTC
The new Broadcom Broadband BCMBCA SoCs includes a updated HSSPI
controller. Add new compatible strings to differentiate the old and new
controller while keeping MIPS based chip with the old compatible. Update
property requirements for these two revisions of the controller.  Also
add myself and Kursad as the maintainers.

Signed-off-by: William Zhang <william.zhang@broadcom.com>

---

Changes in v2:
- Update new compatible string to follow Broadcom convention <chip
specific compatible>, <version of the IP>, <fallback>
- Add reg-names min/maxItem constraints to be consistent with reg
property
- Make interrupts required property
- Remove double quote from spi-controller.yaml reference
- Remove brcm,use-cs-workaround flag
- Update the example with new compatile and interrupts property
- Update commit message

 .../bindings/spi/brcm,bcm63xx-hsspi.yaml      | 106 +++++++++++++++++-
 1 file changed, 101 insertions(+), 5 deletions(-)

Comments

Rob Herring Jan. 26, 2023, 1:56 p.m. UTC | #1
On Wed, Jan 25, 2023 at 3:41 PM William Zhang
<william.zhang@broadcom.com> wrote:
> On 01/25/2023 12:51 PM, Rob Herring wrote:
> > On Wed, Jan 25, 2023 at 11:23:52AM -0800, William Zhang wrote:
> >> On 01/24/2023 11:35 PM, Krzysztof Kozlowski wrote:
> >>> On 24/01/2023 23:12, William Zhang wrote:
> >>>> The new Broadcom Broadband BCMBCA SoCs includes a updated HSSPI
> >>>> controller. Add new compatible strings to differentiate the old and new
> >>>> controller while keeping MIPS based chip with the old compatible. Update
> >>>> property requirements for these two revisions of the controller.  Also
> >>>> add myself and Kursad as the maintainers.

[...]

> >>>>    properties:
> >>>>      compatible:
> >>>> -    const: brcm,bcm6328-hsspi
> >>>> +    oneOf:
> >>>> +      - const: brcm,bcm6328-hsspi
> >>>> +      - items:
> >>>> +          - enum:
> >>>> +              - brcm,bcm47622-hsspi
> >>>> +              - brcm,bcm4908-hsspi
> >>>> +              - brcm,bcm63138-hsspi
> >>>> +              - brcm,bcm63146-hsspi
> >>>> +              - brcm,bcm63148-hsspi
> >>>> +              - brcm,bcm63158-hsspi
> >>>> +              - brcm,bcm63178-hsspi
> >>>> +              - brcm,bcm6846-hsspi
> >>>> +              - brcm,bcm6856-hsspi
> >>>> +              - brcm,bcm6858-hsspi
> >>>> +              - brcm,bcm6878-hsspi
> >>>> +          - const: brcm,bcmbca-hsspi-v1.0
> >>>> +          - const: brcm,bcmbca-hsspi
> >>>
> >>> Why do you need "brcm,bcmbca-hsspi"? Nothing binds to it, so it's
> >>> useless and very generic.
> >>>
> >> This was from Florian's suggestion and Broadcom's convention. See [1] and
> >> you are okay with that [2].  I added the rev compatible and you were not
> >> objecting it finally if I understand you correctly.
> >
> > Can you have a driver that only understands what 'brcm,bcmbca-hsspi' is
> > work on all h/w that includes the compatible string? It doesn't seem
> > like it since v1.1 is a completely new driver. Therefore
> > 'brcm,bcmbca-hsspi' is pretty much useless.
> >
> 'brcm,bcmbca-hsspi' should be added to the binding table of
> spi-bcm63xx-hsspi.c driver.   This is the initial driver that works for
> v1.0 controller.  For v1.1 controller, yes it can fallback and work with
> 1.0 driver spi-bcm63xx-hsspi.c simply not using the new feature in
> v1.1(chip select signal control through software) and keeping using the
> prepend mode or dummy cs workaround supported in 1.0 driver.

If v1.1 is compatible with v1.0, then say that:

soc-compat, "brcm,bcmbca-hsspi-v1.1", "brcm,bcmbca-hsspi-v1.0"

IOW, 'brcm,bcmbca-hsspi' is redundant with 'brcm,bcmbca-hsspi-v1.0'.
They have the same meaning. So pick which one you want to use. Not
both.

Also, if that is the case, you shouldn't be introducing a whole new
driver for v1.1.

Rob
William Zhang Jan. 26, 2023, 8:04 p.m. UTC | #2
On 01/26/2023 05:56 AM, Rob Herring wrote:
> On Wed, Jan 25, 2023 at 3:41 PM William Zhang
> <william.zhang@broadcom.com> wrote:
>> On 01/25/2023 12:51 PM, Rob Herring wrote:
>>> On Wed, Jan 25, 2023 at 11:23:52AM -0800, William Zhang wrote:
>>>> On 01/24/2023 11:35 PM, Krzysztof Kozlowski wrote:
>>>>> On 24/01/2023 23:12, William Zhang wrote:
>>>>>> The new Broadcom Broadband BCMBCA SoCs includes a updated HSSPI
>>>>>> controller. Add new compatible strings to differentiate the old and new
>>>>>> controller while keeping MIPS based chip with the old compatible. Update
>>>>>> property requirements for these two revisions of the controller.  Also
>>>>>> add myself and Kursad as the maintainers.
> 
> [...]
> 
>>>>>>     properties:
>>>>>>       compatible:
>>>>>> -    const: brcm,bcm6328-hsspi
>>>>>> +    oneOf:
>>>>>> +      - const: brcm,bcm6328-hsspi
>>>>>> +      - items:
>>>>>> +          - enum:
>>>>>> +              - brcm,bcm47622-hsspi
>>>>>> +              - brcm,bcm4908-hsspi
>>>>>> +              - brcm,bcm63138-hsspi
>>>>>> +              - brcm,bcm63146-hsspi
>>>>>> +              - brcm,bcm63148-hsspi
>>>>>> +              - brcm,bcm63158-hsspi
>>>>>> +              - brcm,bcm63178-hsspi
>>>>>> +              - brcm,bcm6846-hsspi
>>>>>> +              - brcm,bcm6856-hsspi
>>>>>> +              - brcm,bcm6858-hsspi
>>>>>> +              - brcm,bcm6878-hsspi
>>>>>> +          - const: brcm,bcmbca-hsspi-v1.0
>>>>>> +          - const: brcm,bcmbca-hsspi
>>>>>
>>>>> Why do you need "brcm,bcmbca-hsspi"? Nothing binds to it, so it's
>>>>> useless and very generic.
>>>>>
>>>> This was from Florian's suggestion and Broadcom's convention. See [1] and
>>>> you are okay with that [2].  I added the rev compatible and you were not
>>>> objecting it finally if I understand you correctly.
>>>
>>> Can you have a driver that only understands what 'brcm,bcmbca-hsspi' is
>>> work on all h/w that includes the compatible string? It doesn't seem
>>> like it since v1.1 is a completely new driver. Therefore
>>> 'brcm,bcmbca-hsspi' is pretty much useless.
>>>
>> 'brcm,bcmbca-hsspi' should be added to the binding table of
>> spi-bcm63xx-hsspi.c driver.   This is the initial driver that works for
>> v1.0 controller.  For v1.1 controller, yes it can fallback and work with
>> 1.0 driver spi-bcm63xx-hsspi.c simply not using the new feature in
>> v1.1(chip select signal control through software) and keeping using the
>> prepend mode or dummy cs workaround supported in 1.0 driver.
> 
> If v1.1 is compatible with v1.0, then say that:
> 
> soc-compat, "brcm,bcmbca-hsspi-v1.1", "brcm,bcmbca-hsspi-v1.0"
> 
> IOW, 'brcm,bcmbca-hsspi' is redundant with 'brcm,bcmbca-hsspi-v1.0'.
> They have the same meaning. So pick which one you want to use. Not
> both.
> 
Agree brcm,bcmbca-hsspi fallback is redundant to brcm,bcmbca-hsspi-v1.0. 
I added it to conform Broadcom convention.  But I understand your and 
Krzystof's concern so I'll drop the brcm,bcmbca-hsspi in v3 to get 
things going.

> Also, if that is the case, you shouldn't be introducing a whole new
> driver for v1.1.
> 
Technically I can combine the new feature to the existing driver v1.0 
but I prefer to start the a new driver so it will be much cleaner and 
simpler to follow without all the workarounds and complex logic.

> Rob
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm63xx-hsspi.yaml b/Documentation/devicetree/bindings/spi/brcm,bcm63xx-hsspi.yaml
index d1a0c9adee7a..d39604654c9e 100644
--- a/Documentation/devicetree/bindings/spi/brcm,bcm63xx-hsspi.yaml
+++ b/Documentation/devicetree/bindings/spi/brcm,bcm63xx-hsspi.yaml
@@ -4,20 +4,73 @@ 
 $id: http://devicetree.org/schemas/spi/brcm,bcm63xx-hsspi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM6328 High Speed SPI controller
+title: Broadcom Broadband SoC High Speed SPI controller
 
 maintainers:
+
+  - William Zhang <william.zhang@broadcom.com>
+  - Kursad Oney <kursad.oney@broadcom.com>
   - Jonas Gorski <jonas.gorski@gmail.com>
 
-allOf:
-  - $ref: spi-controller.yaml#
+description: |
+  Broadcom Broadband SoC supports High Speed SPI master controller since the
+  early MIPS based chips such as BCM6328 and BCM63268.  This initial rev 1.0
+  controller was carried over to recent ARM based chips, such as BCM63138,
+  BCM4908 and BCM6858. The old MIPS based chip should continue to use the
+  brcm,bcm6328-hsspi compatible string. The recent ARM based chip is required to
+  use the brcm,bcmbca-hsspi-v1.0 as part of its compatible string list as
+  defined below to match the specific chip along with ip revision info.
+
+  This rev 1.0 controller has a limitation that can not keep the chip select line
+  active between the SPI transfers within the same SPI message. This can
+  terminate the transaction to some SPI devices prematurely. The issue can be
+  worked around by either the controller's prepend mode or using the dummy chip
+  select workaround. Driver automatically picks the suitable mode based on
+  transfer type so it is transparent to the user.
+
+  The newer SoCs such as BCM6756, BCM4912 and BCM6855 include an updated SPI
+  controller rev 1.1 that add the capability to allow the driver to control chip
+  select explicitly. This solves the issue in the old controller.
 
 properties:
   compatible:
-    const: brcm,bcm6328-hsspi
+    oneOf:
+      - const: brcm,bcm6328-hsspi
+      - items:
+          - enum:
+              - brcm,bcm47622-hsspi
+              - brcm,bcm4908-hsspi
+              - brcm,bcm63138-hsspi
+              - brcm,bcm63146-hsspi
+              - brcm,bcm63148-hsspi
+              - brcm,bcm63158-hsspi
+              - brcm,bcm63178-hsspi
+              - brcm,bcm6846-hsspi
+              - brcm,bcm6856-hsspi
+              - brcm,bcm6858-hsspi
+              - brcm,bcm6878-hsspi
+          - const: brcm,bcmbca-hsspi-v1.0
+          - const: brcm,bcmbca-hsspi
+      - items:
+          - enum:
+              - brcm,bcm4912-hsspi
+              - brcm,bcm6756-hsspi
+              - brcm,bcm6813-hsspi
+              - brcm,bcm6855-hsspi
+          - const: brcm,bcmbca-hsspi-v1.1
+          - const: brcm,bcmbca-hsspi
 
   reg:
-    maxItems: 1
+    items:
+      - description: main registers
+      - description: miscellaneous control registers
+    minItems: 1
+
+  reg-names:
+    items:
+      - const: hsspi
+      - const: spim-ctrl
+    minItems: 1
 
   clocks:
     items:
@@ -39,10 +92,39 @@  required:
   - clock-names
   - interrupts
 
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm6328-hsspi
+              - brcm,bcmbca-hsspi-v1.0
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 1
+        reg-names:
+          minItems: 1
+          maxItems: 1
+    else:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+        reg-names:
+          minItems: 2
+          maxItems: 2
+      required:
+        - reg-names
+
 unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
     spi@10001000 {
         compatible = "brcm,bcm6328-hsspi";
         reg = <0x10001000 0x600>;
@@ -53,3 +135,17 @@  examples:
         #address-cells = <1>;
         #size-cells = <0>;
     };
+  - |
+    spi@ff801000 {
+        compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1",
+                     "brcm,bcmbca-hsspi";
+        reg = <0xff801000 0x1000>,
+              <0xff802610 0x4>;
+        reg-names = "hsspi", "spim-ctrl";
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&hsspi>, <&hsspi_pll>;
+        clock-names = "hsspi", "pll";
+        num-cs = <8>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };