@@ -30,6 +30,7 @@
enum tas572x_type {
TAS5720,
+ TAS5720A_Q1,
TAS5722,
};
@@ -166,17 +167,26 @@ static int tas5720_set_dai_tdm_slot(struct snd_soc_dai *dai,
return -EINVAL;
}
- /* Enable manual TDM slot selection (instead of I2C ID based) */
- ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL1_REG,
- TAS5720_TDM_CFG_SRC, TAS5720_TDM_CFG_SRC);
- if (ret < 0)
- goto error_snd_soc_component_update_bits;
+ /*
+ * Enable manual TDM slot selection (instead of I2C ID based).
+ * This is not applicable to TAS5720A-Q1.
+ */
+ switch (tas5720->devtype) {
+ case TAS5720A_Q1:
+ break;
+ default:
+ ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL1_REG,
+ TAS5720_TDM_CFG_SRC, TAS5720_TDM_CFG_SRC);
+ if (ret < 0)
+ goto error_snd_soc_component_update_bits;
- /* Configure the TDM slot to process audio from */
- ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL2_REG,
- TAS5720_TDM_SLOT_SEL_MASK, first_slot);
- if (ret < 0)
- goto error_snd_soc_component_update_bits;
+ /* Configure the TDM slot to process audio from */
+ ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL2_REG,
+ TAS5720_TDM_SLOT_SEL_MASK, first_slot);
+ if (ret < 0)
+ goto error_snd_soc_component_update_bits;
+ break;
+ }
/* Configure TDM slot width. This is only applicable to TAS5722. */
switch (tas5720->devtype) {
@@ -201,10 +211,22 @@ static int tas5720_set_dai_tdm_slot(struct snd_soc_dai *dai,
static int tas5720_mute_soc_component(struct snd_soc_component *component, int mute)
{
+ struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component);
+ unsigned int reg, mask;
int ret;
- ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL2_REG,
- TAS5720_MUTE, mute ? TAS5720_MUTE : 0);
+ switch (tas5720->devtype) {
+ case TAS5720A_Q1:
+ reg = TAS5720_Q1_VOLUME_CTRL_CFG_REG;
+ mask = TAS5720_Q1_MUTE;
+ break;
+ default:
+ reg = TAS5720_DIGITAL_CTRL2_REG;
+ mask = TAS5720_MUTE;
+ break;
+ }
+
+ ret = snd_soc_component_update_bits(component, reg, mask, mute ? mask : 0);
if (ret < 0) {
dev_err(component->dev, "error (un-)muting device: %d\n", ret);
return ret;
@@ -309,6 +331,9 @@ static int tas5720_codec_probe(struct snd_soc_component *component)
case TAS5720:
expected_device_id = TAS5720_DEVICE_ID;
break;
+ case TAS5720A_Q1:
+ expected_device_id = TAS5720A_Q1_DEVICE_ID;
+ break;
case TAS5722:
expected_device_id = TAS5722_DEVICE_ID;
break;
@@ -474,6 +499,15 @@ static const struct regmap_config tas5720_regmap_config = {
.volatile_reg = tas5720_is_volatile_reg,
};
+static const struct regmap_config tas5720a_q1_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = TAS5720_MAX_REG,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = tas5720_is_volatile_reg,
+};
+
static const struct regmap_config tas5722_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -494,6 +528,16 @@ static const DECLARE_TLV_DB_RANGE(dac_analog_tlv,
0x3, 0x3, TLV_DB_SCALE_ITEM(2630, 0, 0),
);
+/*
+ * DAC analog gain for TAS5720A-Q1. There are three discrete values to select from, ranging
+ * from 19.2 dB to 25.0dB.
+ */
+static const DECLARE_TLV_DB_RANGE(dac_analog_tlv_a_q1,
+ 0x0, 0x0, TLV_DB_SCALE_ITEM(1920, 0, 0),
+ 0x1, 0x1, TLV_DB_SCALE_ITEM(2260, 0, 0),
+ 0x2, 0x2, TLV_DB_SCALE_ITEM(2500, 0, 0),
+);
+
/*
* DAC digital volumes. From -103.5 to 24 dB in 0.5 dB or 0.25 dB steps
* depending on the device. Note that setting the gain below -100 dB
@@ -540,6 +584,15 @@ static const struct snd_kcontrol_new tas5720_snd_controls[] = {
TAS5720_ANALOG_GAIN_SHIFT, 3, 0, dac_analog_tlv),
};
+static const struct snd_kcontrol_new tas5720a_q1_snd_controls[] = {
+ SOC_DOUBLE_R_TLV("Speaker Driver Playback Volume",
+ TAS5720_Q1_VOLUME_CTRL_LEFT_REG,
+ TAS5720_Q1_VOLUME_CTRL_RIGHT_REG,
+ 0, 0xff, 0, tas5720_dac_tlv),
+ SOC_SINGLE_TLV("Speaker Driver Analog Gain", TAS5720_ANALOG_CTRL_REG,
+ TAS5720_ANALOG_GAIN_SHIFT, 3, 0, dac_analog_tlv_a_q1),
+};
+
static const struct snd_kcontrol_new tas5722_snd_controls[] = {
SOC_SINGLE_EXT_TLV("Speaker Driver Playback Volume",
0, 0, 511, 0,
@@ -577,6 +630,22 @@ static const struct snd_soc_component_driver soc_component_dev_tas5720 = {
.endianness = 1,
};
+static const struct snd_soc_component_driver soc_component_dev_tas5720_a_q1 = {
+ .probe = tas5720_codec_probe,
+ .remove = tas5720_codec_remove,
+ .suspend = tas5720_suspend,
+ .resume = tas5720_resume,
+ .controls = tas5720a_q1_snd_controls,
+ .num_controls = ARRAY_SIZE(tas5720a_q1_snd_controls),
+ .dapm_widgets = tas5720_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(tas5720_dapm_widgets),
+ .dapm_routes = tas5720_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(tas5720_audio_map),
+ .idle_bias_on = 1,
+ .use_pmdown_time = 1,
+ .endianness = 1,
+};
+
static const struct snd_soc_component_driver soc_component_dev_tas5722 = {
.probe = tas5720_codec_probe,
.remove = tas5720_codec_remove,
@@ -636,6 +705,7 @@ static struct snd_soc_dai_driver tas5720_dai[] = {
static const struct i2c_device_id tas5720_id[] = {
{ "tas5720", TAS5720 },
+ { "tas5720a-q1", TAS5720A_Q1 },
{ "tas5722", TAS5722 },
{ }
};
@@ -662,6 +732,9 @@ static int tas5720_probe(struct i2c_client *client)
case TAS5720:
regmap_config = &tas5720_regmap_config;
break;
+ case TAS5720A_Q1:
+ regmap_config = &tas5720a_q1_regmap_config;
+ break;
case TAS5722:
regmap_config = &tas5722_regmap_config;
break;
@@ -695,6 +768,12 @@ static int tas5720_probe(struct i2c_client *client)
tas5720_dai,
ARRAY_SIZE(tas5720_dai));
break;
+ case TAS5720A_Q1:
+ ret = devm_snd_soc_register_component(&client->dev,
+ &soc_component_dev_tas5720_a_q1,
+ tas5720_dai,
+ ARRAY_SIZE(tas5720_dai));
+ break;
case TAS5722:
ret = devm_snd_soc_register_component(&client->dev,
&soc_component_dev_tas5722,
@@ -716,6 +795,7 @@ static int tas5720_probe(struct i2c_client *client)
#if IS_ENABLED(CONFIG_OF)
static const struct of_device_id tas5720_of_match[] = {
{ .compatible = "ti,tas5720", },
+ { .compatible = "ti,tas5720a-q1", },
{ .compatible = "ti,tas5722", },
{ },
};
@@ -10,7 +10,7 @@
#ifndef __TAS5720_H__
#define __TAS5720_H__
-/* Register Address Map */
+/* Register Address Map - first 3 regs are common for all variants */
#define TAS5720_DEVICE_ID_REG 0x00
#define TAS5720_POWER_CTRL_REG 0x01
#define TAS5720_DIGITAL_CTRL1_REG 0x02
@@ -27,7 +27,13 @@
#define TAS5722_ANALOG_CTRL2_REG 0x14
#define TAS5722_MAX_REG TAS5722_ANALOG_CTRL2_REG
+/* Register Address Map - volume controls for the TAS5720-Q1 variant */
+#define TAS5720_Q1_VOLUME_CTRL_CFG_REG 0x03
+#define TAS5720_Q1_VOLUME_CTRL_LEFT_REG 0x04
+#define TAS5720_Q1_VOLUME_CTRL_RIGHT_REG 0x05
+
/* TAS5720_DEVICE_ID_REG */
+#define TAS5720A_Q1_DEVICE_ID 0x00
#define TAS5720_DEVICE_ID 0x01
#define TAS5722_DEVICE_ID 0x12
@@ -53,6 +59,10 @@
#define TAS5720_MUTE BIT(4)
#define TAS5720_TDM_SLOT_SEL_MASK GENMASK(2, 0)
+/* TAS5720_Q1_VOLUME_CTRL_CFG_REG */
+#define TAS5720_Q1_FADE BIT(7)
+#define TAS5720_Q1_MUTE GENMASK(1, 0)
+
/* TAS5720_ANALOG_CTRL_REG */
#define TAS5720_PWM_RATE_6_3_FSYNC (0x0 << 4)
#define TAS5720_PWM_RATE_8_4_FSYNC (0x1 << 4)
@@ -70,6 +80,9 @@
#define TAS5720_ANALOG_GAIN_MASK GENMASK(3, 2)
#define TAS5720_ANALOG_GAIN_SHIFT (0x2)
+/* TAS5720_Q1_ANALOG_CTRL_REG */
+#define TAS5720_Q1_CHAN_SEL BIT(1)
+
/* TAS5720_FAULT_REG */
#define TAS5720_OC_THRESH_100PCT (0x0 << 4)
#define TAS5720_OC_THRESH_75PCT (0x1 << 4)