@@ -130,6 +130,15 @@ config ARM_MEDIATEK_CCI_DEVFREQ
buck voltages and update a proper CCI frequency. Use the notification
to get the regulator status.
+config ARM_QCOM_CCI_DEVFREQ
+ tristate "QUALCOMM CCI DEVFREQ Driver"
+ depends on ARCH_QCOM || COMPILE_TEST
+ select DEVFREQ_GOV_PASSIVE
+ help
+ This adds a devfreq driver for Qualcomm Cache Coherent Interconnect which
+ shares the same regulator with the cpu cluster. This driver can track a
+ proper regulator state while CCI frequency is updated.
+
config ARM_RK3399_DMC_DEVFREQ
tristate "ARM RK3399 DMC DEVFREQ Driver"
depends on (ARCH_ROCKCHIP && HAVE_ARM_SMCCC) || \
@@ -12,6 +12,7 @@ obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ) += exynos-bus.o
obj-$(CONFIG_ARM_IMX_BUS_DEVFREQ) += imx-bus.o
obj-$(CONFIG_ARM_IMX8M_DDRC_DEVFREQ) += imx8m-ddrc.o
obj-$(CONFIG_ARM_MEDIATEK_CCI_DEVFREQ) += mtk-cci-devfreq.o
+obj-$(CONFIG_ARM_QCOM_CCI_DEVFREQ) += qcom-cci.o
obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += rk3399_dmc.o
obj-$(CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ) += sun8i-a33-mbus.o
obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra30-devfreq.o
new file mode 100644
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2023 Linaro Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/devfreq.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_device.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define SPEED_PVS(s, p) ((s << 16) | p)
+
+struct qcom_cci {
+ struct devfreq_dev_profile profile;
+ struct devfreq *devfreq;
+ struct clk *clk;
+};
+
+static int qcom_cci_target(struct device *dev,
+ unsigned long *freq, u32 flags)
+{
+ struct dev_pm_opp *new_opp;
+ int ret;
+
+ new_opp = devfreq_recommended_opp(dev, freq, flags);
+ if (IS_ERR(new_opp)) {
+ ret = PTR_ERR(new_opp);
+ dev_err(dev, "failed to get recommended opp: %d\n", ret);
+ return ret;
+ }
+ dev_pm_opp_put(new_opp);
+
+ return dev_pm_opp_set_rate(dev, *freq);
+}
+
+static int qcom_cci_get_cur_freq(struct device *dev, unsigned long *freq)
+{
+ struct qcom_cci *priv = dev_get_drvdata(dev);
+
+ *freq = clk_get_rate(priv->clk);
+
+ return 0;
+}
+
+static int qcom_get_dev_version(struct nvmem_cell *speedbin_nvmem)
+{
+ int speed = 0, pvs = 0;
+ u8 *speedbin;
+ size_t len;
+
+ speedbin = nvmem_cell_read(speedbin_nvmem, &len);
+ if (IS_ERR(speedbin))
+ return PTR_ERR(speedbin);
+
+ speed = (speedbin[0xc] >> 2) & 0x7;
+ pvs = (speedbin[0x3] >> 5 & 0x1) | ((speedbin[0x6] >> 2 & 0x3) << 1);
+ kfree(speedbin);
+
+ /* Convert speedbin and PVS into version bit map */
+ switch (SPEED_PVS(speed, pvs)) {
+ case SPEED_PVS(0, 0): return 0x1;
+ case SPEED_PVS(2, 0): return 0x2;
+ case SPEED_PVS(2, 2): return 0x4;
+ case SPEED_PVS(4, 0): return 0x8;
+ case SPEED_PVS(5, 0): return 0x10;
+ case SPEED_PVS(5, 6): return 0x20;
+ default:
+ return 0x1;
+ }
+}
+
+static void qcom_cci_exit(struct device *dev)
+{
+ dev_pm_opp_of_remove_table(dev);
+}
+
+static int qcom_cci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct qcom_cci *priv;
+ const char *gov = DEVFREQ_GOV_USERSPACE;
+ struct device_node *np = dev->of_node;
+ struct nvmem_cell *speedbin_nvmem;
+ int ret;
+ u32 version;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ ret = PTR_ERR(priv->clk);
+ dev_err(dev, "failed to fetch clk: %d\n", ret);
+ return ret;
+ }
+ platform_set_drvdata(pdev, priv);
+
+ /* Check whether we have profiled speed version per chip */
+ speedbin_nvmem = of_nvmem_cell_get(np, NULL);
+ if (IS_ERR(speedbin_nvmem))
+ return PTR_ERR(speedbin_nvmem);
+
+ version = qcom_get_dev_version(speedbin_nvmem);
+ dev_info(dev, "%s: set opp table version 0x%x\n", __func__, version);
+
+ nvmem_cell_put(speedbin_nvmem);
+ ret = dev_pm_opp_set_supported_hw(dev, &version, 1);
+ if (ret) {
+ dev_err(dev, "Failed to set supported hardware\n");
+ return ret;
+ }
+
+ ret = dev_pm_opp_of_add_table(dev);
+ if (ret < 0) {
+ dev_err(dev, "failed to get OPP table\n");
+ return ret;
+ }
+
+ priv->profile.target = qcom_cci_target;
+ priv->profile.exit = qcom_cci_exit;
+ priv->profile.get_cur_freq = qcom_cci_get_cur_freq;
+ priv->profile.initial_freq = clk_get_rate(priv->clk);
+
+ priv->devfreq = devm_devfreq_add_device(dev, &priv->profile,
+ gov, NULL);
+ if (IS_ERR(priv->devfreq)) {
+ ret = PTR_ERR(priv->devfreq);
+ dev_err(dev, "failed to add devfreq device: %d\n", ret);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ dev_pm_opp_of_remove_table(dev);
+ return ret;
+}
+
+static const struct of_device_id qcom_cci_of_match[] = {
+ { .compatible = "qcom,msm8939-cci"},
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, qcom_cci_of_match);
+
+static struct platform_driver qcom_cci_platdrv = {
+ .probe = qcom_cci_probe,
+ .driver = {
+ .name = "qcom-cci-devfreq",
+ .of_match_table = qcom_cci_of_match,
+ },
+};
+module_platform_driver(qcom_cci_platdrv);
+
+MODULE_DESCRIPTION("QCOM cci frequency scaling driver");
+MODULE_AUTHOR("Jun Nie <jun.nie@linaro.org>");
+MODULE_LICENSE("GPL");
Cache Coherent Interconnect (CCI) is used by some Qualcomm SoCs. This driver is introduced so that its freqency can be adjusted. And regulator associated with opp table can be also adjusted accordingly which is shared with cpu cluster. Signed-off-by: Jun Nie <jun.nie@linaro.org> --- drivers/devfreq/Kconfig | 9 +++ drivers/devfreq/Makefile | 1 + drivers/devfreq/qcom-cci.c | 162 +++++++++++++++++++++++++++++++++++++ 3 files changed, 172 insertions(+) create mode 100644 drivers/devfreq/qcom-cci.c