diff mbox series

[1/2] dt-bindings: arm: qcom: add QRD8550

Message ID 20230210163844.765074-1-krzysztof.kozlowski@linaro.org
State Accepted
Commit 06668b6f7d5b0bdbda30673785d7540c72caae17
Headers show
Series [1/2] dt-bindings: arm: qcom: add QRD8550 | expand

Commit Message

Krzysztof Kozlowski Feb. 10, 2023, 4:38 p.m. UTC
Add board compatible for QRD8550 - a mobile-like development board with
SM8550.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
 1 file changed, 1 insertion(+)

Comments

Abel Vesa Feb. 11, 2023, 6:47 p.m. UTC | #1
On 23-02-10 17:38:43, Krzysztof Kozlowski wrote:
> Add board compatible for QRD8550 - a mobile-like development board with
> SM8550.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Reviewed-by: Abel Vesa <abel.vesa@linaro.org>

> ---
>  Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
> index 8b90b8d7e858..b1c6f0ad8c36 100644
> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
> @@ -903,6 +903,7 @@ properties:
>        - items:
>            - enum:
>                - qcom,sm8550-mtp
> +              - qcom,sm8550-qrd
>            - const: qcom,sm8550
>  
>    # Board compatibles go above
> -- 
> 2.34.1
>
Abel Vesa Feb. 11, 2023, 6:54 p.m. UTC | #2
On 23-02-10 17:38:44, Krzysztof Kozlowski wrote:
> Add a minimal DTS for the new QRD8550 board - a mobile-like development
> board with SM8550.  Serial, UFS and USB should be working.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Reviewed-by: Abel Vesa <abel.vesa@linaro.org>

> 
> ---
> 
> UFS should be working the same as on MTP8550, but both fail on next and
> patches from lists are needed (same as on MTP8550).

I believe it should be working fine on next-20230210, since both the
HC and the PHY drivers updates have been merged.

> ---
>  arch/arm64/boot/dts/qcom/Makefile       |   1 +
>  arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 439 ++++++++++++++++++++++++
>  2 files changed, 440 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sm8550-qrd.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 359e428e49b3..29d5bb0403de 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -197,3 +197,4 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-qrd.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx223.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx224.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-qrd.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
> new file mode 100644
> index 000000000000..d5a645ee2a61
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
> @@ -0,0 +1,439 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Linaro Limited
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "sm8550.dtsi"
> +#include "pm8010.dtsi"
> +#include "pm8550.dtsi"
> +#include "pm8550b.dtsi"
> +#include "pm8550ve.dtsi"
> +#include "pm8550vs.dtsi"
> +#include "pmk8550.dtsi"
> +#include "pmr735d.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. SM8550 QRD";
> +	compatible = "qcom,sm8550-qrd", "qcom,sm8550";
> +
> +	aliases {
> +		serial0 = &uart7;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	vph_pwr: vph-pwr-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vph_pwr";
> +		regulator-min-microvolt = <3700000>;
> +		regulator-max-microvolt = <3700000>;
> +
> +		regulator-always-on;
> +		regulator-boot-on;
> +	};
> +};
> +
> +&apps_rsc {
> +	regulators-0 {
> +		compatible = "qcom,pm8550-rpmh-regulators";
> +		qcom,pmic-id = "b";
> +
> +		vdd-bob1-supply = <&vph_pwr>;
> +		vdd-bob2-supply = <&vph_pwr>;
> +		vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
> +		vdd-l2-l13-l14-supply = <&vreg_bob1>;
> +		vdd-l3-supply = <&vreg_s4g_1p25>;
> +		vdd-l5-l16-supply = <&vreg_bob1>;
> +		vdd-l6-l7-supply = <&vreg_bob1>;
> +		vdd-l8-l9-supply = <&vreg_bob1>;
> +		vdd-l11-supply = <&vreg_s4g_1p25>;
> +		vdd-l12-supply = <&vreg_s6g_1p86>;
> +		vdd-l15-supply = <&vreg_s6g_1p86>;
> +		vdd-l17-supply = <&vreg_bob2>;
> +
> +		vreg_bob1: bob1 {
> +			regulator-name = "vreg_bob1";
> +			regulator-min-microvolt = <3296000>;
> +			regulator-max-microvolt = <3960000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_bob2: bob2 {
> +			regulator-name = "vreg_bob2";
> +			regulator-min-microvolt = <2720000>;
> +			regulator-max-microvolt = <3960000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l1b_1p8: ldo1 {
> +			regulator-name = "vreg_l1b_1p8";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l2b_3p0: ldo2 {
> +			regulator-name = "vreg_l2b_3p0";
> +			regulator-min-microvolt = <3008000>;
> +			regulator-max-microvolt = <3008000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l5b_3p1: ldo5 {
> +			regulator-name = "vreg_l5b_3p1";
> +			regulator-min-microvolt = <3104000>;
> +			regulator-max-microvolt = <3104000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l6b_1p8: ldo6 {
> +			regulator-name = "vreg_l6b_1p8";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <3008000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l7b_1p8: ldo7 {
> +			regulator-name = "vreg_l7b_1p8";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <3008000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l8b_1p8: ldo8 {
> +			regulator-name = "vreg_l8b_1p8";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <3008000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l9b_2p9: ldo9 {
> +			regulator-name = "vreg_l9b_2p9";
> +			regulator-min-microvolt = <2960000>;
> +			regulator-max-microvolt = <3008000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l11b_1p2: ldo11 {
> +			regulator-name = "vreg_l11b_1p2";
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1504000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l12b_1p8: ldo12 {
> +			regulator-name = "vreg_l12b_1p8";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l13b_3p0: ldo13 {
> +			regulator-name = "vreg_l13b_3p0";
> +			regulator-min-microvolt = <3000000>;
> +			regulator-max-microvolt = <3000000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l14b_3p2: ldo14 {
> +			regulator-name = "vreg_l14b_3p2";
> +			regulator-min-microvolt = <3200000>;
> +			regulator-max-microvolt = <3200000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l15b_1p8: ldo15 {
> +			regulator-name = "vreg_l15b_1p8";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l16b_2p8: ldo16 {
> +			regulator-name = "vreg_l16b_2p8";
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l17b_2p5: ldo17 {
> +			regulator-name = "vreg_l17b_2p5";
> +			regulator-min-microvolt = <2504000>;
> +			regulator-max-microvolt = <2504000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +	};
> +
> +	regulators-1 {
> +		compatible = "qcom,pm8550vs-rpmh-regulators";
> +		qcom,pmic-id = "c";
> +
> +		vdd-l1-supply = <&vreg_s4g_1p25>;
> +		vdd-l2-supply = <&vreg_s4e_0p95>;
> +		vdd-l3-supply = <&vreg_s4e_0p95>;
> +
> +		vreg_l3c_0p9: ldo3 {
> +			regulator-name = "vreg_l3c_0p9";
> +			regulator-min-microvolt = <880000>;
> +			regulator-max-microvolt = <912000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +	};
> +
> +	regulators-2 {
> +		compatible = "qcom,pm8550vs-rpmh-regulators";
> +		qcom,pmic-id = "d";
> +
> +		vdd-l1-supply = <&vreg_s4e_0p95>;
> +		vdd-l2-supply = <&vreg_s4e_0p95>;
> +		vdd-l3-supply = <&vreg_s4e_0p95>;
> +
> +		vreg_l1d_0p88: ldo1 {
> +			regulator-name = "vreg_l1d_0p88";
> +			regulator-min-microvolt = <880000>;
> +			regulator-max-microvolt = <920000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		/* ldo2 supplies SM8550 VDD_LPI_MX */
> +	};
> +
> +	regulators-3 {
> +		compatible = "qcom,pm8550vs-rpmh-regulators";
> +		qcom,pmic-id = "e";
> +
> +		vdd-l1-supply = <&vreg_s4e_0p95>;
> +		vdd-l2-supply = <&vreg_s4e_0p95>;
> +		vdd-l3-supply = <&vreg_s4g_1p25>;
> +		vdd-s4-supply = <&vph_pwr>;
> +		vdd-s5-supply = <&vph_pwr>;
> +
> +		vreg_s4e_0p95: smps4 {
> +			regulator-name = "vreg_s4e_0p95";
> +			regulator-min-microvolt = <904000>;
> +			regulator-max-microvolt = <984000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_s5e_1p08: smps5 {
> +			regulator-name = "vreg_s5e_1p08";
> +			regulator-min-microvolt = <1080000>;
> +			regulator-max-microvolt = <1120000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l1e_0p88: ldo1 {
> +			regulator-name = "vreg_l1e_0p88";
> +			regulator-min-microvolt = <880000>;
> +			regulator-max-microvolt = <880000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l2e_0p9: ldo2 {
> +			regulator-name = "vreg_l2e_0p9";
> +			regulator-min-microvolt = <904000>;
> +			regulator-max-microvolt = <970000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l3e_1p2: ldo3 {
> +			regulator-name = "vreg_l3e_1p2";
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1200000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +	};
> +
> +	regulators-4 {
> +		compatible = "qcom,pm8550ve-rpmh-regulators";
> +		qcom,pmic-id = "f";
> +
> +		vdd-l1-supply = <&vreg_s4e_0p95>;
> +		vdd-l2-supply = <&vreg_s4e_0p95>;
> +		vdd-l3-supply = <&vreg_s4e_0p95>;
> +		vdd-s4-supply = <&vph_pwr>;
> +
> +		vreg_s4f_0p5: smps4 {
> +			regulator-name = "vreg_s4f_0p5";
> +			regulator-min-microvolt = <500000>;
> +			regulator-max-microvolt = <700000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l1f_0p9: ldo1 {
> +			regulator-name = "vreg_l1f_0p9";
> +			regulator-min-microvolt = <912000>;
> +			regulator-max-microvolt = <912000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l2f_0p88: ldo2 {
> +			regulator-name = "vreg_l2f_0p88";
> +			regulator-min-microvolt = <880000>;
> +			regulator-max-microvolt = <912000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l3f_0p88: ldo3 {
> +			regulator-name = "vreg_l3f_0p88";
> +			regulator-min-microvolt = <880000>;
> +			regulator-max-microvolt = <912000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +	};
> +
> +	regulators-5 {
> +		compatible = "qcom,pm8550vs-rpmh-regulators";
> +		qcom,pmic-id = "g";
> +
> +		vdd-l1-supply = <&vreg_s4g_1p25>;
> +		vdd-l2-supply = <&vreg_s4g_1p25>;
> +		vdd-l3-supply = <&vreg_s4g_1p25>;
> +		vdd-s1-supply = <&vph_pwr>;
> +		vdd-s2-supply = <&vph_pwr>;
> +		vdd-s3-supply = <&vph_pwr>;
> +		vdd-s4-supply = <&vph_pwr>;
> +		vdd-s5-supply = <&vph_pwr>;
> +		vdd-s6-supply = <&vph_pwr>;
> +
> +		vreg_s1g_1p25: smps1 {
> +			regulator-name = "vreg_s1g_1p25";
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1300000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_s2g_0p85: smps2 {
> +			regulator-name = "vreg_s2g_0p85";
> +			regulator-min-microvolt = <800000>;
> +			regulator-max-microvolt = <1000000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_s3g_0p8: smps3 {
> +			regulator-name = "vreg_s3g_0p8";
> +			regulator-min-microvolt = <300000>;
> +			regulator-max-microvolt = <1004000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_s4g_1p25: smps4 {
> +			regulator-name = "vreg_s4g_1p25";
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1352000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_s5g_0p85: smps5 {
> +			regulator-name = "vreg_s5g_0p85";
> +			regulator-min-microvolt = <500000>;
> +			regulator-max-microvolt = <1004000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_s6g_1p86: smps6 {
> +			regulator-name = "vreg_s6g_1p86";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <2000000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l1g_1p2: ldo1 {
> +			regulator-name = "vreg_l1g_1p2";
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1200000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l3g_1p2: ldo3 {
> +			regulator-name = "vreg_l3g_1p2";
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1200000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +	};
> +};
> +
> +&qupv3_id_0 {
> +	status = "okay";
> +};
> +
> +&remoteproc_adsp {
> +	firmware-name = "qcom/sm8550/adsp.mbn",
> +			"qcom/sm8550/adsp_dtb.mbn";
> +	status = "okay";
> +};
> +
> +&remoteproc_cdsp {
> +	firmware-name = "qcom/sm8550/cdsp.mbn",
> +			"qcom/sm8550/cdsp_dtb.mbn";
> +	status = "okay";
> +};
> +
> +&remoteproc_mpss {
> +	firmware-name = "qcom/sm8550/modem.mbn",
> +			"qcom/sm8550/modem_dtb.mbn";
> +	status = "okay";
> +};
> +
> +&sleep_clk {
> +	clock-frequency = <32000>;
> +};
> +
> +&tlmm {
> +	gpio-reserved-ranges = <32 8>;
> +};
> +
> +&uart7 {
> +	status = "okay";
> +};
> +
> +&ufs_mem_hc {
> +	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
> +	vcc-supply = <&vreg_l17b_2p5>;
> +	vcc-max-microamp = <1300000>;
> +	vccq-supply = <&vreg_l1g_1p2>;
> +	vccq-max-microamp = <1200000>;
> +	vccq2-supply = <&vreg_l3g_1p2>;
> +	vccq2-max-microamp = <100>;
> +
> +	status = "okay";
> +};
> +
> +&ufs_mem_phy {
> +	vdda-phy-supply = <&vreg_l1d_0p88>;
> +	vdda-pll-supply = <&vreg_l3e_1p2>;
> +
> +	status = "okay";
> +};
> +
> +&usb_1 {
> +	status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> +	dr_mode = "peripheral";
> +};
> +
> +&usb_1_hsphy {
> +	vdd-supply = <&vreg_l1e_0p88>;
> +	vdda12-supply = <&vreg_l3e_1p2>;
> +
> +	status = "okay";
> +};
> +
> +&usb_dp_qmpphy {
> +	vdda-phy-supply = <&vreg_l3e_1p2>;
> +	vdda-pll-supply = <&vreg_l3f_0p88>;
> +
> +	status = "okay";
> +};
> +
> +&xo_board {
> +	clock-frequency = <76800000>;
> +};
> -- 
> 2.34.1
>
Krzysztof Kozlowski Feb. 13, 2023, 11:24 a.m. UTC | #3
On 13/02/2023 12:14, Konrad Dybcio wrote:
> 
> 
> On 10.02.2023 17:38, Krzysztof Kozlowski wrote:
>> Add a minimal DTS for the new QRD8550 board - a mobile-like development
>> board with SM8550.  Serial, UFS and USB should be working.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>
>> ---
>>
> [...]
>> +
>> +		vreg_l17b_2p5: ldo17 {
>> +			regulator-name = "vreg_l17b_2p5";
>> +			regulator-min-microvolt = <2504000>;
>> +			regulator-max-microvolt = <2504000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> +		};
> 
> [...]
> 
>> +		};
>> +
>> +		vreg_l1g_1p2: ldo1 {
>> +			regulator-name = "vreg_l1g_1p2";
>> +			regulator-min-microvolt = <1200000>;
>> +			regulator-max-microvolt = <1200000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> +		};
>> +
>> +		vreg_l3g_1p2: ldo3 {
>> +			regulator-name = "vreg_l3g_1p2";
>> +			regulator-min-microvolt = <1200000>;
>> +			regulator-max-microvolt = <1200000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> +		};
>> +	};
> 
> [...]
> 
>> +
>> +&ufs_mem_hc {
>> +	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
>> +	vcc-supply = <&vreg_l17b_2p5>;
>> +	vcc-max-microamp = <1300000>;
>> +	vccq-supply = <&vreg_l1g_1p2>;
>> +	vccq-max-microamp = <1200000>;
>> +	vccq2-supply = <&vreg_l3g_1p2>;
> None of these regulators have allowed-modes + allow-set-load,
> I think you may want that.
> 
> With or without that:
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

It's something to fix also for SM8550 MTP.

Best regards,
Krzysztof
Bjorn Andersson March 15, 2023, 11:35 p.m. UTC | #4
On Fri, 10 Feb 2023 17:38:43 +0100, Krzysztof Kozlowski wrote:
> Add board compatible for QRD8550 - a mobile-like development board with
> SM8550.
> 
> 

Applied, thanks!

[2/2] arm64: dts: qcom: sm8550-qrd: add QRD8550
      commit: d228efe884692742e3a614c2386ee006aeb6551d

Best regards,
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 8b90b8d7e858..b1c6f0ad8c36 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -903,6 +903,7 @@  properties:
       - items:
           - enum:
               - qcom,sm8550-mtp
+              - qcom,sm8550-qrd
           - const: qcom,sm8550
 
   # Board compatibles go above