diff mbox series

[1/3] arm64: dts: qcom: qdu1000: Add IPCC, MPSS, AOSS nodes

Message ID 20230213190122.178501-2-quic_molvera@quicinc.com
State Superseded
Headers show
Series [1/3] arm64: dts: qcom: qdu1000: Add IPCC, MPSS, AOSS nodes | expand

Commit Message

Melody Olvera Feb. 13, 2023, 7:01 p.m. UTC
Add nodes for IPCC, MPSS, and AOSS drivers. Also update
the scm node to include its interconnect.

Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qdu1000.dtsi | 105 ++++++++++++++++++++++++++
 1 file changed, 105 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index f234159d2060..6e5fd3e9c3ae 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -8,6 +8,7 @@ 
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
@@ -141,6 +142,7 @@  CLUSTER_SLEEP_1: cluster-sleep-1 {
 	firmware {
 		scm {
 			compatible = "qcom,scm-qdu1000", "qcom,scm";
+			interconnects = <&system_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
 		};
 	};
 
@@ -326,6 +328,11 @@  q6_mpss_dtb_mem: q6-mpss-dtb@9ec00000 {
 			no-map;
 		};
 
+		mpss_dsm_mem: mpss-dsm@9ec80000 {
+			reg = <0x0 0x9ec80000 0x0 0x880000>;
+			no-map;
+		};
+
 		tenx_mem: tenx@a0000000 {
 			reg = <0x0 0xa0000000 0x0 0x19600000>;
 			no-map;
@@ -347,6 +354,28 @@  ipa_buffer_mem: ipa-buffer@c3200000 {
 		};
 	};
 
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					   IPCC_MPROC_SIGNAL_SMP2P
+					   IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -367,6 +396,15 @@  gcc: clock-controller@80000 {
 			#power-domain-cells = <1>;
 		};
 
+		ipcc: mailbox@408000 {
+			compatible = "qcom,qdu1000-ipcc", "qcom,ipcc";
+			reg = <0x0 0x408000 0x0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
 		gpi_dma0: dma-controller@900000  {
 			compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0x0 0x900000 0x0 0x60000>;
@@ -842,6 +880,49 @@  tcsr_mutex: hwlock@1f40000 {
 			#hwlock-cells = <1>;
 		};
 
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,qdu1000-mpss-pas";
+			reg = <0x0 0x4080000 0x0 0x4040>,
+			      <0x0 0x4180000 0x0 0x1000>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd QDU1000_CX>,
+					<&rpmhpd QDU1000_MSS>;
+			power-domain-names = "cx", "mss";
+
+			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, <&mpss_dsm_mem>;
+
+			interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,qdu1000-pdc", "qcom,pdc";
 			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
@@ -852,6 +933,30 @@  pdc: interrupt-controller@b220000 {
 			interrupt-controller;
 		};
 
+		aoss_qmp: power-controller@c300000 {
+			compatible = "qcom,qdu1000-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0xc300000 0x0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+						     IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+			#power-domain-cells = <1>;
+
+			cx_cdev: cx {
+				#cooling-cells = <2>;
+			};
+
+			mx_cdev: mx {
+				#cooling-cells = <2>;
+			};
+
+			ebi_cdev: ebi {
+				#cooling-cells = <2>;
+			};
+		};
+
 		spmi_bus: spmi@c400000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0xc400000 0x0 0x3000>,