diff mbox series

drivers: crypto: caam: jr: Allow quiesce when quiesced

Message ID 20230221054219.2142012-1-meenakshi.aggarwal@nxp.com
State Superseded
Headers show
Series drivers: crypto: caam: jr: Allow quiesce when quiesced | expand

Commit Message

Meenakshi Aggarwal Feb. 21, 2023, 5:42 a.m. UTC
From: Horia Geanta <horia.geanta@nxp.com>

Issues:
- Job ring device is busy when do kexec reboot
- Failed to flush job ring when do system suspend-resume

Fix:
Flush the job ring to stop the running jobs.

Signed-off-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
---
 drivers/crypto/caam/jr.c | 53 +++++++++++++++++++++++++++++++++-------
 1 file changed, 44 insertions(+), 9 deletions(-)

Comments

Vijay Balakrishna Feb. 21, 2023, 5:33 p.m. UTC | #1
On 2/20/2023 9:42 PM, meenakshi.aggarwal@nxp.com wrote:
> From: Horia Geanta <horia.geanta@nxp.com>
> 
> Issues:
> - Job ring device is busy when do kexec reboot
> - Failed to flush job ring when do system suspend-resume
> 
> Fix:
> Flush the job ring to stop the running jobs.
> 
> Signed-off-by: Horia Geanta <horia.geanta@nxp.com>
> Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>

Tested-by: Vijay Balakrishna <vijayb@linux.microsoft.com>

Thanks,
Vijay


> ---
>   drivers/crypto/caam/jr.c | 53 +++++++++++++++++++++++++++++++++-------
>   1 file changed, 44 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c
> index 724fdec18bf9..8745fe3cb575 100644
> --- a/drivers/crypto/caam/jr.c
> +++ b/drivers/crypto/caam/jr.c
> @@ -72,19 +72,27 @@ static void caam_jr_crypto_engine_exit(void *data)
>   	crypto_engine_exit(jrpriv->engine);
>   }
>   
> -static int caam_reset_hw_jr(struct device *dev)
> +/*
> + * Put the CAAM in quiesce, ie stop
> + *
> + * Must be called with itr disabled
> + */
> +static int caam_jr_stop_processing(struct device *dev, u32 jrcr_bits)
>   {
>   	struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
>   	unsigned int timeout = 100000;
>   
> -	/*
> -	 * mask interrupts since we are going to poll
> -	 * for reset completion status
> -	 */
> -	clrsetbits_32(&jrp->rregs->rconfig_lo, 0, JRCFG_IMSK);
> +	/* Check the current status */
> +	if (rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_INPROGRESS)
> +		goto wait_quiesce_completion;
>   
> -	/* initiate flush (required prior to reset) */
> -	wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
> +	/* Reset the field */
> +	clrsetbits_32(&jrp->rregs->jrintstatus, JRINT_ERR_HALT_MASK, 0);
> +
> +	/* initiate flush / park (required prior to reset) */
> +	wr_reg32(&jrp->rregs->jrcommand, jrcr_bits);
> +
> +wait_quiesce_completion:
>   	while (((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) ==
>   		JRINT_ERR_HALT_INPROGRESS) && --timeout)
>   		cpu_relax();
> @@ -95,8 +103,35 @@ static int caam_reset_hw_jr(struct device *dev)
>   		return -EIO;
>   	}
>   
> +	return 0;
> +}
> +
> +/*
> + * Flush the job ring, so the jobs running will be stopped, jobs queued will be
> + * invalidated and the CAAM will no longer fetch fron input ring.
> + *
> + * Must be called with itr disabled
> + */
> +static int caam_jr_flush(struct device *dev)
> +{
> +	return caam_jr_stop_processing(dev, JRCR_RESET);
> +}
> +
> +static int caam_reset_hw_jr(struct device *dev)
> +{
> +	struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
> +	unsigned int timeout = 100000;
> +	int err;
> +	/*
> +	 * mask interrupts since we are going to poll
> +	 * for reset completion status
> +	 */
> +	clrsetbits_32(&jrp->rregs->rconfig_lo, 0, JRCFG_IMSK);
> +	err = caam_jr_flush(dev);
> +	if (err)
> +		return err;
> +
>   	/* initiate reset */
> -	timeout = 100000;
>   	wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
>   	while ((rd_reg32(&jrp->rregs->jrcommand) & JRCR_RESET) && --timeout)
>   		cpu_relax();
Pankaj Gupta Feb. 27, 2023, 7:32 a.m. UTC | #2
Change the year in the License header.

After changing, you can add the reviewed by me.
Reviewed-By: Pankaj Gupta <pankaj.gupta@nxp.com>

> -----Original Message-----
> From: Vijay Balakrishna <vijayb@linux.microsoft.com>
> Sent: Tuesday, February 21, 2023 11:03 PM
> To: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>; Horia Geanta
> <horia.geanta@nxp.com>; Varun Sethi <V.Sethi@nxp.com>; Pankaj Gupta
> <pankaj.gupta@nxp.com>; Gaurav Jain <gaurav.jain@nxp.com>;
> herbert@gondor.apana.org.au; davem@davemloft.net; linux-
> crypto@vger.kernel.org; linux-kernel@vger.kernel.org; Franck Lenormand
> <franck.lenormand@nxp.com>
> Cc: code@tyhicks.com
> Subject: [EXT] Re: [PATCH] drivers: crypto: caam: jr: Allow quiesce when
> quiesced
> 
> Caution: EXT Email
> 
> On 2/20/2023 9:42 PM, meenakshi.aggarwal@nxp.com wrote:
> > From: Horia Geanta <horia.geanta@nxp.com>
> >
> > Issues:
> > - Job ring device is busy when do kexec reboot
> > - Failed to flush job ring when do system suspend-resume
> >
> > Fix:
> > Flush the job ring to stop the running jobs.
> >
> > Signed-off-by: Horia Geanta <horia.geanta@nxp.com>
> > Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
> 
> Tested-by: Vijay Balakrishna <vijayb@linux.microsoft.com>
> 
> Thanks,
> Vijay
> 
> 
> > ---
> >   drivers/crypto/caam/jr.c | 53 +++++++++++++++++++++++++++++++++-
> ------
> >   1 file changed, 44 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c index
> > 724fdec18bf9..8745fe3cb575 100644
> > --- a/drivers/crypto/caam/jr.c
> > +++ b/drivers/crypto/caam/jr.c
> > @@ -72,19 +72,27 @@ static void caam_jr_crypto_engine_exit(void *data)
> >       crypto_engine_exit(jrpriv->engine);
> >   }
> >
> > -static int caam_reset_hw_jr(struct device *dev)
> > +/*
> > + * Put the CAAM in quiesce, ie stop
> > + *
> > + * Must be called with itr disabled
> > + */
> > +static int caam_jr_stop_processing(struct device *dev, u32 jrcr_bits)
> >   {
> >       struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
> >       unsigned int timeout = 100000;
> >
> > -     /*
> > -      * mask interrupts since we are going to poll
> > -      * for reset completion status
> > -      */
> > -     clrsetbits_32(&jrp->rregs->rconfig_lo, 0, JRCFG_IMSK);
> > +     /* Check the current status */
> > +     if (rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_INPROGRESS)
> > +             goto wait_quiesce_completion;
> >
> > -     /* initiate flush (required prior to reset) */
> > -     wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
> > +     /* Reset the field */
> > +     clrsetbits_32(&jrp->rregs->jrintstatus, JRINT_ERR_HALT_MASK, 0);
> > +
> > +     /* initiate flush / park (required prior to reset) */
> > +     wr_reg32(&jrp->rregs->jrcommand, jrcr_bits);
> > +
> > +wait_quiesce_completion:
> >       while (((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK)
> ==
> >               JRINT_ERR_HALT_INPROGRESS) && --timeout)
> >               cpu_relax();
> > @@ -95,8 +103,35 @@ static int caam_reset_hw_jr(struct device *dev)
> >               return -EIO;
> >       }
> >
> > +     return 0;
> > +}
> > +
> > +/*
> > + * Flush the job ring, so the jobs running will be stopped, jobs
> > +queued will be
> > + * invalidated and the CAAM will no longer fetch fron input ring.
> > + *
> > + * Must be called with itr disabled
> > + */
> > +static int caam_jr_flush(struct device *dev) {
> > +     return caam_jr_stop_processing(dev, JRCR_RESET); }
> > +
> > +static int caam_reset_hw_jr(struct device *dev) {
> > +     struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
> > +     unsigned int timeout = 100000;
> > +     int err;
> > +     /*
> > +      * mask interrupts since we are going to poll
> > +      * for reset completion status
> > +      */
> > +     clrsetbits_32(&jrp->rregs->rconfig_lo, 0, JRCFG_IMSK);
> > +     err = caam_jr_flush(dev);
> > +     if (err)
> > +             return err;
> > +
> >       /* initiate reset */
> > -     timeout = 100000;
> >       wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
> >       while ((rd_reg32(&jrp->rregs->jrcommand) & JRCR_RESET) && --
> timeout)
> >               cpu_relax();
diff mbox series

Patch

diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c
index 724fdec18bf9..8745fe3cb575 100644
--- a/drivers/crypto/caam/jr.c
+++ b/drivers/crypto/caam/jr.c
@@ -72,19 +72,27 @@  static void caam_jr_crypto_engine_exit(void *data)
 	crypto_engine_exit(jrpriv->engine);
 }
 
-static int caam_reset_hw_jr(struct device *dev)
+/*
+ * Put the CAAM in quiesce, ie stop
+ *
+ * Must be called with itr disabled
+ */
+static int caam_jr_stop_processing(struct device *dev, u32 jrcr_bits)
 {
 	struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
 	unsigned int timeout = 100000;
 
-	/*
-	 * mask interrupts since we are going to poll
-	 * for reset completion status
-	 */
-	clrsetbits_32(&jrp->rregs->rconfig_lo, 0, JRCFG_IMSK);
+	/* Check the current status */
+	if (rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_INPROGRESS)
+		goto wait_quiesce_completion;
 
-	/* initiate flush (required prior to reset) */
-	wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
+	/* Reset the field */
+	clrsetbits_32(&jrp->rregs->jrintstatus, JRINT_ERR_HALT_MASK, 0);
+
+	/* initiate flush / park (required prior to reset) */
+	wr_reg32(&jrp->rregs->jrcommand, jrcr_bits);
+
+wait_quiesce_completion:
 	while (((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) ==
 		JRINT_ERR_HALT_INPROGRESS) && --timeout)
 		cpu_relax();
@@ -95,8 +103,35 @@  static int caam_reset_hw_jr(struct device *dev)
 		return -EIO;
 	}
 
+	return 0;
+}
+
+/*
+ * Flush the job ring, so the jobs running will be stopped, jobs queued will be
+ * invalidated and the CAAM will no longer fetch fron input ring.
+ *
+ * Must be called with itr disabled
+ */
+static int caam_jr_flush(struct device *dev)
+{
+	return caam_jr_stop_processing(dev, JRCR_RESET);
+}
+
+static int caam_reset_hw_jr(struct device *dev)
+{
+	struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
+	unsigned int timeout = 100000;
+	int err;
+	/*
+	 * mask interrupts since we are going to poll
+	 * for reset completion status
+	 */
+	clrsetbits_32(&jrp->rregs->rconfig_lo, 0, JRCFG_IMSK);
+	err = caam_jr_flush(dev);
+	if (err)
+		return err;
+
 	/* initiate reset */
-	timeout = 100000;
 	wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
 	while ((rd_reg32(&jrp->rregs->jrcommand) & JRCR_RESET) && --timeout)
 		cpu_relax();