| Message ID | 20230227091938.1671416-1-chancel.liu@nxp.com |
|---|---|
| State | Accepted |
| Commit | 5ddcf9768f7a15da997259038c16a9e00c06aa87 |
| Headers | show |
| Series | [v2,1/2] ASoC: dt-bindings: wlf,wm8524: Convert to json-schema | expand |
On 27/02/2023 10:19, Chancel Liu wrote: > Convert the Wolfson WM8524 24-bit 192KHz Stereo DAC device tree > binding documentation to json-schema. > > Signed-off-by: Chancel Liu <chancel.liu@nxp.com> > --- > .../devicetree/bindings/sound/wlf,wm8524.yaml | 40 +++++++++++++++++++ > .../devicetree/bindings/sound/wm8524.txt | 16 -------- > 2 files changed, 40 insertions(+), 16 deletions(-) > create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8524.yaml > delete mode 100644 Documentation/devicetree/bindings/sound/wm8524.txt > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Mon, Feb 27, 2023 at 05:19:38PM +0800, Chancel Liu wrote: > wm8524 should be unmuted while power up and muted while power down. > @@ -75,7 +75,7 @@ static int wm8524_startup(struct snd_pcm_substream *substream, > SNDRV_PCM_HW_PARAM_RATE, > &wm8524->rate_constraint); > > - gpiod_set_value_cansleep(wm8524->mute, 1); > + gpiod_set_value_cansleep(wm8524->mute, 0); > > return 0; > } I *think* the theory with these is that the device should be muted by default so that any noise during startup is minimised, and only unmuted when there's an actual audio stream, done in wm8524_mute_stream(). I am unclear why this default state is set up in startup(), or why we unmute in shutdown(). It could be that the startup thing is trying to work around some suspend/resume thing? In any case I'm not sure this helps, I think really we should just not be managing the GPIO in these functions at all and setting the default state to be muted when the GPIO is requested. With this change we'd move the unmute _mute_stream() does much earlier, meaning that any noise output by the SoC during startup will get played.
On Mon, Feb 27, 2023 at 05:19:37PM +0800, Chancel Liu wrote: > Convert the Wolfson WM8524 24-bit 192KHz Stereo DAC device tree > binding documentation to json-schema. I've queued this, no need to resend.
On Mon, 27 Feb 2023 17:19:37 +0800, Chancel Liu wrote: > Convert the Wolfson WM8524 24-bit 192KHz Stereo DAC device tree > binding documentation to json-schema. > > Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/2] ASoC: dt-bindings: wlf,wm8524: Convert to json-schema commit: 5ddcf9768f7a15da997259038c16a9e00c06aa87 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8524.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8524.yaml new file mode 100644 index 000000000000..4d951ece394e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8524.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8524.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson WM8524 24-bit 192KHz Stereo DAC + +maintainers: + - patches@opensource.cirrus.com + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: wlf,wm8524 + + "#sound-dai-cells": + const: 0 + + wlf,mute-gpios: + maxItems: 1 + description: + a GPIO spec for the MUTE pin. + +required: + - compatible + - wlf,mute-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + wm8524: codec { + compatible = "wlf,wm8524"; + wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/sound/wm8524.txt b/Documentation/devicetree/bindings/sound/wm8524.txt deleted file mode 100644 index f6c0c263b135..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8524.txt +++ /dev/null @@ -1,16 +0,0 @@ -WM8524 audio CODEC - -This device does not use I2C or SPI but a simple Hardware Control Interface. - -Required properties: - - - compatible : "wlf,wm8524" - - - wlf,mute-gpios: a GPIO spec for the MUTE pin. - -Example: - -wm8524: codec { - compatible = "wlf,wm8524"; - wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; -};
Convert the Wolfson WM8524 24-bit 192KHz Stereo DAC device tree binding documentation to json-schema. Signed-off-by: Chancel Liu <chancel.liu@nxp.com> --- .../devicetree/bindings/sound/wlf,wm8524.yaml | 40 +++++++++++++++++++ .../devicetree/bindings/sound/wm8524.txt | 16 -------- 2 files changed, 40 insertions(+), 16 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8524.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wm8524.txt