diff mbox series

[01/11] dt-bindings: remoteproc: qcom: Add support for multipd model

Message ID 1678164097-13247-2-git-send-email-quic_mmanikan@quicinc.com
State New
Headers show
Series Add multipd remoteproc support | expand

Commit Message

Manikanta Mylavarapu March 7, 2023, 4:41 a.m. UTC
Add new binding document for multipd model remoteproc.
IPQ5018, IPQ9574 follows multipd model.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
---
 .../bindings/remoteproc/qcom,multipd-pil.yaml | 282 ++++++++++++++++++
 1 file changed, 282 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml

Comments

Manikanta Mylavarapu May 3, 2023, 10:59 a.m. UTC | #1
On 3/7/2023 6:53 PM, Rob Herring wrote:
> 
> On Tue, 07 Mar 2023 10:11:27 +0530, Manikanta Mylavarapu wrote:
>> Add new binding document for multipd model remoteproc.
>> IPQ5018, IPQ9574 follows multipd model.
>>
>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
>> ---
>>   .../bindings/remoteproc/qcom,multipd-pil.yaml | 282 ++++++++++++++++++
>>   1 file changed, 282 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.example.dts:22:18: fatal error: dt-bindings/clock/qcom,gcc-ipq5018.h: No such file or directory
>     22 |         #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
>        |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> compilation terminated.
> make[1]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.example.dtb] Error 1
> make[1]: *** Waiting for unfinished jobs....
> make: *** [Makefile:1512: dt_binding_check] Error 2
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/1678164097-13247-2-git-send-email-quic_mmanikan@quicinc.com
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 

I mentioned dependency link 
(https://lore.kernel.org/linux-arm-msm/20220621161126.15883-1-quic_srichara@quicinc.com/) 
in cover page patch because it's required for entire series. I will add 
dependency link's and raise new patchset.

Thanks & Regards,
Manikanta.
Krzysztof Kozlowski May 3, 2023, 4:27 p.m. UTC | #2
On 03/05/2023 12:59, Manikanta Mylavarapu wrote:
> 
> 
> On 3/7/2023 6:53 PM, Rob Herring wrote:
>>
>> On Tue, 07 Mar 2023 10:11:27 +0530, Manikanta Mylavarapu wrote:
>>> Add new binding document for multipd model remoteproc.
>>> IPQ5018, IPQ9574 follows multipd model.
>>>
>>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
>>> ---
>>>   .../bindings/remoteproc/qcom,multipd-pil.yaml | 282 ++++++++++++++++++
>>>   1 file changed, 282 insertions(+)
>>>   create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
>>>
>>
>> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
>> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>>
>> yamllint warnings/errors:
>>
>> dtschema/dtc warnings/errors:
>> Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.example.dts:22:18: fatal error: dt-bindings/clock/qcom,gcc-ipq5018.h: No such file or directory
>>     22 |         #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
>>        |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> compilation terminated.
>> make[1]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.example.dtb] Error 1
>> make[1]: *** Waiting for unfinished jobs....
>> make: *** [Makefile:1512: dt_binding_check] Error 2
>>
>> doc reference errors (make refcheckdocs):
>>
>> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/1678164097-13247-2-git-send-email-quic_mmanikan@quicinc.com
>>
>> The base for the series is generally the latest rc1. A different dependency
>> should be noted in *this* patch.
>>
>> If you already ran 'make dt_binding_check' and didn't see the above
>> error(s), then make sure 'yamllint' is installed and dt-schema is up to
>> date:
>>
>> pip3 install dtschema --upgrade
>>
>> Please check and re-submit after running the above command yourself. Note
>> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
>> your schema. However, it must be unset to test all examples with your schema.
>>
> 
> I mentioned dependency link 
> (https://lore.kernel.org/linux-arm-msm/20220621161126.15883-1-quic_srichara@quicinc.com/) 
> in cover page patch because it's required for entire series. I will add 
> dependency link's and raise new patchset.

Is the dependency merged for v6.4-rc1? Looks not, so this means the
patch cannot be merged for next three months.

Why do you need any dependency here in this binding?

Best regards,
Krzysztof
Manikanta Mylavarapu May 8, 2023, 2:04 p.m. UTC | #3
On 3/7/2023 7:56 PM, Rob Herring wrote:
> On Tue, Mar 07, 2023 at 10:11:27AM +0530, Manikanta Mylavarapu wrote:
>> Add new binding document for multipd model remoteproc.
>> IPQ5018, IPQ9574 follows multipd model.
>>
>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
>> ---
>>   .../bindings/remoteproc/qcom,multipd-pil.yaml | 282 ++++++++++++++++++
>>   1 file changed, 282 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
>> new file mode 100644
>> index 000000000000..b788607f5abd
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
>> @@ -0,0 +1,282 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/remoteproc/qcom,multipd-pil.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm Multipd Secure Peripheral Image Loader
>> +
>> +maintainers:
>> +  - Bjorn Andersson <andersson@kernel.org>
>> +  - Mathieu Poirier <mathieu.poirier@linaro.org>
>> +
>> +description:
>> +  Multipd Peripheral Image Loader loads firmware and boots Q6 pd, WCSS pd
>> +  remoteproc's on the Qualcomm IPQ5018, IPQ9574 SoC.
> 
> What is PD? I don't see it defined anywhere.
> 
Pd means protection domain.
It's similar to process in Linux. Here QDSP6 processor runs each wifi 
radio functionality on a separate process. One process can't access 
other process resources, so this is termed as PD i.e protection domain.
Here we have two pd's called root and user pd. We can correlate Root pd
as root and user pd as user in linux. Root pd has more privileges than
user pd.
 From remoteproc driver perspective, root pd corresponds to QDSP6 
processor bring up and user pd corresponds to Wifi radio (WCSS) bring up.

I will try to add this info in cover page.
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - qcom,ipq5018-q6-mpd
>> +      - qcom,ipq9574-q6-mpd
>> +
>> +  '#address-cells': true
> 
> Need to define the size.
> 
>> +
>> +  '#size-cells': true
> 
> ditto
> 
It's not required. I am going to remove it.
>> +
>> +  'ranges': true
> 
> Don't need quotes
> 
It's not required. I am going to remove it.
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts-extended:
> 
> Just 'interrupts'. Both forms are always supported.
> 
Sure, will use 'interrupts'
>> +    items:
>> +      - description: Watchdog interrupt
>> +      - description: Fatal interrupt
>> +      - description: Ready interrupt
>> +      - description: Handover interrupt
>> +      - description: Stop acknowledge interrupt
>> +
>> +  interrupt-names:
>> +    items:
>> +      - const: wdog
>> +      - const: fatal
>> +      - const: ready
>> +      - const: handover
>> +      - const: stop-ack
>> +
>> +  clocks:
>> +    minItems: 25
>> +    maxItems: 25
> 
> You need to list out what the clocks are.
> 
Sure. I will do.
>> +
>> +  clock-names:
>> +    minItems: 25
>> +    maxItems: 25
>> +
>> +  assigned-clocks:
> 
> You can drop this. Implicitly supported.
> 
>> +    minItems: 13
>> +    maxItems: 13
>> +
>> +  assigned-clock-rates:
>> +    minItems: 13
>> +    maxItems: 13
>> +
>> +  qcom,smem-states:
>> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> 
> I believe this already has a type. It should be defined in a common
> schema if not already and then included in this schema.
> 
>> +    description: States used by the AP to signal the remoteprocessor
>> +    items:
>> +      - description: Shutdown Q6
>> +      - description: Stop Q6
>> +
>> +  qcom,smem-state-names:
>> +    description:
>> +      Names of the states used by the AP to signal the remoteprocessor
>> +    items:
>> +      - const: shutdown
>> +      - const: stop
>> +
>> +  memory-region:
>> +    items:
>> +      - description: Q6 pd reserved region
>> +
>> +  glink-edge:
>> +    $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
>> +    description:
>> +      Qualcomm G-Link subnode which represents communication edge, channels
>> +      and devices related to the Modem.
>> +
>> +patternProperties:
>> +  "^remoteproc_pd1|remoteproc_pd2|remoteproc_pd3":
>> +    type: object
>> +    description:
>> +      In Multipd model, WCSS pd depends on Q6 pd i.e Q6 pd should be up before
>> +      WCSS. It can be achieved by keeping wcss pd node as subnode of Q6
>> +      device node.
>> +
>> +    properties:
>> +      compatible:
>> +        enum:
>> +          - "qcom,ipq5018-wcss-ahb-mpd"
> 
> Don't need quotes.
> 
I will remove it.
>> +          - "qcom,ipq9574-wcss-ahb-mpd"
>> +          - "qcom,ipq5018-wcss-pcie-mpd"
>> +
>> +      interrupts-extended:
> 
> Just interrupts
> 
I will use 'interrupts'
>> +        items:
>> +          - description: Fatal interrupt
>> +          - description: Ready interrupt
>> +          - description: Spawn acknowledge interrupt
>> +          - description: Stop acknowledge interrupt
>> +
>> +      interrupt-names:
>> +        items:
>> +          - const: fatal
>> +          - const: ready
>> +          - const: spawn-ack
>> +          - const: stop-ack
>> +
>> +      qcom,smem-states:
>> +        $ref: /schemas/types.yaml#/definitions/phandle-array
>> +        description: States used by the AP to signal the remoteprocessor
>> +        items:
>> +          - description: Shutdown WCSS pd
>> +          - description: Stop WCSS pd
>> +          - description: Spawn WCSS pd
>> +
>> +      qcom,smem-state-names:
>> +        description:
>> +          Names of the states used by the AP to signal the remoteprocessor
>> +        items:
>> +          - const: shutdown
>> +          - const: stop
>> +          - const: spawn
>> +
>> +    required:
>> +      - compatible
>> +
>> +    additionalProperties: false
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupts-extended
>> +  - interrupt-names
>> +  - qcom,smem-states
>> +  - qcom,smem-state-names
>> +  - memory-region
>> +
>> +additionalProperties: false
>> +
>> +allOf:
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          enum:
>> +            - qcom,ipq9574-q6-mpd
>> +    then:
>> +      properties:
>> +        assigned-clocks:
> 
> Don't need to define assigned-clocks
> 
>> +          items:
>> +            - description: Phandle, clock specifier of GCC_ANOC_WCSS_AXI_M_CLK
>> +            - description: Phandle, clock specifier of GCC_WCSS_AHB_S_CLK
>> +            - description: Phandle, clock specifier of GCC_WCSS_ECAHB_CLK
>> +            - description: Phandle, clock specifier of GCC_WCSS_ACMT_CLK
>> +            - description: Phandle, clock specifier of GCC_WCSS_AXI_M_CLK
>> +            - description: Phandle, clock specifier of GCC_Q6_AXIM_CLK
>> +            - description: Phandle, clock specifier of GCC_Q6_AXIM2_CLK
>> +            - description: Phandle, clock specifier of GCC_Q6_AHB_CLK
>> +            - description: Phandle, clock specifier of GCC_Q6_AHB_S_CLK
>> +            - description: Phandle, clock specifier of GCC_Q6SS_BOOT_CLK
>> +            - description: Phandle, clock specifier of GCC_MEM_NOC_Q6_AXI_CLK
>> +            - description: Phandle, clock specifier of GCC_WCSS_Q6_TBU_CLK
>> +            - description: Phandle, clock specifier of GCC_SYS_NOC_WCSS_AHB_CLK
>> +        assigned-clock-rates:
>> +          items:
>> +            - description: Must be 266666667 HZ
>> +            - description: Must be 133333333 HZ
>> +            - description: Must be 133333333 HZ
>> +            - description: Must be 133333333 HZ
>> +            - description: Must be 266666667 HZ
>> +            - description: Must be 533000000 HZ
>> +            - description: Must be 342857143 HZ
>> +            - description: Must be 133333333 HZ
>> +            - description: Must be 133333333 HZ
>> +            - description: Must be 342857143 HZ
>> +            - description: Must be 533000000 HZ
>> +            - description: Must be 533000000 HZ
>> +            - description: Must be 133333333 HZ
>> +
>> +examples:
>> +  - |
>> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +        #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
>> +        #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
>> +
>> +        q6v5_wcss: remoteproc@cd00000 {
>> +                compatible = "qcom,ipq5018-q6-mpd";
>> +                #address-cells = <1>;
>> +                #size-cells = <1>;
>> +                ranges;
>> +                reg = <0x0cd00000 0x4040>;
>> +                interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
>> +                                <&wcss_smp2p_in 0 0>,
>> +                                <&wcss_smp2p_in 1 0>,
>> +                                <&wcss_smp2p_in 2 0>,
>> +                                <&wcss_smp2p_in 3 0>;
>> +                interrupt-names = "wdog",
>> +                                  "fatal",
>> +                                  "ready",
>> +                                  "handover",
>> +                                  "stop-ack";
>> +
>> +                qcom,smem-states = <&wcss_smp2p_out 0>,
>> +                                   <&wcss_smp2p_out 1>;
>> +                qcom,smem-state-names = "shutdown",
>> +                                        "stop";
>> +
>> +                memory-region = <&q6_region>;
>> +
>> +                glink-edge {
>> +                        interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
>> +                        label = "rtr";
>> +                        qcom,remote-pid = <1>;
>> +                        mboxes = <&apcs_glb 8>;
>> +                };
>> +
>> +                q6_wcss_pd1: remoteproc_pd1 {
>> +                        compatible = "qcom,ipq5018-wcss-ahb-mpd";
>> +                        interrupts-extended = <&wcss_smp2p_in 8 0>,
>> +                                        <&wcss_smp2p_in 9 0>,
>> +                                        <&wcss_smp2p_in 12 0>,
>> +                                        <&wcss_smp2p_in 11 0>;
>> +                        interrupt-names = "fatal",
>> +                                          "ready",
>> +                                          "spawn-ack",
>> +                                          "stop-ack";
>> +                        qcom,smem-states = <&wcss_smp2p_out 8>,
>> +                                           <&wcss_smp2p_out 9>,
>> +                                           <&wcss_smp2p_out 10>;
>> +                        qcom,smem-state-names = "shutdown",
>> +                                                "stop",
>> +                                                "spawn";
>> +                };
>> +
>> +                q6_wcss_pd2: remoteproc_pd2 {
>> +                        compatible = "qcom,ipq5018-wcss-pcie-mpd";
>> +                        interrupts-extended = <&wcss_smp2p_in 16 0>,
>> +                                        <&wcss_smp2p_in 17 0>,
>> +                                        <&wcss_smp2p_in 20 0>,
>> +                                        <&wcss_smp2p_in 19 0>;
>> +                        interrupt-names = "fatal",
>> +                                          "ready",
>> +                                          "spawn-ack",
>> +                                          "stop-ack";
>> +
>> +                        qcom,smem-states = <&wcss_smp2p_out 16>,
>> +                                           <&wcss_smp2p_out 17>,
>> +                                           <&wcss_smp2p_out 18>;
>> +                        qcom,smem-state-names = "shutdown",
>> +                                                "stop",
>> +                                                "spawn";
>> +                        status = "okay";
> 
> Don't need status in examples.
> 
I will remove status property.

Thanks & Regards,
Manikanta.
>> +                };
>> +
>> +                q6_wcss_pd3: remoteproc_pd3 {
>> +                        compatible = "qcom,ipq5018-wcss-pcie-mpd";
>> +                        interrupts-extended = <&wcss_smp2p_in 24 0>,
>> +                                        <&wcss_smp2p_in 25 0>,
>> +                                        <&wcss_smp2p_in 28 0>,
>> +                                        <&wcss_smp2p_in 27 0>;
>> +                        interrupt-names = "fatal",
>> +                                          "ready",
>> +                                          "spawn-ack",
>> +                                          "stop-ack";
>> +
>> +                        qcom,smem-states = <&wcss_smp2p_out 24>,
>> +                                           <&wcss_smp2p_out 25>,
>> +                                           <&wcss_smp2p_out 26>;
>> +                        qcom,smem-state-names = "shutdown",
>> +                                                "stop",
>> +                                                "spawn";
>> +                        status = "okay";
>> +                };
>> +        };
>> -- 
>> 2.34.1
>>
Manikanta Mylavarapu May 9, 2023, 10:34 a.m. UTC | #4
On 5/9/2023 12:38 PM, Krzysztof Kozlowski wrote:
> On 08/05/2023 15:45, Manikanta Mylavarapu wrote:
>>
>>
>> On 3/7/2023 8:47 PM, Krzysztof Kozlowski wrote:
>>> On 07/03/2023 05:41, Manikanta Mylavarapu wrote:
>>>> Add new binding document for multipd model remoteproc.
>>>> IPQ5018, IPQ9574 follows multipd model.
>>>>
>>>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
>>>> ---
>>>>    .../bindings/remoteproc/qcom,multipd-pil.yaml | 282 ++++++++++++++++++
>>>>    1 file changed, 282 insertions(+)
>>>>    create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
>>>> new file mode 100644
>>>> index 000000000000..b788607f5abd
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
>>>> @@ -0,0 +1,282 @@
>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/remoteproc/qcom,multipd-pil.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Qualcomm Multipd Secure Peripheral Image Loader
>>>> +
>>>> +maintainers:
>>>> +  - Bjorn Andersson <andersson@kernel.org>
>>>> +  - Mathieu Poirier <mathieu.poirier@linaro.org>
>>>> +
>>>> +description:
>>>> +  Multipd Peripheral Image Loader loads firmware and boots Q6 pd, WCSS pd
>>>> +  remoteproc's on the Qualcomm IPQ5018, IPQ9574 SoC.
>>>
>>> What is a "pd"?
>>>
>> Pd means protection domain.
>> It's similar to process in Linux. Here QDSP6 processor runs each wifi
>> radio functionality on a separate process. One process can't access
>> other process resources, so this is termed as PD i.e protection domain.
>> Here we have two pd's called root and user pd. We can correlate Root pd
>> as root and user pd as user in linux. Root pd has more privileges than
>> user pd.
>>   From remoteproc driver perspective, root pd corresponds to QDSP6
>> processor bring up and user pd corresponds to Wifi radio (WCSS) bring up.
> 
> Parts of it should be in description. And definitely "pd" should be
> explained.
> 
Sure, i will add it in cover page.
>>>> +
>>>> +properties:
>>>> +  compatible:
>>>> +    enum:
>>>> +      - qcom,ipq5018-q6-mpd
>>>> +      - qcom,ipq9574-q6-mpd
>>>> +
>>>> +  '#address-cells': true
>>>> +
>>>> +  '#size-cells': true
> 
> ...
> 
>>>
>> Sure, will add.
>>>> +    description:
>>>> +      Qualcomm G-Link subnode which represents communication edge, channels
>>>> +      and devices related to the Modem.
>>>> +
>>>> +patternProperties:
>>>> +  "^remoteproc_pd1|remoteproc_pd2|remoteproc_pd3":
>>>
>>> No, underscores are not allowed. Also, what is pd?
>>>
>> Sure, will remove underscores.
> 
> Shouldn't this be just pd-1?
> 
> 
I think 'pd-1' not enough. Because child's i.e userpd's also considered
as remote processor's, so name should be like "remoteproc-pd1".
>>>> +    type: object
>>>> +    description:
>>>> +      In Multipd model, WCSS pd depends on Q6 pd i.e Q6 pd should be up before
>>>> +      WCSS. It can be achieved by keeping wcss pd node as subnode of Q6
>>>> +      device node.
>>>> +
>>>> +    properties:
>>>> +      compatible:
>>>> +        enum:
>>>> +          - "qcom,ipq5018-wcss-ahb-mpd"
>>>> +          - "qcom,ipq9574-wcss-ahb-mpd"
>>>> +          - "qcom,ipq5018-wcss-pcie-mpd"
> 
> 
> 
> Best regards,
> Krzysztof
> 

Thanks & Regards,
Manikanta.
Krzysztof Kozlowski May 9, 2023, 1:01 p.m. UTC | #5
On 09/05/2023 12:34, Manikanta Mylavarapu wrote:
>>> Sure, will add.
>>>>> +    description:
>>>>> +      Qualcomm G-Link subnode which represents communication edge, channels
>>>>> +      and devices related to the Modem.
>>>>> +
>>>>> +patternProperties:
>>>>> +  "^remoteproc_pd1|remoteproc_pd2|remoteproc_pd3":
>>>>
>>>> No, underscores are not allowed. Also, what is pd?
>>>>
>>> Sure, will remove underscores.
>>
>> Shouldn't this be just pd-1?
>>
>>
> I think 'pd-1' not enough. Because child's i.e userpd's also considered
> as remote processor's, so name should be like "remoteproc-pd1".

"pd-1" is not enough for what? Why the node name has to be more specific?


Best regards,
Krzysztof
Manikanta Mylavarapu May 9, 2023, 1:23 p.m. UTC | #6
On 5/9/2023 6:31 PM, Krzysztof Kozlowski wrote:
> On 09/05/2023 12:34, Manikanta Mylavarapu wrote:
>>>> Sure, will add.
>>>>>> +    description:
>>>>>> +      Qualcomm G-Link subnode which represents communication edge, channels
>>>>>> +      and devices related to the Modem.
>>>>>> +
>>>>>> +patternProperties:
>>>>>> +  "^remoteproc_pd1|remoteproc_pd2|remoteproc_pd3":
>>>>>
>>>>> No, underscores are not allowed. Also, what is pd?
>>>>>
>>>> Sure, will remove underscores.
>>>
>>> Shouldn't this be just pd-1?
>>>
>>>
>> I think 'pd-1' not enough. Because child's i.e userpd's also considered
>> as remote processor's, so name should be like "remoteproc-pd1".
> 
> "pd-1" is not enough for what? Why the node name has to be more specific?
> 
> 
> Best regards,
> Krzysztof
> 

Sure. "pd-1" also seems fine. I will change child node name to "pd-1".

Thanks & Regards,
Manikanta.
Manikanta Mylavarapu May 9, 2023, 4:17 p.m. UTC | #7
On 3/7/2023 7:56 PM, Rob Herring wrote:
> On Tue, Mar 07, 2023 at 10:11:27AM +0530, Manikanta Mylavarapu wrote:
>> Add new binding document for multipd model remoteproc.
>> IPQ5018, IPQ9574 follows multipd model.
>>
>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
>> ---
>>   .../bindings/remoteproc/qcom,multipd-pil.yaml | 282 ++++++++++++++++++
>>   1 file changed, 282 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
>> new file mode 100644
>> index 000000000000..b788607f5abd
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
>> @@ -0,0 +1,282 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/remoteproc/qcom,multipd-pil.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm Multipd Secure Peripheral Image Loader
>> +
>> +maintainers:
>> +  - Bjorn Andersson <andersson@kernel.org>
>> +  - Mathieu Poirier <mathieu.poirier@linaro.org>
>> +
>> +description:
>> +  Multipd Peripheral Image Loader loads firmware and boots Q6 pd, WCSS pd
>> +  remoteproc's on the Qualcomm IPQ5018, IPQ9574 SoC.
> 
> What is PD? I don't see it defined anywhere.
> 
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - qcom,ipq5018-q6-mpd
>> +      - qcom,ipq9574-q6-mpd
>> +
>> +  '#address-cells': true
> 
> Need to define the size.
> 
>> +
>> +  '#size-cells': true
> 
> ditto
> 
>> +
>> +  'ranges': true
> 
> Don't need quotes
> 
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts-extended:
> 
> Just 'interrupts'. Both forms are always supported.
> 
>> +    items:
>> +      - description: Watchdog interrupt
>> +      - description: Fatal interrupt
>> +      - description: Ready interrupt
>> +      - description: Handover interrupt
>> +      - description: Stop acknowledge interrupt
>> +
>> +  interrupt-names:
>> +    items:
>> +      - const: wdog
>> +      - const: fatal
>> +      - const: ready
>> +      - const: handover
>> +      - const: stop-ack
>> +
>> +  clocks:
>> +    minItems: 25
>> +    maxItems: 25
> 
> You need to list out what the clocks are.
> 
>> +
>> +  clock-names:
>> +    minItems: 25
>> +    maxItems: 25
>> +
>> +  assigned-clocks:
> 
> You can drop this. Implicitly supported.
>
Clocks in multipd architecture will be handled by QDSP6 firmware.
So i am going to remove clock handling.

>> +    minItems: 13
>> +    maxItems: 13
>> +
>> +  assigned-clock-rates:
>> +    minItems: 13
>> +    maxItems: 13
>> +
>> +  qcom,smem-states:
>> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> 
> I believe this already has a type. It should be defined in a common
> schema if not already and then included in this schema.
> 
>> +    description: States used by the AP to signal the remoteprocessor
>> +    items:
>> +      - description: Shutdown Q6
>> +      - description: Stop Q6
>> +
>> +  qcom,smem-state-names:
>> +    description:
>> +      Names of the states used by the AP to signal the remoteprocessor
>> +    items:
>> +      - const: shutdown
>> +      - const: stop
>> +
>> +  memory-region:
>> +    items:
>> +      - description: Q6 pd reserved region
>> +
>> +  glink-edge:
>> +    $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
>> +    description:
>> +      Qualcomm G-Link subnode which represents communication edge, channels
>> +      and devices related to the Modem.
>> +
>> +patternProperties:
>> +  "^remoteproc_pd1|remoteproc_pd2|remoteproc_pd3":
>> +    type: object
>> +    description:
>> +      In Multipd model, WCSS pd depends on Q6 pd i.e Q6 pd should be up before
>> +      WCSS. It can be achieved by keeping wcss pd node as subnode of Q6
>> +      device node.
>> +
>> +    properties:
>> +      compatible:
>> +        enum:
>> +          - "qcom,ipq5018-wcss-ahb-mpd"
> 
> Don't need quotes.
> 
>> +          - "qcom,ipq9574-wcss-ahb-mpd"
>> +          - "qcom,ipq5018-wcss-pcie-mpd"
>> +
>> +      interrupts-extended:
> 
> Just interrupts
> 
>> +        items:
>> +          - description: Fatal interrupt
>> +          - description: Ready interrupt
>> +          - description: Spawn acknowledge interrupt
>> +          - description: Stop acknowledge interrupt
>> +
>> +      interrupt-names:
>> +        items:
>> +          - const: fatal
>> +          - const: ready
>> +          - const: spawn-ack
>> +          - const: stop-ack
>> +
>> +      qcom,smem-states:
>> +        $ref: /schemas/types.yaml#/definitions/phandle-array
>> +        description: States used by the AP to signal the remoteprocessor
>> +        items:
>> +          - description: Shutdown WCSS pd
>> +          - description: Stop WCSS pd
>> +          - description: Spawn WCSS pd
>> +
>> +      qcom,smem-state-names:
>> +        description:
>> +          Names of the states used by the AP to signal the remoteprocessor
>> +        items:
>> +          - const: shutdown
>> +          - const: stop
>> +          - const: spawn
>> +
>> +    required:
>> +      - compatible
>> +
>> +    additionalProperties: false
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupts-extended
>> +  - interrupt-names
>> +  - qcom,smem-states
>> +  - qcom,smem-state-names
>> +  - memory-region
>> +
>> +additionalProperties: false
>> +
>> +allOf:
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          enum:
>> +            - qcom,ipq9574-q6-mpd
>> +    then:
>> +      properties:
>> +        assigned-clocks:
> 
> Don't need to define assigned-clocks
> 
Clocks in multipd architecture will be handled by QDSP6 firmware.
So i am going to remove clock handling.
>> +          items:
>> +            - description: Phandle, clock specifier of GCC_ANOC_WCSS_AXI_M_CLK
>> +            - description: Phandle, clock specifier of GCC_WCSS_AHB_S_CLK
>> +            - description: Phandle, clock specifier of GCC_WCSS_ECAHB_CLK
>> +            - description: Phandle, clock specifier of GCC_WCSS_ACMT_CLK
>> +            - description: Phandle, clock specifier of GCC_WCSS_AXI_M_CLK
>> +            - description: Phandle, clock specifier of GCC_Q6_AXIM_CLK
>> +            - description: Phandle, clock specifier of GCC_Q6_AXIM2_CLK
>> +            - description: Phandle, clock specifier of GCC_Q6_AHB_CLK
>> +            - description: Phandle, clock specifier of GCC_Q6_AHB_S_CLK
>> +            - description: Phandle, clock specifier of GCC_Q6SS_BOOT_CLK
>> +            - description: Phandle, clock specifier of GCC_MEM_NOC_Q6_AXI_CLK
>> +            - description: Phandle, clock specifier of GCC_WCSS_Q6_TBU_CLK
>> +            - description: Phandle, clock specifier of GCC_SYS_NOC_WCSS_AHB_CLK
>> +        assigned-clock-rates:
>> +          items:
>> +            - description: Must be 266666667 HZ
>> +            - description: Must be 133333333 HZ
>> +            - description: Must be 133333333 HZ
>> +            - description: Must be 133333333 HZ
>> +            - description: Must be 266666667 HZ
>> +            - description: Must be 533000000 HZ
>> +            - description: Must be 342857143 HZ
>> +            - description: Must be 133333333 HZ
>> +            - description: Must be 133333333 HZ
>> +            - description: Must be 342857143 HZ
>> +            - description: Must be 533000000 HZ
>> +            - description: Must be 533000000 HZ
>> +            - description: Must be 133333333 HZ
>> +
>> +examples:
>> +  - |
>> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +        #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
>> +        #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
>> +
>> +        q6v5_wcss: remoteproc@cd00000 {
>> +                compatible = "qcom,ipq5018-q6-mpd";
>> +                #address-cells = <1>;
>> +                #size-cells = <1>;
>> +                ranges;
>> +                reg = <0x0cd00000 0x4040>;
>> +                interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
>> +                                <&wcss_smp2p_in 0 0>,
>> +                                <&wcss_smp2p_in 1 0>,
>> +                                <&wcss_smp2p_in 2 0>,
>> +                                <&wcss_smp2p_in 3 0>;
>> +                interrupt-names = "wdog",
>> +                                  "fatal",
>> +                                  "ready",
>> +                                  "handover",
>> +                                  "stop-ack";
>> +
>> +                qcom,smem-states = <&wcss_smp2p_out 0>,
>> +                                   <&wcss_smp2p_out 1>;
>> +                qcom,smem-state-names = "shutdown",
>> +                                        "stop";
>> +
>> +                memory-region = <&q6_region>;
>> +
>> +                glink-edge {
>> +                        interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
>> +                        label = "rtr";
>> +                        qcom,remote-pid = <1>;
>> +                        mboxes = <&apcs_glb 8>;
>> +                };
>> +
>> +                q6_wcss_pd1: remoteproc_pd1 {
>> +                        compatible = "qcom,ipq5018-wcss-ahb-mpd";
>> +                        interrupts-extended = <&wcss_smp2p_in 8 0>,
>> +                                        <&wcss_smp2p_in 9 0>,
>> +                                        <&wcss_smp2p_in 12 0>,
>> +                                        <&wcss_smp2p_in 11 0>;
>> +                        interrupt-names = "fatal",
>> +                                          "ready",
>> +                                          "spawn-ack",
>> +                                          "stop-ack";
>> +                        qcom,smem-states = <&wcss_smp2p_out 8>,
>> +                                           <&wcss_smp2p_out 9>,
>> +                                           <&wcss_smp2p_out 10>;
>> +                        qcom,smem-state-names = "shutdown",
>> +                                                "stop",
>> +                                                "spawn";
>> +                };
>> +
>> +                q6_wcss_pd2: remoteproc_pd2 {
>> +                        compatible = "qcom,ipq5018-wcss-pcie-mpd";
>> +                        interrupts-extended = <&wcss_smp2p_in 16 0>,
>> +                                        <&wcss_smp2p_in 17 0>,
>> +                                        <&wcss_smp2p_in 20 0>,
>> +                                        <&wcss_smp2p_in 19 0>;
>> +                        interrupt-names = "fatal",
>> +                                          "ready",
>> +                                          "spawn-ack",
>> +                                          "stop-ack";
>> +
>> +                        qcom,smem-states = <&wcss_smp2p_out 16>,
>> +                                           <&wcss_smp2p_out 17>,
>> +                                           <&wcss_smp2p_out 18>;
>> +                        qcom,smem-state-names = "shutdown",
>> +                                                "stop",
>> +                                                "spawn";
>> +                        status = "okay";
> 
> Don't need status in examples.
> 
>> +                };
>> +
>> +                q6_wcss_pd3: remoteproc_pd3 {
>> +                        compatible = "qcom,ipq5018-wcss-pcie-mpd";
>> +                        interrupts-extended = <&wcss_smp2p_in 24 0>,
>> +                                        <&wcss_smp2p_in 25 0>,
>> +                                        <&wcss_smp2p_in 28 0>,
>> +                                        <&wcss_smp2p_in 27 0>;
>> +                        interrupt-names = "fatal",
>> +                                          "ready",
>> +                                          "spawn-ack",
>> +                                          "stop-ack";
>> +
>> +                        qcom,smem-states = <&wcss_smp2p_out 24>,
>> +                                           <&wcss_smp2p_out 25>,
>> +                                           <&wcss_smp2p_out 26>;
>> +                        qcom,smem-state-names = "shutdown",
>> +                                                "stop",
>> +                                                "spawn";
>> +                        status = "okay";
>> +                };
>> +        };
>> -- 
>> 2.34.1
>>

Thanks & Regards,
Manikanta.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
new file mode 100644
index 000000000000..b788607f5abd
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
@@ -0,0 +1,282 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,multipd-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Multipd Secure Peripheral Image Loader
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+
+description:
+  Multipd Peripheral Image Loader loads firmware and boots Q6 pd, WCSS pd
+  remoteproc's on the Qualcomm IPQ5018, IPQ9574 SoC.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq5018-q6-mpd
+      - qcom,ipq9574-q6-mpd
+
+  '#address-cells': true
+
+  '#size-cells': true
+
+  'ranges': true
+
+  reg:
+    maxItems: 1
+
+  interrupts-extended:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+
+  clocks:
+    minItems: 25
+    maxItems: 25
+
+  clock-names:
+    minItems: 25
+    maxItems: 25
+
+  assigned-clocks:
+    minItems: 13
+    maxItems: 13
+
+  assigned-clock-rates:
+    minItems: 13
+    maxItems: 13
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the remoteprocessor
+    items:
+      - description: Shutdown Q6
+      - description: Stop Q6
+
+  qcom,smem-state-names:
+    description:
+      Names of the states used by the AP to signal the remoteprocessor
+    items:
+      - const: shutdown
+      - const: stop
+
+  memory-region:
+    items:
+      - description: Q6 pd reserved region
+
+  glink-edge:
+    $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the Modem.
+
+patternProperties:
+  "^remoteproc_pd1|remoteproc_pd2|remoteproc_pd3":
+    type: object
+    description:
+      In Multipd model, WCSS pd depends on Q6 pd i.e Q6 pd should be up before
+      WCSS. It can be achieved by keeping wcss pd node as subnode of Q6
+      device node.
+
+    properties:
+      compatible:
+        enum:
+          - "qcom,ipq5018-wcss-ahb-mpd"
+          - "qcom,ipq9574-wcss-ahb-mpd"
+          - "qcom,ipq5018-wcss-pcie-mpd"
+
+      interrupts-extended:
+        items:
+          - description: Fatal interrupt
+          - description: Ready interrupt
+          - description: Spawn acknowledge interrupt
+          - description: Stop acknowledge interrupt
+
+      interrupt-names:
+        items:
+          - const: fatal
+          - const: ready
+          - const: spawn-ack
+          - const: stop-ack
+
+      qcom,smem-states:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        description: States used by the AP to signal the remoteprocessor
+        items:
+          - description: Shutdown WCSS pd
+          - description: Stop WCSS pd
+          - description: Spawn WCSS pd
+
+      qcom,smem-state-names:
+        description:
+          Names of the states used by the AP to signal the remoteprocessor
+        items:
+          - const: shutdown
+          - const: stop
+          - const: spawn
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts-extended
+  - interrupt-names
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - memory-region
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,ipq9574-q6-mpd
+    then:
+      properties:
+        assigned-clocks:
+          items:
+            - description: Phandle, clock specifier of GCC_ANOC_WCSS_AXI_M_CLK
+            - description: Phandle, clock specifier of GCC_WCSS_AHB_S_CLK
+            - description: Phandle, clock specifier of GCC_WCSS_ECAHB_CLK
+            - description: Phandle, clock specifier of GCC_WCSS_ACMT_CLK
+            - description: Phandle, clock specifier of GCC_WCSS_AXI_M_CLK
+            - description: Phandle, clock specifier of GCC_Q6_AXIM_CLK
+            - description: Phandle, clock specifier of GCC_Q6_AXIM2_CLK
+            - description: Phandle, clock specifier of GCC_Q6_AHB_CLK
+            - description: Phandle, clock specifier of GCC_Q6_AHB_S_CLK
+            - description: Phandle, clock specifier of GCC_Q6SS_BOOT_CLK
+            - description: Phandle, clock specifier of GCC_MEM_NOC_Q6_AXI_CLK
+            - description: Phandle, clock specifier of GCC_WCSS_Q6_TBU_CLK
+            - description: Phandle, clock specifier of GCC_SYS_NOC_WCSS_AHB_CLK
+        assigned-clock-rates:
+          items:
+            - description: Must be 266666667 HZ
+            - description: Must be 133333333 HZ
+            - description: Must be 133333333 HZ
+            - description: Must be 133333333 HZ
+            - description: Must be 266666667 HZ
+            - description: Must be 533000000 HZ
+            - description: Must be 342857143 HZ
+            - description: Must be 133333333 HZ
+            - description: Must be 133333333 HZ
+            - description: Must be 342857143 HZ
+            - description: Must be 533000000 HZ
+            - description: Must be 533000000 HZ
+            - description: Must be 133333333 HZ
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
+        #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
+
+        q6v5_wcss: remoteproc@cd00000 {
+                compatible = "qcom,ipq5018-q6-mpd";
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges;
+                reg = <0x0cd00000 0x4040>;
+                interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
+                                <&wcss_smp2p_in 0 0>,
+                                <&wcss_smp2p_in 1 0>,
+                                <&wcss_smp2p_in 2 0>,
+                                <&wcss_smp2p_in 3 0>;
+                interrupt-names = "wdog",
+                                  "fatal",
+                                  "ready",
+                                  "handover",
+                                  "stop-ack";
+
+                qcom,smem-states = <&wcss_smp2p_out 0>,
+                                   <&wcss_smp2p_out 1>;
+                qcom,smem-state-names = "shutdown",
+                                        "stop";
+
+                memory-region = <&q6_region>;
+
+                glink-edge {
+                        interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+                        label = "rtr";
+                        qcom,remote-pid = <1>;
+                        mboxes = <&apcs_glb 8>;
+                };
+
+                q6_wcss_pd1: remoteproc_pd1 {
+                        compatible = "qcom,ipq5018-wcss-ahb-mpd";
+                        interrupts-extended = <&wcss_smp2p_in 8 0>,
+                                        <&wcss_smp2p_in 9 0>,
+                                        <&wcss_smp2p_in 12 0>,
+                                        <&wcss_smp2p_in 11 0>;
+                        interrupt-names = "fatal",
+                                          "ready",
+                                          "spawn-ack",
+                                          "stop-ack";
+                        qcom,smem-states = <&wcss_smp2p_out 8>,
+                                           <&wcss_smp2p_out 9>,
+                                           <&wcss_smp2p_out 10>;
+                        qcom,smem-state-names = "shutdown",
+                                                "stop",
+                                                "spawn";
+                };
+
+                q6_wcss_pd2: remoteproc_pd2 {
+                        compatible = "qcom,ipq5018-wcss-pcie-mpd";
+                        interrupts-extended = <&wcss_smp2p_in 16 0>,
+                                        <&wcss_smp2p_in 17 0>,
+                                        <&wcss_smp2p_in 20 0>,
+                                        <&wcss_smp2p_in 19 0>;
+                        interrupt-names = "fatal",
+                                          "ready",
+                                          "spawn-ack",
+                                          "stop-ack";
+
+                        qcom,smem-states = <&wcss_smp2p_out 16>,
+                                           <&wcss_smp2p_out 17>,
+                                           <&wcss_smp2p_out 18>;
+                        qcom,smem-state-names = "shutdown",
+                                                "stop",
+                                                "spawn";
+                        status = "okay";
+                };
+
+                q6_wcss_pd3: remoteproc_pd3 {
+                        compatible = "qcom,ipq5018-wcss-pcie-mpd";
+                        interrupts-extended = <&wcss_smp2p_in 24 0>,
+                                        <&wcss_smp2p_in 25 0>,
+                                        <&wcss_smp2p_in 28 0>,
+                                        <&wcss_smp2p_in 27 0>;
+                        interrupt-names = "fatal",
+                                          "ready",
+                                          "spawn-ack",
+                                          "stop-ack";
+
+                        qcom,smem-states = <&wcss_smp2p_out 24>,
+                                           <&wcss_smp2p_out 25>,
+                                           <&wcss_smp2p_out 26>;
+                        qcom,smem-state-names = "shutdown",
+                                                "stop",
+                                                "spawn";
+                        status = "okay";
+                };
+        };