@@ -10,6 +10,7 @@
#include <linux/clk.h>
#include <linux/crc8.h>
+#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/interconnect.h>
@@ -62,6 +63,13 @@
#define AXI_MSTR_RESP_COMP_CTRL1 0x81c
#define MISC_CONTROL_1_REG 0x8bc
+/* MHI registers */
+#define PARF_DEBUG_CNT_PM_LINKST_IN_L2 0xc04
+#define PARF_DEBUG_CNT_PM_LINKST_IN_L1 0xc0c
+#define PARF_DEBUG_CNT_PM_LINKST_IN_L0S 0xc10
+#define PARF_DEBUG_CNT_AUX_CLK_IN_L1SUB_L1 0xc84
+#define PARF_DEBUG_CNT_AUX_CLK_IN_L1SUB_L2 0xc88
+
/* PARF_SYS_CTRL register fields */
#define MAC_PHY_POWERDOWN_IN_P2_D_MUX_EN BIT(29)
#define MST_WAKEUP_EN BIT(13)
@@ -219,6 +227,7 @@ struct qcom_pcie_ops {
void (*deinit)(struct qcom_pcie *pcie);
void (*ltssm_enable)(struct qcom_pcie *pcie);
int (*config_sid)(struct qcom_pcie *pcie);
+ void (*init_debugfs)(struct qcom_pcie *pcie);
};
struct qcom_pcie_cfg {
@@ -229,11 +238,13 @@ struct qcom_pcie {
struct dw_pcie *pci;
void __iomem *parf; /* DT parf */
void __iomem *elbi; /* DT elbi */
+ void __iomem *mhi;
union qcom_pcie_resources res;
struct phy *phy;
struct gpio_desc *reset;
struct icc_path *icc_mem;
const struct qcom_pcie_cfg *cfg;
+ struct dentry *debugfs;
};
#define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
@@ -263,6 +274,23 @@ static int qcom_pcie_start_link(struct dw_pcie *pci)
return 0;
}
+static void qcom_pcie_init_debugfs(struct qcom_pcie *pcie,
+ int (*debugfs_func)(struct seq_file *s, void *data))
+{
+ struct dw_pcie *pci = pcie->pci;
+ struct device *dev = pci->dev;
+ char *name;
+
+ name = devm_kasprintf(dev, GFP_KERNEL, "%pOFP", dev->of_node);
+ if (!name)
+ return;
+
+ pcie->debugfs = debugfs_create_dir(name, NULL);
+
+ debugfs_create_devm_seqfile(pci->dev, "link_transition_count",
+ pcie->debugfs, debugfs_func);
+}
+
static void qcom_pcie_2_1_0_ltssm_enable(struct qcom_pcie *pcie)
{
u32 val;
@@ -963,6 +991,35 @@ static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
}
+static int qcom_pcie_debugfs_func_2_7_0(struct seq_file *s, void *data)
+{
+ struct qcom_pcie *pcie = (struct qcom_pcie *) dev_get_drvdata(s->private);
+
+ seq_printf(s, "L0s transition count: %u\n",
+ readl_relaxed(pcie->mhi + PARF_DEBUG_CNT_PM_LINKST_IN_L0S));
+
+ seq_printf(s, "L1 transition count: %u\n",
+ readl_relaxed(pcie->mhi + PARF_DEBUG_CNT_PM_LINKST_IN_L1));
+
+ seq_printf(s, "L1.1 transition count: %u\n",
+ readl_relaxed(pcie->mhi + PARF_DEBUG_CNT_AUX_CLK_IN_L1SUB_L1));
+
+ seq_printf(s, "L1.2 transition count: %u\n",
+ readl_relaxed(pcie->mhi + PARF_DEBUG_CNT_AUX_CLK_IN_L1SUB_L2));
+
+ seq_printf(s, "L2 transition count: %u\n",
+ readl_relaxed(pcie->mhi + PARF_DEBUG_CNT_PM_LINKST_IN_L2));
+
+ return 0;
+}
+
+
+static void qcom_pcie_init_debugfs_2_7_0(struct qcom_pcie *pcie)
+{
+ if (pcie->mhi)
+ qcom_pcie_init_debugfs(pcie, qcom_pcie_debugfs_func_2_7_0);
+}
+
static int qcom_pcie_config_sid_1_9_0(struct qcom_pcie *pcie)
{
/* iommu map structure */
@@ -1260,6 +1317,7 @@ static const struct qcom_pcie_ops ops_2_7_0 = {
.init = qcom_pcie_init_2_7_0,
.deinit = qcom_pcie_deinit_2_7_0,
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
+ .init_debugfs = qcom_pcie_init_debugfs_2_7_0,
};
/* Qcom IP rev.: 1.9.0 */
@@ -1269,6 +1327,7 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
.deinit = qcom_pcie_deinit_2_7_0,
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
.config_sid = qcom_pcie_config_sid_1_9_0,
+ .init_debugfs = qcom_pcie_init_debugfs_2_7_0,
};
/* Qcom IP rev.: 2.9.0 Synopsys IP rev.: 5.00a */
@@ -1387,11 +1446,12 @@ static void qcom_pcie_icc_update(struct qcom_pcie *pcie)
static int qcom_pcie_probe(struct platform_device *pdev)
{
+ const struct qcom_pcie_cfg *pcie_cfg;
struct device *dev = &pdev->dev;
+ struct qcom_pcie *pcie;
struct dw_pcie_rp *pp;
+ struct resource *res;
struct dw_pcie *pci;
- struct qcom_pcie *pcie;
- const struct qcom_pcie_cfg *pcie_cfg;
int ret;
pcie_cfg = of_device_get_match_data(dev);
@@ -1439,6 +1499,16 @@ static int qcom_pcie_probe(struct platform_device *pdev)
goto err_pm_runtime_put;
}
+ /* MHI region is optional */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mhi");
+ if (res) {
+ pcie->mhi = devm_ioremap_resource(dev, res);
+ if (IS_ERR(pcie->mhi)) {
+ ret = PTR_ERR(pcie->mhi);
+ goto err_pm_runtime_put;
+ }
+ }
+
pcie->phy = devm_phy_optional_get(dev, "pciephy");
if (IS_ERR(pcie->phy)) {
ret = PTR_ERR(pcie->phy);
@@ -1469,6 +1539,9 @@ static int qcom_pcie_probe(struct platform_device *pdev)
qcom_pcie_icc_update(pcie);
+ if (pcie->cfg->ops->init_debugfs)
+ pcie->cfg->ops->init_debugfs(pcie);
+
return 0;
err_phy_exit:
Qualcomm PCIe controllers of versions v1.9.0 and v2.7.0 have debug registers in the MHI region that count PCIe link transitions. Expose them over debugfs to userspace to help debug the low power issues. Note that even though the registers are prefixed as PARF_, they don't live under the "parf" register region. The register naming is following the Qualcomm's internal documentation as like other registers. The debugfs interface is added using per config callback because the register interface for accessing debug info varies between IP versions. While at it, let's arrange the local variables in probe function to follow reverse XMAS tree order. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- drivers/pci/controller/dwc/pcie-qcom.c | 77 +++++++++++++++++++++++++- 1 file changed, 75 insertions(+), 2 deletions(-)