@@ -59,6 +59,8 @@ static inline s64 div_frac(s64 x, s64 y)
* governor switches on when this trip point is crossed.
* If the thermal zone only has one passive trip point,
* @trip_switch_on should be INVALID_TRIP.
+ * @last_switch_on_temp:Record the last switch_on_temp only when trips
+ are writable.
* @trip_max_desired_temperature: last passive trip point of the thermal
* zone. The temperature we are
* controlling for.
@@ -70,6 +72,9 @@ struct power_allocator_params {
s64 err_integral;
s32 prev_err;
int trip_switch_on;
+#ifdef CONFIG_THERMAL_WRITABLE_TRIPS
+ int last_switch_on_temp;
+#endif
int trip_max_desired_temperature;
u32 sustainable_power;
};
@@ -554,6 +559,25 @@ static void get_governor_trips(struct thermal_zone_device *tz,
}
}
+#ifdef CONFIG_THERMAL_WRITABLE_TRIPS
+static bool thermal_cdev_needs_update(struct thermal_zone_device *tz, int switch_on_temp)
+{
+ bool update;
+ struct power_allocator_params *params = tz->governor_data;
+ int last_switch_on_temp = params->last_switch_on_temp;
+
+ update = (tz->last_temperature >= last_switch_on_temp);
+ params->last_switch_on_temp = switch_on_temp;
+
+ return update;
+}
+#else
+static inline bool thermal_cdev_needs_update(struct thermal_zone_device *tz, int switch_on_temp)
+{
+ return false;
+}
+#endif
+
static void reset_pid_controller(struct power_allocator_params *params)
{
params->err_integral = 0;
@@ -709,12 +733,15 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip_id)
return 0;
ret = __thermal_zone_get_trip(tz, params->trip_switch_on, &trip);
- if (!ret && (tz->temperature < trip.temperature)) {
- update = (tz->last_temperature >= trip.temperature);
- tz->passive = 0;
- reset_pid_controller(params);
- allow_maximum_power(tz, update);
- return 0;
+ if (!ret) {
+ update = thermal_cdev_needs_update(tz, trip.temperature);
+ if (tz->temperature < trip.temperature) {
+ update |= (tz->last_temperature >= trip.temperature);
+ tz->passive = 0;
+ reset_pid_controller(params);
+ allow_maximum_power(tz, update);
+ return 0;
+ }
}
tz->passive = 1;
Commit <0952177f2a1f>(thermal/core/power_allocator: Update once cooling devices when temp is low) adds a update flag to avoid the thermal event is triggered when there is no need, and thermal cdev would be update once when temperature is low. But when the trips are writable, and switch_on_temp is set to be a higher value, the cooling device state may not be reset to 0, because last_temperature is smaller than the switch_on_temp. For example: First: swicth_on_temp=70 control_temp=85; Then userspace change the trip_temp: swicth_on_temp=45 control_temp=55 cur_temp=54 Then userspace reset the trip_temp: swicth_on_temp=70 control_temp=85 cur_temp=57 last_temp=54 At this time, the cooling device state should be reset to 0. However, because cur_temp(57) < switch_on_temp(70) last_temp(54) < swicth_on_temp(70) ----> update = false, update is false, the cooling device state can not be reset. This patch adds a function thermal_cdev_needs_update() to renew the update flag value only when the trips are writable, so that thermal cdev->state can be reset after switch_on_temp changed from low to high. Signed-off-by: Di Shen <di.shen@unisoc.com> --- drivers/thermal/gov_power_allocator.c | 39 ++++++++++++++++++++++----- 1 file changed, 33 insertions(+), 6 deletions(-)