diff mbox series

[v3,1/3] media: dt-bindings: media: rkisp1: complete ov2685 example

Message ID 20230129-ov2685-improvements-v3-1-d9737d0707f6@z3ntu.xyz
State Superseded
Headers show
Series Improvements for OmniVision OV2685 | expand

Commit Message

Luca Weiss March 21, 2023, 6:03 p.m. UTC
With the upcoming conversion of ov2685 to dt-schema let's complete the
example so validation succeeds. At the same time fix the indentation of
the port node in this example.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 .../devicetree/bindings/media/rockchip-isp1.yaml      | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

Comments

Krzysztof Kozlowski March 22, 2023, 7:34 a.m. UTC | #1
On 21/03/2023 19:03, Luca Weiss wrote:
> With the upcoming conversion of ov2685 to dt-schema let's complete the
> example so validation succeeds. At the same time fix the indentation of
> the port node in this example.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
>  .../devicetree/bindings/media/rockchip-isp1.yaml      | 19 +++++++++++++------


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
index b3661d7d43572..0bad7e6401486 100644
--- a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
@@ -212,12 +212,19 @@  examples:
                 compatible = "ovti,ov2685";
                 reg = <0x3c>;
 
-                  port {
-                      ucam_out: endpoint {
-                          remote-endpoint = <&mipi_in_ucam>;
-                          data-lanes = <1>;
-                      };
-                  };
+                clocks = <&cru SCLK_TESTCLKOUT1>;
+                clock-names = "xvclk";
+
+                avdd-supply = <&pp2800_cam>;
+                dovdd-supply = <&pp1800>;
+                dvdd-supply = <&pp1800>;
+
+                port {
+                    ucam_out: endpoint {
+                        remote-endpoint = <&mipi_in_ucam>;
+                        data-lanes = <1>;
+                    };
+                };
             };
         };
     };