| Message ID | 1461672525-11516-1-git-send-email-bala.manoharan@linaro.org |
|---|---|
| State | Accepted |
| Commit | 627d963535ece15058324e6f88eb02bf5abf49dc |
| Headers | show |
Merged, Maxim. On 04/26/16 15:25, Savolainen, Petri (Nokia - FI/Espoo) wrote: > Both patches: > > Reviewed-by: Petri Savolainen <petri.savolainen@nokia.com> > > >> -----Original Message----- >> From: EXT Balasubramanian Manoharan [mailto:bala.manoharan@linaro.org] >> Sent: Tuesday, April 26, 2016 3:09 PM >> To: lng-odp@lists.linaro.org >> Cc: Savolainen, Petri (Nokia - FI/Espoo) <petri.savolainen@nokia.com>; >> Balasubramanian Manoharan <bala.manoharan@linaro.org> >> Subject: [PATCH API-NEXTv2 1/2] api: pktio: Adds interface loopback mode >> >> Adds loopback interface mode as a configurable parameter in pktio >> configuration parameter. Support for loopback is an optional feature and >> should be checked in the interface capability before enabling the same. >> >> Signed-off-by: Balasubramanian Manoharan <bala.manoharan@linaro.org> >> --- >> v2: Incorporates review comments from Petri >> include/odp/api/spec/packet_io.h | 14 ++++++++++++++ >> 1 file changed, 14 insertions(+) >> >> diff --git a/include/odp/api/spec/packet_io.h >> b/include/odp/api/spec/packet_io.h >> index 7c29176..1899a4f 100644 >> --- a/include/odp/api/spec/packet_io.h >> +++ b/include/odp/api/spec/packet_io.h >> @@ -362,6 +362,14 @@ typedef struct odp_pktio_config_t { >> * Default value for all bits is zero. */ >> odp_pktout_config_opt_t pktout; >> >> + /** Interface loopback mode >> + * >> + * In this mode the packets sent out through the interface is >> + * looped back to input of the same interface. Supporting loopback >> mode >> + * is an optional feature per interface and should be queried in the >> + * interface capability before enabling the same. */ >> + odp_bool_t enable_loop; >> + >> } odp_pktio_config_t; >> >> /** >> @@ -399,6 +407,12 @@ typedef struct odp_pktio_capability_t { >> * A bit set to one indicates a supported operation. All other bits >> are >> * set to zero. */ >> odp_pktio_set_op_t set_op; >> + >> + /** Support of Loopback mode >> + * >> + * A boolean to denote whether loop back mode is supported on this >> + * specific interface. */ >> + odp_bool_t loop_supported; >> } odp_pktio_capability_t; >> >> /** >> -- >> 1.9.1 > _______________________________________________ > lng-odp mailing list > lng-odp@lists.linaro.org > https://lists.linaro.org/mailman/listinfo/lng-odp
diff --git a/include/odp/api/spec/packet_io.h b/include/odp/api/spec/packet_io.h index 7c29176..1899a4f 100644 --- a/include/odp/api/spec/packet_io.h +++ b/include/odp/api/spec/packet_io.h @@ -362,6 +362,14 @@ typedef struct odp_pktio_config_t { * Default value for all bits is zero. */ odp_pktout_config_opt_t pktout; + /** Interface loopback mode + * + * In this mode the packets sent out through the interface is + * looped back to input of the same interface. Supporting loopback mode + * is an optional feature per interface and should be queried in the + * interface capability before enabling the same. */ + odp_bool_t enable_loop; + } odp_pktio_config_t; /** @@ -399,6 +407,12 @@ typedef struct odp_pktio_capability_t { * A bit set to one indicates a supported operation. All other bits are * set to zero. */ odp_pktio_set_op_t set_op; + + /** Support of Loopback mode + * + * A boolean to denote whether loop back mode is supported on this + * specific interface. */ + odp_bool_t loop_supported; } odp_pktio_capability_t; /**
Adds loopback interface mode as a configurable parameter in pktio configuration parameter. Support for loopback is an optional feature and should be checked in the interface capability before enabling the same. Signed-off-by: Balasubramanian Manoharan <bala.manoharan@linaro.org> --- v2: Incorporates review comments from Petri include/odp/api/spec/packet_io.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+)