diff mbox series

[5/6] dt-bindings: display: visionox,rm69299: document reg

Message ID 20230326155425.91181-5-krzysztof.kozlowski@linaro.org
State Accepted
Commit 5ffd1f3f9a8e44ed816817bb5b0193cc64c9dba1
Headers show
Series [1/6] dt-bindings: display: panel-simple: merge Innolux p120zdg-bf1 | expand

Commit Message

Krzysztof Kozlowski March 26, 2023, 3:54 p.m. UTC
Panels are supposed to have one reg.  This fixes dtbs_check warnings
like:

  sc7180-idp.dtb: panel@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../display/panel/visionox,rm69299.yaml       | 25 +++++++++++++------
 1 file changed, 17 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
index 481ef051df1e..444ac2a4772d 100644
--- a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
+++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
@@ -19,6 +19,8 @@  properties:
   compatible:
     const: visionox,rm69299-1080p-display
 
+  reg: true
+
   vdda-supply:
     description: |
       Phandle of the regulator that provides the vdda supply voltage.
@@ -34,6 +36,7 @@  additionalProperties: false
 
 required:
   - compatible
+  - reg
   - vdda-supply
   - vdd3p3-supply
   - reset-gpios
@@ -41,16 +44,22 @@  required:
 
 examples:
   - |
-    panel {
-        compatible = "visionox,rm69299-1080p-display";
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "visionox,rm69299-1080p-display";
+            reg = <0>;
 
-        vdda-supply = <&src_pp1800_l8c>;
-        vdd3p3-supply = <&src_pp2800_l18a>;
+            vdda-supply = <&src_pp1800_l8c>;
+            vdd3p3-supply = <&src_pp2800_l18a>;
 
-        reset-gpios = <&pm6150l_gpio 3 0>;
-        port {
-            panel0_in: endpoint {
-                remote-endpoint = <&dsi0_out>;
+            reset-gpios = <&pm6150l_gpio 3 0>;
+            port {
+                panel0_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
             };
         };
     };