diff mbox series

[v2,4/4] spi: s3c64xx: support interrupt based pio mode

Message ID 20230419060639.38853-5-jaewon02.kim@samsung.com
State New
Headers show
Series Improves polling mode of s3c64xx driver | expand

Commit Message

Jaewon Kim April 19, 2023, 6:06 a.m. UTC
Interrupt based pio mode is supported to reduce CPU load.
If transfer size is larger than 32 byte, it is processed using interrupt.

Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
---
 drivers/spi/spi-s3c64xx.c | 82 ++++++++++++++++++++++++++++++++-------
 1 file changed, 67 insertions(+), 15 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index cf3060b2639b..ce1afb9a4ed4 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -58,6 +58,8 @@ 
 #define S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD	(1<<17)
 #define S3C64XX_SPI_MODE_BUS_TSZ_WORD		(2<<17)
 #define S3C64XX_SPI_MODE_BUS_TSZ_MASK		(3<<17)
+#define S3C64XX_SPI_MODE_RX_RDY_LVL		GENMASK(16, 11)
+#define S3C64XX_SPI_MODE_RX_RDY_LVL_SHIFT	11
 #define S3C64XX_SPI_MODE_SELF_LOOPBACK		(1<<3)
 #define S3C64XX_SPI_MODE_RXDMA_ON		(1<<2)
 #define S3C64XX_SPI_MODE_TXDMA_ON		(1<<1)
@@ -114,6 +116,8 @@ 
 
 #define S3C64XX_SPI_TRAILCNT		S3C64XX_SPI_MAX_TRAILCNT
 
+#define S3C64XX_SPI_POLLING_SIZE	32
+
 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
 #define is_polling(x)	(x->cntrlr_info->polling)
 
@@ -552,10 +556,11 @@  static int s3c64xx_wait_for_dma(struct s3c64xx_spi_driver_data *sdd,
 }
 
 static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd,
-				struct spi_transfer *xfer)
+				struct spi_transfer *xfer, int use_irq)
 {
 	void __iomem *regs = sdd->regs;
 	unsigned long val;
+	unsigned long time;
 	u32 status;
 	int loops;
 	u32 cpy_len;
@@ -563,17 +568,24 @@  static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd,
 	int ms;
 	u32 tx_time;
 
-	/* sleep during signal transfer time */
-	status = readl(regs + S3C64XX_SPI_STATUS);
-	if (RX_FIFO_LVL(status, sdd) < xfer->len) {
-		tx_time = (xfer->len * 8 * 1000 * 1000) / sdd->cur_speed;
-		usleep_range(tx_time / 2, tx_time);
-	}
-
 	/* millisecs to xfer 'len' bytes @ 'cur_speed' */
 	ms = xfer->len * 8 * 1000 / sdd->cur_speed;
 	ms += 10; /* some tolerance */
 
+	if (use_irq) {
+		val = msecs_to_jiffies(ms);
+		time = wait_for_completion_timeout(&sdd->xfer_completion, val);
+		if (!time)
+			return -EIO;
+	} else {
+		/* sleep during signal transfer time */
+		status = readl(regs + S3C64XX_SPI_STATUS);
+		if (RX_FIFO_LVL(status, sdd) < xfer->len) {
+			tx_time = (xfer->len * 8 * 1000 * 1000) / sdd->cur_speed;
+			usleep_range(tx_time / 2, tx_time);
+		}
+	}
+
 	val = msecs_to_loops(ms);
 	do {
 		cpu_relax();
@@ -737,10 +749,13 @@  static int s3c64xx_spi_transfer_one(struct spi_master *master,
 	void *rx_buf = NULL;
 	int target_len = 0, origin_len = 0;
 	int use_dma = 0;
+	int use_irq = 0;
 	int status;
 	u32 speed;
 	u8 bpw;
 	unsigned long flags;
+	u32 rdy_lv;
+	u32 val;
 
 	reinit_completion(&sdd->xfer_completion);
 
@@ -761,17 +776,46 @@  static int s3c64xx_spi_transfer_one(struct spi_master *master,
 	    sdd->rx_dma.ch && sdd->tx_dma.ch) {
 		use_dma = 1;
 
-	} else if (xfer->len > fifo_len) {
+	} else if (xfer->len >= fifo_len) {
 		tx_buf = xfer->tx_buf;
 		rx_buf = xfer->rx_buf;
 		origin_len = xfer->len;
-
 		target_len = xfer->len;
-		if (xfer->len > fifo_len)
-			xfer->len = fifo_len;
+		xfer->len = fifo_len - 1;
 	}
 
 	do {
+		/* transfer size is greater than 32, change to IRQ mode */
+		if (xfer->len > S3C64XX_SPI_POLLING_SIZE)
+			use_irq = 1;
+
+		if (use_irq) {
+			reinit_completion(&sdd->xfer_completion);
+
+			rdy_lv = xfer->len;
+			/* Setup RDY_FIFO trigger Level
+			 * RDY_LVL =
+			 * fifo_lvl up to 64 byte -> N bytes
+			 *               128 byte -> RDY_LVL * 2 bytes
+			 *               256 byte -> RDY_LVL * 4 bytes
+			 */
+			if (fifo_len == 128)
+				rdy_lv /= 2;
+			else if (fifo_len == 256)
+				rdy_lv /= 4;
+
+			val = readl(sdd->regs + S3C64XX_SPI_MODE_CFG);
+			val &= ~S3C64XX_SPI_MODE_RX_RDY_LVL;
+			val |= (rdy_lv << S3C64XX_SPI_MODE_RX_RDY_LVL_SHIFT);
+			writel(val, sdd->regs + S3C64XX_SPI_MODE_CFG);
+
+			/* Enable FIFO_RDY_EN IRQ */
+			val = readl(sdd->regs + S3C64XX_SPI_INT_EN);
+			writel((val | S3C64XX_SPI_INT_RX_FIFORDY_EN),
+					sdd->regs + S3C64XX_SPI_INT_EN);
+
+		}
+
 		spin_lock_irqsave(&sdd->lock, flags);
 
 		/* Pending only which is to be done */
@@ -793,7 +837,7 @@  static int s3c64xx_spi_transfer_one(struct spi_master *master,
 		if (use_dma)
 			status = s3c64xx_wait_for_dma(sdd, xfer);
 		else
-			status = s3c64xx_wait_for_pio(sdd, xfer);
+			status = s3c64xx_wait_for_pio(sdd, xfer, use_irq);
 
 		if (status) {
 			dev_err(&spi->dev,
@@ -832,8 +876,8 @@  static int s3c64xx_spi_transfer_one(struct spi_master *master,
 			if (xfer->rx_buf)
 				xfer->rx_buf += xfer->len;
 
-			if (target_len > fifo_len)
-				xfer->len = fifo_len;
+			if (target_len >= fifo_len)
+				xfer->len = fifo_len - 1;
 			else
 				xfer->len = target_len;
 		}
@@ -1003,6 +1047,14 @@  static irqreturn_t s3c64xx_spi_irq(int irq, void *data)
 		dev_err(&spi->dev, "TX underrun\n");
 	}
 
+	if (val & S3C64XX_SPI_ST_RX_FIFORDY) {
+		complete(&sdd->xfer_completion);
+		/* No pending clear irq, turn-off INT_EN_RX_FIFO_RDY */
+		val = readl(sdd->regs + S3C64XX_SPI_INT_EN);
+		writel((val & ~S3C64XX_SPI_INT_RX_FIFORDY_EN),
+				sdd->regs + S3C64XX_SPI_INT_EN);
+	}
+
 	/* Clear the pending irq by setting and then clearing it */
 	writel(clr, sdd->regs + S3C64XX_SPI_PENDING_CLR);
 	writel(0, sdd->regs + S3C64XX_SPI_PENDING_CLR);