| Message ID | f61c16e2fd7c91c2be6d6b67c902037580dbd364.1683034376.git.michal.simek@amd.com |
|---|---|
| State | Accepted |
| Commit | c506fe31d7220b088abd9312867849bc2ecf3f51 |
| Headers | show |
| Series | arm64: zynqmp: Misc zynqmp changes | expand |
On 5/2/23 15:35, Michal Simek wrote: > Production SOM has emmc on it and make sense to describe pin description to > be able use EMMC if it is not configured via psu_init. > (Still some regs are not handled but this is one step in that direction) > > Signed-off-by: Michal Simek <michal.simek@amd.com> > --- > > .../boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 20 +++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts > index c206021cccf7..e284979fd7b1 100644 > --- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts > +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts > @@ -14,6 +14,7 @@ > #include <dt-bindings/input/input.h> > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/phy/phy.h> > +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> > > / { > model = "ZynqMP SM-K26 Rev1/B/A"; > @@ -85,6 +86,23 @@ &uart1 { /* MIO36/MIO37 */ > status = "okay"; > }; > > +&pinctrl0 { > + status = "okay"; > + pinctrl_sdhci0_default: sdhci0-default { > + conf { > + groups = "sdio0_0_grp"; > + slew-rate = <SLEW_RATE_SLOW>; > + power-source = <IO_STANDARD_LVCMOS18>; > + bias-disable; > + }; > + > + mux { > + groups = "sdio0_0_grp"; > + function = "sdio0"; > + }; > + }; > +}; > + > &qspi { /* MIO 0-5 - U143 */ > status = "okay"; > spi_flash: flash@0 { /* MT25QU512A */ > @@ -189,6 +207,8 @@ partition@22A0000 { > > &sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */ > status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_sdhci0_default>; > non-removable; > disable-wp; > bus-width = <8>; Applied. M
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts index c206021cccf7..e284979fd7b1 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts @@ -14,6 +14,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/phy/phy.h> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> / { model = "ZynqMP SM-K26 Rev1/B/A"; @@ -85,6 +86,23 @@ &uart1 { /* MIO36/MIO37 */ status = "okay"; }; +&pinctrl0 { + status = "okay"; + pinctrl_sdhci0_default: sdhci0-default { + conf { + groups = "sdio0_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + + mux { + groups = "sdio0_0_grp"; + function = "sdio0"; + }; + }; +}; + &qspi { /* MIO 0-5 - U143 */ status = "okay"; spi_flash: flash@0 { /* MT25QU512A */ @@ -189,6 +207,8 @@ partition@22A0000 { &sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */ status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; non-removable; disable-wp; bus-width = <8>;
Production SOM has emmc on it and make sense to describe pin description to be able use EMMC if it is not configured via psu_init. (Still some regs are not handled but this is one step in that direction) Signed-off-by: Michal Simek <michal.simek@amd.com> --- .../boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+)