diff mbox series

[v6,5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine

Message ID 1683756453-22050-6-git-send-email-quic_khsieh@quicinc.com
State Superseded
Headers show
Series add DSC 1.2 dpu supports | expand

Commit Message

Kuogee Hsieh May 10, 2023, 10:07 p.m. UTC
Add support for DSC 1.2 by providing the necessary hooks to program
the DPU DSC 1.2 encoder.

Changes in v3:
-- fixed kernel test rebot report that "__iomem *off" is declared but not
   used at dpu_hw_dsc_config_1_2()
-- unrolling thresh loops

Changes in v4:
-- delete DPU_DSC_HW_REV_1_1
-- delete off and used real register name directly

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
---
 drivers/gpu/drm/msm/Makefile                   |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h |  32 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h     |  14 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c | 385 +++++++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c         |   7 +-
 5 files changed, 435 insertions(+), 4 deletions(-)
 create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c

Comments

Kuogee Hsieh May 11, 2023, 5 p.m. UTC | #1
On 5/10/2023 9:52 PM, Dmitry Baryshkov wrote:
> On 11/05/2023 01:07, Kuogee Hsieh wrote:
>> Add support for DSC 1.2 by providing the necessary hooks to program
>> the DPU DSC 1.2 encoder.
>>
>> Changes in v3:
>> -- fixed kernel test rebot report that "__iomem *off" is declared but 
>> not
>>     used at dpu_hw_dsc_config_1_2()
>> -- unrolling thresh loops
>>
>> Changes in v4:
>> -- delete DPU_DSC_HW_REV_1_1
>> -- delete off and used real register name directly
>>
>> Reported-by: kernel test robot <lkp@intel.com>
>> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
>> ---
>>   drivers/gpu/drm/msm/Makefile                   |   1 +
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h |  32 +-
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h     |  14 +-
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c | 385 
>> +++++++++++++++++++++++++
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c         |   7 +-
>>   5 files changed, 435 insertions(+), 4 deletions(-)
>>   create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
>>
>> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
>> index b814fc8..b9af5e4 100644
>> --- a/drivers/gpu/drm/msm/Makefile
>> +++ b/drivers/gpu/drm/msm/Makefile
>> @@ -65,6 +65,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \
>>       disp/dpu1/dpu_hw_catalog.o \
>>       disp/dpu1/dpu_hw_ctl.o \
>>       disp/dpu1/dpu_hw_dsc.o \
>> +    disp/dpu1/dpu_hw_dsc_1_2.o \
>>       disp/dpu1/dpu_hw_interrupts.o \
>>       disp/dpu1/dpu_hw_intf.o \
>>       disp/dpu1/dpu_hw_lm.o \
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h 
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> index dc0a4da..4eda2cc 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> @@ -1,6 +1,6 @@
>>   /* SPDX-License-Identifier: GPL-2.0-only */
>>   /*
>> - * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights 
>> reserved.
>> + * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All 
>> rights reserved.
>>    * Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights 
>> reserved.
>>    */
>>   @@ -244,12 +244,18 @@ enum {
>>   };
>>     /**
>> - * DSC features
>> + * DSC sub-blocks/features
>>    * @DPU_DSC_OUTPUT_CTRL       Configure which PINGPONG block gets
>>    *                            the pixel output from this DSC.
>> + * @DPU_DSC_HW_REV_1_2        DSC block supports dsc 1.1 and 1.2
>> + * @DPU_DSC_NATIVE_422_EN     Supports native422 and native420 encoding
>> + * @DPU_DSC_MAX
>>    */
>>   enum {
>>       DPU_DSC_OUTPUT_CTRL = 0x1,
>> +    DPU_DSC_HW_REV_1_2,
>> +    DPU_DSC_NATIVE_422_EN,
>> +    DPU_DSC_MAX
>>   };
>>     /**
>> @@ -306,6 +312,14 @@ struct dpu_pp_blk {
>>   };
>>     /**
>> + * struct dpu_dsc_blk - DSC Encoder sub-blk information
>> + * @info:   HW register and features supported by this sub-blk
>> + */
>> +struct dpu_dsc_blk {
>> +    DPU_HW_SUBBLK_INFO;
>> +};
>> +
>> +/**
>>    * enum dpu_qos_lut_usage - define QoS LUT use cases
>>    */
>>   enum dpu_qos_lut_usage {
>> @@ -452,6 +466,17 @@ struct dpu_pingpong_sub_blks {
>>   };
>>     /**
>> + * struct dpu_dsc_sub_blks - DSC sub-blks
>> + * @enc: DSC encoder sub block
>> + * @ctl: DSC controller sub block
>> + *
>> + */
>> +struct dpu_dsc_sub_blks {
>> +    struct dpu_dsc_blk enc;
>> +    struct dpu_dsc_blk ctl;
>> +};
>> +
>> +/**
>>    * dpu_clk_ctrl_type - Defines top level clock control signals
>>    */
>>   enum dpu_clk_ctrl_type {
>> @@ -605,10 +630,13 @@ struct dpu_merge_3d_cfg  {
>>    * struct dpu_dsc_cfg - information of DSC blocks
>>    * @id                 enum identifying this block
>>    * @base               register offset of this block
>> + * @len:               length of hardware block
>>    * @features           bit mask identifying sub-blocks/features
>> + * @sblk               sub-blocks information
>>    */
>>   struct dpu_dsc_cfg {
>>       DPU_HW_BLK_INFO;
>> +    const struct dpu_dsc_sub_blks *sblk;
>>   };
>>     /**
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h 
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
>> index 138080a..bdff74d 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
>> @@ -1,5 +1,8 @@
>>   /* SPDX-License-Identifier: GPL-2.0-only */
>> -/* Copyright (c) 2020-2022, Linaro Limited */
>> +/*
>> + * Copyright (c) 2020-2022, Linaro Limited
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights 
>> reserved
>> + */
>>     #ifndef _DPU_HW_DSC_H
>>   #define _DPU_HW_DSC_H
>> @@ -69,6 +72,15 @@ struct dpu_hw_dsc *dpu_hw_dsc_init(const struct 
>> dpu_dsc_cfg *cfg,
>>           void __iomem *addr);
>>     /**
>> + * dpu_hw_dsc_init_1_2 - initializes the v1.2 DSC hw driver block
>> + * @cfg:  DSC catalog entry for which driver object is required
>> + * @addr: Mapped register io address of MDP
>> + * Returns: Error code or allocated dpu_hw_dsc context
>> + */
>> +struct dpu_hw_dsc *dpu_hw_dsc_init_1_2(const struct dpu_dsc_cfg *cfg,
>> +        void __iomem *addr);
>> +
>> +/**
>>    * dpu_hw_dsc_destroy - destroys dsc driver context
>>    * @dsc:   Pointer to dsc driver context returned by dpu_hw_dsc_init
>>    */
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c 
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
>> new file mode 100644
>> index 00000000..0c77c85
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
>> @@ -0,0 +1,385 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights 
>> reserved
>> + */
>> +
>> +#include <drm/display/drm_dsc_helper.h>
>> +
>> +#include "dpu_kms.h"
>> +#include "dpu_hw_catalog.h"
>> +#include "dpu_hwio.h"
>> +#include "dpu_hw_mdss.h"
>> +#include "dpu_hw_dsc.h"
>> +
>> +#define DSC_CMN_MAIN_CNF           0x00
>> +
>> +/* DPU_DSC_ENC register offsets */
>> +#define ENC_DF_CTRL                0x00
>> +#define ENC_GENERAL_STATUS         0x04
>> +#define ENC_HSLICE_STATUS          0x08
>> +#define ENC_OUT_STATUS             0x0C
>> +#define ENC_INT_STAT               0x10
>> +#define ENC_INT_CLR                0x14
>> +#define ENC_INT_MASK               0x18
>> +#define DSC_MAIN_CONF              0x30
>> +#define DSC_PICTURE_SIZE           0x34
>> +#define DSC_SLICE_SIZE             0x38
>> +#define DSC_MISC_SIZE              0x3C
>> +#define DSC_HRD_DELAYS             0x40
>> +#define DSC_RC_SCALE               0x44
>> +#define DSC_RC_SCALE_INC_DEC       0x48
>> +#define DSC_RC_OFFSETS_1           0x4C
>> +#define DSC_RC_OFFSETS_2           0x50
>> +#define DSC_RC_OFFSETS_3           0x54
>> +#define DSC_RC_OFFSETS_4           0x58
>> +#define DSC_FLATNESS_QP            0x5C
>> +#define DSC_RC_MODEL_SIZE          0x60
>> +#define DSC_RC_CONFIG              0x64
>> +#define DSC_RC_BUF_THRESH_0        0x68
>> +#define DSC_RC_BUF_THRESH_1        0x6C
>> +#define DSC_RC_BUF_THRESH_2        0x70
>> +#define DSC_RC_BUF_THRESH_3        0x74
>> +#define DSC_RC_MIN_QP_0            0x78
>> +#define DSC_RC_MIN_QP_1            0x7C
>> +#define DSC_RC_MIN_QP_2            0x80
>> +#define DSC_RC_MAX_QP_0            0x84
>> +#define DSC_RC_MAX_QP_1            0x88
>> +#define DSC_RC_MAX_QP_2            0x8C
>> +#define DSC_RC_RANGE_BPG_OFFSETS_0 0x90
>> +#define DSC_RC_RANGE_BPG_OFFSETS_1 0x94
>> +#define DSC_RC_RANGE_BPG_OFFSETS_2 0x98
>> +
>> +/* DPU_DSC_CTL register offsets */
>> +#define DSC_CTL                    0x00
>> +#define DSC_CFG                    0x04
>> +#define DSC_DATA_IN_SWAP           0x08
>> +#define DSC_CLK_CTRL               0x0C
>> +
>> +static inline int _dsc_calc_ob_max_addr(struct dpu_hw_dsc *hw_dsc, 
>> int num_ss)
>> +{
>> +    int max_addr = 2400 / num_ss;
>> +
>> +    if (hw_dsc->caps->features & BIT(DPU_DSC_NATIVE_422_EN))
>> +        max_addr /= 2;
>> +
>> +    return max_addr - 1;
>> +};
>> +
>> +static inline void dpu_hw_dsc_disable_1_2(struct dpu_hw_dsc *hw_dsc)
>> +{
>> +    struct dpu_hw_blk_reg_map *hw;
>> +    u32 offset;
>> +
>> +    if (!hw_dsc)
>> +        return;
>> +
>> +    hw = &hw_dsc->hw;
>> +    offset = hw_dsc->caps->sblk->ctl.base;
>> +    DPU_REG_WRITE(hw, offset + DSC_CFG, 0);
>> +
>> +    offset = hw_dsc->caps->sblk->enc.base;
>> +    DPU_REG_WRITE(hw, offset + ENC_DF_CTRL, 0);
>> +    DPU_REG_WRITE(hw, offset + DSC_MAIN_CONF, 0);
>
> This has the same problem as before. By looking at this line you can 
> not check where this write is targeted. Instead I'd suggest storing 
> sblk in the local variable and then using something like:
>
> DPU_REG_WRITE(hw, sblk->ctl.base + DSC_CFG, 0);
>
> Same applies to other functions in this patch.
>
>> +}
>> +
>> +static inline void dpu_hw_dsc_config_1_2(struct dpu_hw_dsc *hw_dsc,
>> +                  struct drm_dsc_config *dsc,
>> +                  u32 mode,
>> +                  u32 initial_lines)
>
> Please indent to the opening brace. If using Vim, this is the "set 
> cino=(0" setting
>
>> +{
>> +    struct dpu_hw_blk_reg_map *hw;
>> +    u32 offset;
>> +    u32 data = 0;
>> +    u32 det_thresh_flatness;
>> +    u32 num_active_ss_per_enc;
>
> s/_ss_/_slice_/g
>
>> +    u32 bpp;
>> +
>> +    if (!hw_dsc || !dsc)
>> +        return;
>> +
>> +    hw = &hw_dsc->hw;
>> +
>> +    offset = hw_dsc->caps->sblk->enc.base;
>> +
>> +    if (mode & DSC_MODE_SPLIT_PANEL)
>> +        data |= BIT(0);
>> +
>> +    if (mode & DSC_MODE_MULTIPLEX)
>> +        data |= BIT(1);
>> +
>> +    num_active_ss_per_enc = dsc->slice_count;
>> +    if (mode & DSC_MODE_MULTIPLEX)
>> +        num_active_ss_per_enc = dsc->slice_count >> 1;
>> +
>> +    data |= (num_active_ss_per_enc & 0x3) << 7;
>> +
>> +    DPU_REG_WRITE(hw, DSC_CMN_MAIN_CNF, data);
>> +
>> +    data = (initial_lines & 0xff);
>> +
>> +    if (mode & DSC_MODE_VIDEO)
>> +        data |= BIT(9);
>> +
>> +    data |= (_dsc_calc_ob_max_addr(hw_dsc, num_active_ss_per_enc) << 
>> 18);
>> +
>> +    DPU_REG_WRITE(hw, offset + ENC_DF_CTRL, data);
>> +
>> +    data = (dsc->dsc_version_minor & 0xf) << 28;
>> +    if (dsc->dsc_version_minor == 0x2) {
>> +        if (dsc->native_422)
>> +            data |= BIT(22);
>> +        if (dsc->native_420)
>> +            data |= BIT(21);
>> +    }
>> +
>> +    bpp = dsc->bits_per_pixel;
>> +    /* as per hw requirement bpp should be programmed
>> +     * twice the actual value in case of 420 or 422 encoding
>> +     */
>> +    if (dsc->native_422 || dsc->native_420)
>> +        bpp = 2 * bpp;
>> +    data |= (dsc->block_pred_enable ? 1 : 0) << 20;
>> +    data |= bpp << 10;
>> +    data |= (dsc->line_buf_depth & 0xf) << 6;
>> +    data |= dsc->convert_rgb << 4;
>> +    data |= dsc->bits_per_component & 0xf;
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_MAIN_CONF, data);
>> +
>> +    data = (dsc->pic_width & 0xffff) |
>> +        ((dsc->pic_height & 0xffff) << 16);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_PICTURE_SIZE, data);
>> +
>> +    data = (dsc->slice_width & 0xffff) |
>> +        ((dsc->slice_height & 0xffff) << 16);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_SLICE_SIZE, data);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_MISC_SIZE,
>> +            (dsc->slice_chunk_size) & 0xffff);
>> +
>> +    data = (dsc->initial_xmit_delay & 0xffff) |
>> +        ((dsc->initial_dec_delay & 0xffff) << 16);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_HRD_DELAYS, data);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_SCALE,
>> +            dsc->initial_scale_value & 0x3f);
>> +
>> +    data = (dsc->scale_increment_interval & 0xffff) |
>> +        ((dsc->scale_decrement_interval & 0x7ff) << 16);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_SCALE_INC_DEC, data);
>> +
>> +    data = (dsc->first_line_bpg_offset & 0x1f) |
>> +        ((dsc->second_line_bpg_offset & 0x1f) << 5);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_1, data);
>> +
>> +    data = (dsc->nfl_bpg_offset & 0xffff) |
>> +        ((dsc->slice_bpg_offset & 0xffff) << 16);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_2, data);
>> +
>> +    data = (dsc->initial_offset & 0xffff) |
>> +        ((dsc->final_offset & 0xffff) << 16);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_3, data);
>> +
>> +    data = (dsc->nsl_bpg_offset & 0xffff) |
>> +        ((dsc->second_line_offset_adj & 0xffff) << 16);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_4, data);
>> +
>> +    data = (dsc->flatness_min_qp & 0x1f);
>> +    data |= (dsc->flatness_max_qp & 0x1f) << 5;
>> +
>> +    det_thresh_flatness = drm_dsc_calculate_flatness_det_thresh(dsc);
>> +    data |= (det_thresh_flatness & 0xff) << 10;
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_FLATNESS_QP, data);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_MODEL_SIZE,
>> +            (dsc->rc_model_size) & 0xffff);
>> +
>> +    data = dsc->rc_edge_factor & 0xf;
>> +    data |= (dsc->rc_quant_incr_limit0 & 0x1f) << 8;
>> +    data |= (dsc->rc_quant_incr_limit1 & 0x1f) << 13;
>> +    data |= (dsc->rc_tgt_offset_high & 0xf) << 20;
>> +    data |= (dsc->rc_tgt_offset_low & 0xf) << 24;
>
> FIELD_PREP should become our friend. As the DPU driver does not use 
> generated headers/helpers, we should probably enforce its usage all 
> over the code.

Agree, since this patch series have almost complete the review process.

can we start use FIELD_PREP at next?

>
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_CONFIG, data);
>> +
>> +    /* program the dsc wrapper */
>> +    offset = hw_dsc->caps->sblk->ctl.base;
>> +
>> +    data = BIT(0); /* encoder enable */
>> +    if (dsc->native_422)
>> +        data |= BIT(8);
>> +    else if (dsc->native_420)
>> +        data |= BIT(9);
>> +    if (!dsc->convert_rgb)
>> +        data |= BIT(10);
>> +    if (dsc->bits_per_component == 8)
>> +        data |= BIT(11);
>> +    if (mode & DSC_MODE_SPLIT_PANEL)
>> +        data |= BIT(12);
>> +    if (mode & DSC_MODE_MULTIPLEX)
>> +        data |= BIT(13);
>> +    if (!(mode & DSC_MODE_VIDEO))
>> +        data |= BIT(17);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_CFG, data);
>> +}
>> +
>> +static inline void dpu_hw_dsc_config_thresh_1_2(struct dpu_hw_dsc 
>> *hw_dsc,
>> +                    struct drm_dsc_config *dsc)
>
> indent
>
>> +{
>> +    struct dpu_hw_blk_reg_map *hw;
>> +    u32 offset;
>> +    struct drm_dsc_rc_range_parameters *rc;
>> +
>> +    if (!hw_dsc || !dsc)
>> +        return;
>> +
>> +    offset = hw_dsc->caps->sblk->enc.base;
>> +
>> +    hw = &hw_dsc->hw;
>> +
>> +    rc = dsc->rc_range_params;
>> +
>> +    /*
>> +     * With BUF_THRESH -- 14 in total
>> +     * each register contains 4 thresh values with the last register
>> +     * containing only 2 thresh values
>> +     */
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_0,
>> +                    (dsc->rc_buf_thresh[0] << 0) |
>> +                    (dsc->rc_buf_thresh[1] << 8) |
>> +                    (dsc->rc_buf_thresh[2] << 16) |
>> +                    (dsc->rc_buf_thresh[3] << 24));
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_1,
>> +                    (dsc->rc_buf_thresh[4] << 0) |
>> +                    (dsc->rc_buf_thresh[5] << 8) |
>> +                    (dsc->rc_buf_thresh[6] << 16) |
>> +                    (dsc->rc_buf_thresh[7] << 24));
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_2,
>> +                    (dsc->rc_buf_thresh[8] << 0) |
>> +                    (dsc->rc_buf_thresh[9] << 8) |
>> +                    (dsc->rc_buf_thresh[10] << 16) |
>> +                    (dsc->rc_buf_thresh[11] << 24));
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_3,
>> +                    (dsc->rc_buf_thresh[12] << 0) |
>> +                    (dsc->rc_buf_thresh[13] << 8));
>> +
>> +    /*
>> +     * with min/max_QP -- 5 bits each
>> +     * each register contains 5 min_qp or max_qp for total of 15
>> +     *
>> +     * With BPG_OFFSET -- 6 bits each
>> +     * each register contains 5 BPG_offset for total of 15
>> +     */
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_MIN_QP_0,
>> +                    (rc[0].range_min_qp << 0) |
>> +                    (rc[1].range_min_qp << 5) |
>> +                    (rc[2].range_min_qp << 10) |
>> +                    (rc[3].range_min_qp << 15) |
>> +                    (rc[4].range_min_qp << 20));
>
> This is over-indented.
>
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_MAX_QP_0,
>> +                    (rc[0].range_max_qp << 0) |
>> +                    (rc[1].range_max_qp << 5) |
>> +                    (rc[2].range_max_qp << 10) |
>> +                    (rc[3].range_max_qp << 15) |
>> +                    (rc[4].range_max_qp << 20));
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_RANGE_BPG_OFFSETS_0,
>> +                    (rc[0].range_bpg_offset << 0) |
>> +                    (rc[1].range_bpg_offset << 6) |
>> +                    (rc[2].range_bpg_offset << 12) |
>> +                    (rc[3].range_bpg_offset << 18) |
>> +                    (rc[4].range_bpg_offset << 24));
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_MIN_QP_1,
>> +                    (rc[5].range_min_qp << 0) |
>> +                    (rc[6].range_min_qp << 5) |
>> +                    (rc[7].range_min_qp << 10) |
>> +                    (rc[8].range_min_qp << 15) |
>> +                    (rc[9].range_min_qp << 20));
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_MAX_QP_1,
>> +                    (rc[5].range_max_qp << 0) |
>> +                    (rc[6].range_max_qp << 5) |
>> +                    (rc[7].range_max_qp << 10) |
>> +                    (rc[8].range_max_qp << 15) |
>> +                    (rc[9].range_max_qp << 20));
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_RANGE_BPG_OFFSETS_1,
>> +                    (rc[5].range_bpg_offset << 0) |
>> +                    (rc[6].range_bpg_offset << 6) |
>> +                    (rc[7].range_bpg_offset << 12) |
>> +                    (rc[8].range_bpg_offset << 18) |
>> +                    (rc[9].range_bpg_offset << 24));
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_MIN_QP_2,
>> +                    (rc[10].range_min_qp << 0) |
>> +                    (rc[11].range_min_qp << 5) |
>> +                    (rc[12].range_min_qp << 10) |
>> +                    (rc[13].range_min_qp << 15) |
>> +                    (rc[14].range_min_qp << 20));
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_MAX_QP_2,
>> +                    (rc[10].range_max_qp << 0) |
>> +                    (rc[11].range_max_qp << 5) |
>> +                    (rc[12].range_max_qp << 10) |
>> +                    (rc[13].range_max_qp << 15) |
>> +                    (rc[14].range_max_qp << 20));
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_RANGE_BPG_OFFSETS_2,
>> +                    (rc[10].range_bpg_offset << 0) |
>> +                    (rc[11].range_bpg_offset << 6) |
>> +                    (rc[12].range_bpg_offset << 12) |
>> +                    (rc[13].range_bpg_offset << 18) |
>> +                    (rc[14].range_bpg_offset << 24));
>> +}
>> +
>> +static inline void dpu_hw_dsc_bind_pingpong_blk_1_2(
>> +        struct dpu_hw_dsc *hw_dsc,
>> +        const enum dpu_pingpong pp)
>> +{
>> +    struct dpu_hw_blk_reg_map *hw;
>> +    int offset;
>> +    int mux_cfg = 0xf; /* Disabled */
>> +
>> +    offset = hw_dsc->caps->sblk->ctl.base;
>> +
>> +    hw = &hw_dsc->hw;
>> +    if (pp)
>> +        mux_cfg = (pp - PINGPONG_0) & 0x7;
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_CTL, mux_cfg);
>> +}
>> +
>> +static void _setup_dcs_ops_1_2(struct dpu_hw_dsc_ops *ops,
>> +        const unsigned long features)
>> +{
>> +    ops->dsc_disable = dpu_hw_dsc_disable_1_2;
>> +    ops->dsc_config = dpu_hw_dsc_config_1_2;
>> +    ops->dsc_config_thresh = dpu_hw_dsc_config_thresh_1_2;
>> +    ops->dsc_bind_pingpong_blk = dpu_hw_dsc_bind_pingpong_blk_1_2;
>> +}
>> +
>> +struct dpu_hw_dsc *dpu_hw_dsc_init_1_2(const struct dpu_dsc_cfg *cfg,
>> +                   void __iomem *addr)
>> +{
>> +    struct dpu_hw_dsc *c;
>> +
>> +    c = kzalloc(sizeof(*c), GFP_KERNEL);
>> +    if (!c)
>> +        return ERR_PTR(-ENOMEM);
>> +
>> +    c->hw.blk_addr = addr + cfg->base;
>> +    c->hw.log_mask = DPU_DBG_MASK_DSC;
>> +
>> +    c->idx = cfg->id;
>> +    c->caps = cfg;
>> +    _setup_dcs_ops_1_2(&c->ops, c->caps->features);
>> +
>> +    return c;
>> +}
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c 
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
>> index f0fc704..502dd60 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
>> @@ -1,6 +1,7 @@
>>   // SPDX-License-Identifier: GPL-2.0-only
>>   /*
>>    * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights 
>> reserved.
>>    */
>>     #define pr_fmt(fmt)    "[drm:%s] " fmt, __func__
>> @@ -246,7 +247,11 @@ int dpu_rm_init(struct dpu_rm *rm,
>>           struct dpu_hw_dsc *hw;
>>           const struct dpu_dsc_cfg *dsc = &cat->dsc[i];
>>   -        hw = dpu_hw_dsc_init(dsc, mmio);
>> +        if (test_bit(DPU_DSC_HW_REV_1_2, &dsc->features))
>> +            hw = dpu_hw_dsc_init_1_2(dsc, mmio);
>> +        else
>> +            hw = dpu_hw_dsc_init(dsc, mmio);
>> +
>>           if (IS_ERR_OR_NULL(hw)) {
>>               rc = PTR_ERR(hw);
>>               DPU_ERROR("failed dsc object creation: err %d\n", rc);
>
Dmitry Baryshkov May 11, 2023, 5:24 p.m. UTC | #2
On 11/05/2023 20:00, Kuogee Hsieh wrote:
> 
> On 5/10/2023 9:52 PM, Dmitry Baryshkov wrote:
>> On 11/05/2023 01:07, Kuogee Hsieh wrote:
>>> Add support for DSC 1.2 by providing the necessary hooks to program
>>> the DPU DSC 1.2 encoder.
>>>
>>> Changes in v3:
>>> -- fixed kernel test rebot report that "__iomem *off" is declared but 
>>> not
>>>     used at dpu_hw_dsc_config_1_2()
>>> -- unrolling thresh loops
>>>
>>> Changes in v4:
>>> -- delete DPU_DSC_HW_REV_1_1
>>> -- delete off and used real register name directly
>>>
>>> Reported-by: kernel test robot <lkp@intel.com>
>>> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
>>> ---
>>>   drivers/gpu/drm/msm/Makefile                   |   1 +
>>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h |  32 +-
>>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h     |  14 +-
>>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c | 385 
>>> +++++++++++++++++++++++++
>>>   drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c         |   7 +-
>>>   5 files changed, 435 insertions(+), 4 deletions(-)
>>>   create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
>>>
>>> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
>>> index b814fc8..b9af5e4 100644
>>> --- a/drivers/gpu/drm/msm/Makefile
>>> +++ b/drivers/gpu/drm/msm/Makefile
>>> @@ -65,6 +65,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \
>>>       disp/dpu1/dpu_hw_catalog.o \
>>>       disp/dpu1/dpu_hw_ctl.o \
>>>       disp/dpu1/dpu_hw_dsc.o \
>>> +    disp/dpu1/dpu_hw_dsc_1_2.o \
>>>       disp/dpu1/dpu_hw_interrupts.o \
>>>       disp/dpu1/dpu_hw_intf.o \
>>>       disp/dpu1/dpu_hw_lm.o \
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h 
>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> index dc0a4da..4eda2cc 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> @@ -1,6 +1,6 @@
>>>   /* SPDX-License-Identifier: GPL-2.0-only */
>>>   /*
>>> - * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights 
>>> reserved.
>>> + * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All 
>>> rights reserved.
>>>    * Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights 
>>> reserved.
>>>    */
>>>   @@ -244,12 +244,18 @@ enum {
>>>   };
>>>     /**
>>> - * DSC features
>>> + * DSC sub-blocks/features
>>>    * @DPU_DSC_OUTPUT_CTRL       Configure which PINGPONG block gets
>>>    *                            the pixel output from this DSC.
>>> + * @DPU_DSC_HW_REV_1_2        DSC block supports dsc 1.1 and 1.2
>>> + * @DPU_DSC_NATIVE_422_EN     Supports native422 and native420 encoding
>>> + * @DPU_DSC_MAX
>>>    */
>>>   enum {
>>>       DPU_DSC_OUTPUT_CTRL = 0x1,
>>> +    DPU_DSC_HW_REV_1_2,
>>> +    DPU_DSC_NATIVE_422_EN,
>>> +    DPU_DSC_MAX
>>>   };
>>>     /**
>>> @@ -306,6 +312,14 @@ struct dpu_pp_blk {
>>>   };
>>>     /**
>>> + * struct dpu_dsc_blk - DSC Encoder sub-blk information
>>> + * @info:   HW register and features supported by this sub-blk
>>> + */
>>> +struct dpu_dsc_blk {
>>> +    DPU_HW_SUBBLK_INFO;
>>> +};
>>> +
>>> +/**
>>>    * enum dpu_qos_lut_usage - define QoS LUT use cases
>>>    */
>>>   enum dpu_qos_lut_usage {
>>> @@ -452,6 +466,17 @@ struct dpu_pingpong_sub_blks {
>>>   };
>>>     /**
>>> + * struct dpu_dsc_sub_blks - DSC sub-blks
>>> + * @enc: DSC encoder sub block
>>> + * @ctl: DSC controller sub block
>>> + *
>>> + */
>>> +struct dpu_dsc_sub_blks {
>>> +    struct dpu_dsc_blk enc;
>>> +    struct dpu_dsc_blk ctl;
>>> +};
>>> +
>>> +/**
>>>    * dpu_clk_ctrl_type - Defines top level clock control signals
>>>    */
>>>   enum dpu_clk_ctrl_type {
>>> @@ -605,10 +630,13 @@ struct dpu_merge_3d_cfg  {
>>>    * struct dpu_dsc_cfg - information of DSC blocks
>>>    * @id                 enum identifying this block
>>>    * @base               register offset of this block
>>> + * @len:               length of hardware block
>>>    * @features           bit mask identifying sub-blocks/features
>>> + * @sblk               sub-blocks information
>>>    */
>>>   struct dpu_dsc_cfg {
>>>       DPU_HW_BLK_INFO;
>>> +    const struct dpu_dsc_sub_blks *sblk;
>>>   };
>>>     /**
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h 
>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
>>> index 138080a..bdff74d 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
>>> @@ -1,5 +1,8 @@
>>>   /* SPDX-License-Identifier: GPL-2.0-only */
>>> -/* Copyright (c) 2020-2022, Linaro Limited */
>>> +/*
>>> + * Copyright (c) 2020-2022, Linaro Limited
>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights 
>>> reserved
>>> + */
>>>     #ifndef _DPU_HW_DSC_H
>>>   #define _DPU_HW_DSC_H
>>> @@ -69,6 +72,15 @@ struct dpu_hw_dsc *dpu_hw_dsc_init(const struct 
>>> dpu_dsc_cfg *cfg,
>>>           void __iomem *addr);
>>>     /**
>>> + * dpu_hw_dsc_init_1_2 - initializes the v1.2 DSC hw driver block
>>> + * @cfg:  DSC catalog entry for which driver object is required
>>> + * @addr: Mapped register io address of MDP
>>> + * Returns: Error code or allocated dpu_hw_dsc context
>>> + */
>>> +struct dpu_hw_dsc *dpu_hw_dsc_init_1_2(const struct dpu_dsc_cfg *cfg,
>>> +        void __iomem *addr);
>>> +
>>> +/**
>>>    * dpu_hw_dsc_destroy - destroys dsc driver context
>>>    * @dsc:   Pointer to dsc driver context returned by dpu_hw_dsc_init
>>>    */
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c 
>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
>>> new file mode 100644
>>> index 00000000..0c77c85
>>> --- /dev/null
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
>>> @@ -0,0 +1,385 @@
>>> +// SPDX-License-Identifier: GPL-2.0-only
>>> +/*
>>> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights 
>>> reserved
>>> + */
>>> +
>>> +#include <drm/display/drm_dsc_helper.h>
>>> +
>>> +#include "dpu_kms.h"
>>> +#include "dpu_hw_catalog.h"
>>> +#include "dpu_hwio.h"
>>> +#include "dpu_hw_mdss.h"
>>> +#include "dpu_hw_dsc.h"
>>> +
>>> +#define DSC_CMN_MAIN_CNF           0x00
>>> +
>>> +/* DPU_DSC_ENC register offsets */
>>> +#define ENC_DF_CTRL                0x00
>>> +#define ENC_GENERAL_STATUS         0x04
>>> +#define ENC_HSLICE_STATUS          0x08
>>> +#define ENC_OUT_STATUS             0x0C
>>> +#define ENC_INT_STAT               0x10
>>> +#define ENC_INT_CLR                0x14
>>> +#define ENC_INT_MASK               0x18
>>> +#define DSC_MAIN_CONF              0x30
>>> +#define DSC_PICTURE_SIZE           0x34
>>> +#define DSC_SLICE_SIZE             0x38
>>> +#define DSC_MISC_SIZE              0x3C
>>> +#define DSC_HRD_DELAYS             0x40
>>> +#define DSC_RC_SCALE               0x44
>>> +#define DSC_RC_SCALE_INC_DEC       0x48
>>> +#define DSC_RC_OFFSETS_1           0x4C
>>> +#define DSC_RC_OFFSETS_2           0x50
>>> +#define DSC_RC_OFFSETS_3           0x54
>>> +#define DSC_RC_OFFSETS_4           0x58
>>> +#define DSC_FLATNESS_QP            0x5C
>>> +#define DSC_RC_MODEL_SIZE          0x60
>>> +#define DSC_RC_CONFIG              0x64
>>> +#define DSC_RC_BUF_THRESH_0        0x68
>>> +#define DSC_RC_BUF_THRESH_1        0x6C
>>> +#define DSC_RC_BUF_THRESH_2        0x70
>>> +#define DSC_RC_BUF_THRESH_3        0x74
>>> +#define DSC_RC_MIN_QP_0            0x78
>>> +#define DSC_RC_MIN_QP_1            0x7C
>>> +#define DSC_RC_MIN_QP_2            0x80
>>> +#define DSC_RC_MAX_QP_0            0x84
>>> +#define DSC_RC_MAX_QP_1            0x88
>>> +#define DSC_RC_MAX_QP_2            0x8C
>>> +#define DSC_RC_RANGE_BPG_OFFSETS_0 0x90
>>> +#define DSC_RC_RANGE_BPG_OFFSETS_1 0x94
>>> +#define DSC_RC_RANGE_BPG_OFFSETS_2 0x98
>>> +
>>> +/* DPU_DSC_CTL register offsets */
>>> +#define DSC_CTL                    0x00
>>> +#define DSC_CFG                    0x04
>>> +#define DSC_DATA_IN_SWAP           0x08
>>> +#define DSC_CLK_CTRL               0x0C
>>> +
>>> +static inline int _dsc_calc_ob_max_addr(struct dpu_hw_dsc *hw_dsc, 
>>> int num_ss)
>>> +{
>>> +    int max_addr = 2400 / num_ss;
>>> +
>>> +    if (hw_dsc->caps->features & BIT(DPU_DSC_NATIVE_422_EN))
>>> +        max_addr /= 2;
>>> +
>>> +    return max_addr - 1;
>>> +};
>>> +
>>> +static inline void dpu_hw_dsc_disable_1_2(struct dpu_hw_dsc *hw_dsc)
>>> +{
>>> +    struct dpu_hw_blk_reg_map *hw;
>>> +    u32 offset;
>>> +
>>> +    if (!hw_dsc)
>>> +        return;
>>> +
>>> +    hw = &hw_dsc->hw;
>>> +    offset = hw_dsc->caps->sblk->ctl.base;
>>> +    DPU_REG_WRITE(hw, offset + DSC_CFG, 0);
>>> +
>>> +    offset = hw_dsc->caps->sblk->enc.base;
>>> +    DPU_REG_WRITE(hw, offset + ENC_DF_CTRL, 0);
>>> +    DPU_REG_WRITE(hw, offset + DSC_MAIN_CONF, 0);
>>
>> This has the same problem as before. By looking at this line you can 
>> not check where this write is targeted. Instead I'd suggest storing 
>> sblk in the local variable and then using something like:
>>
>> DPU_REG_WRITE(hw, sblk->ctl.base + DSC_CFG, 0);
>>
>> Same applies to other functions in this patch.
>>
>>> +}
>>> +
>>> +static inline void dpu_hw_dsc_config_1_2(struct dpu_hw_dsc *hw_dsc,
>>> +                  struct drm_dsc_config *dsc,
>>> +                  u32 mode,
>>> +                  u32 initial_lines)
>>
>> Please indent to the opening brace. If using Vim, this is the "set 
>> cino=(0" setting
>>
>>> +{
>>> +    struct dpu_hw_blk_reg_map *hw;
>>> +    u32 offset;
>>> +    u32 data = 0;
>>> +    u32 det_thresh_flatness;
>>> +    u32 num_active_ss_per_enc;
>>
>> s/_ss_/_slice_/g
>>
>>> +    u32 bpp;
>>> +
>>> +    if (!hw_dsc || !dsc)
>>> +        return;
>>> +
>>> +    hw = &hw_dsc->hw;
>>> +
>>> +    offset = hw_dsc->caps->sblk->enc.base;
>>> +
>>> +    if (mode & DSC_MODE_SPLIT_PANEL)
>>> +        data |= BIT(0);
>>> +
>>> +    if (mode & DSC_MODE_MULTIPLEX)
>>> +        data |= BIT(1);
>>> +
>>> +    num_active_ss_per_enc = dsc->slice_count;
>>> +    if (mode & DSC_MODE_MULTIPLEX)
>>> +        num_active_ss_per_enc = dsc->slice_count >> 1;
>>> +
>>> +    data |= (num_active_ss_per_enc & 0x3) << 7;
>>> +
>>> +    DPU_REG_WRITE(hw, DSC_CMN_MAIN_CNF, data);
>>> +
>>> +    data = (initial_lines & 0xff);
>>> +
>>> +    if (mode & DSC_MODE_VIDEO)
>>> +        data |= BIT(9);
>>> +
>>> +    data |= (_dsc_calc_ob_max_addr(hw_dsc, num_active_ss_per_enc) << 
>>> 18);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + ENC_DF_CTRL, data);
>>> +
>>> +    data = (dsc->dsc_version_minor & 0xf) << 28;
>>> +    if (dsc->dsc_version_minor == 0x2) {
>>> +        if (dsc->native_422)
>>> +            data |= BIT(22);
>>> +        if (dsc->native_420)
>>> +            data |= BIT(21);
>>> +    }
>>> +
>>> +    bpp = dsc->bits_per_pixel;
>>> +    /* as per hw requirement bpp should be programmed
>>> +     * twice the actual value in case of 420 or 422 encoding
>>> +     */
>>> +    if (dsc->native_422 || dsc->native_420)
>>> +        bpp = 2 * bpp;
>>> +    data |= (dsc->block_pred_enable ? 1 : 0) << 20;
>>> +    data |= bpp << 10;
>>> +    data |= (dsc->line_buf_depth & 0xf) << 6;
>>> +    data |= dsc->convert_rgb << 4;
>>> +    data |= dsc->bits_per_component & 0xf;
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_MAIN_CONF, data);
>>> +
>>> +    data = (dsc->pic_width & 0xffff) |
>>> +        ((dsc->pic_height & 0xffff) << 16);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_PICTURE_SIZE, data);
>>> +
>>> +    data = (dsc->slice_width & 0xffff) |
>>> +        ((dsc->slice_height & 0xffff) << 16);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_SLICE_SIZE, data);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_MISC_SIZE,
>>> +            (dsc->slice_chunk_size) & 0xffff);
>>> +
>>> +    data = (dsc->initial_xmit_delay & 0xffff) |
>>> +        ((dsc->initial_dec_delay & 0xffff) << 16);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_HRD_DELAYS, data);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_RC_SCALE,
>>> +            dsc->initial_scale_value & 0x3f);
>>> +
>>> +    data = (dsc->scale_increment_interval & 0xffff) |
>>> +        ((dsc->scale_decrement_interval & 0x7ff) << 16);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_RC_SCALE_INC_DEC, data);
>>> +
>>> +    data = (dsc->first_line_bpg_offset & 0x1f) |
>>> +        ((dsc->second_line_bpg_offset & 0x1f) << 5);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_1, data);
>>> +
>>> +    data = (dsc->nfl_bpg_offset & 0xffff) |
>>> +        ((dsc->slice_bpg_offset & 0xffff) << 16);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_2, data);
>>> +
>>> +    data = (dsc->initial_offset & 0xffff) |
>>> +        ((dsc->final_offset & 0xffff) << 16);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_3, data);
>>> +
>>> +    data = (dsc->nsl_bpg_offset & 0xffff) |
>>> +        ((dsc->second_line_offset_adj & 0xffff) << 16);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_4, data);
>>> +
>>> +    data = (dsc->flatness_min_qp & 0x1f);
>>> +    data |= (dsc->flatness_max_qp & 0x1f) << 5;
>>> +
>>> +    det_thresh_flatness = drm_dsc_calculate_flatness_det_thresh(dsc);
>>> +    data |= (det_thresh_flatness & 0xff) << 10;
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_FLATNESS_QP, data);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_RC_MODEL_SIZE,
>>> +            (dsc->rc_model_size) & 0xffff);
>>> +
>>> +    data = dsc->rc_edge_factor & 0xf;
>>> +    data |= (dsc->rc_quant_incr_limit0 & 0x1f) << 8;
>>> +    data |= (dsc->rc_quant_incr_limit1 & 0x1f) << 13;
>>> +    data |= (dsc->rc_tgt_offset_high & 0xf) << 20;
>>> +    data |= (dsc->rc_tgt_offset_low & 0xf) << 24;
>>
>> FIELD_PREP should become our friend. As the DPU driver does not use 
>> generated headers/helpers, we should probably enforce its usage all 
>> over the code.
> 
> Agree, since this patch series have almost complete the review process.
> 
> can we start use FIELD_PREP at next?

Yes
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index b814fc8..b9af5e4 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -65,6 +65,7 @@  msm-$(CONFIG_DRM_MSM_DPU) += \
 	disp/dpu1/dpu_hw_catalog.o \
 	disp/dpu1/dpu_hw_ctl.o \
 	disp/dpu1/dpu_hw_dsc.o \
+	disp/dpu1/dpu_hw_dsc_1_2.o \
 	disp/dpu1/dpu_hw_interrupts.o \
 	disp/dpu1/dpu_hw_intf.o \
 	disp/dpu1/dpu_hw_lm.o \
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index dc0a4da..4eda2cc 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -1,6 +1,6 @@ 
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All rights reserved.
  * Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights reserved.
  */
 
@@ -244,12 +244,18 @@  enum {
 };
 
 /**
- * DSC features
+ * DSC sub-blocks/features
  * @DPU_DSC_OUTPUT_CTRL       Configure which PINGPONG block gets
  *                            the pixel output from this DSC.
+ * @DPU_DSC_HW_REV_1_2        DSC block supports dsc 1.1 and 1.2
+ * @DPU_DSC_NATIVE_422_EN     Supports native422 and native420 encoding
+ * @DPU_DSC_MAX
  */
 enum {
 	DPU_DSC_OUTPUT_CTRL = 0x1,
+	DPU_DSC_HW_REV_1_2,
+	DPU_DSC_NATIVE_422_EN,
+	DPU_DSC_MAX
 };
 
 /**
@@ -306,6 +312,14 @@  struct dpu_pp_blk {
 };
 
 /**
+ * struct dpu_dsc_blk - DSC Encoder sub-blk information
+ * @info:   HW register and features supported by this sub-blk
+ */
+struct dpu_dsc_blk {
+	DPU_HW_SUBBLK_INFO;
+};
+
+/**
  * enum dpu_qos_lut_usage - define QoS LUT use cases
  */
 enum dpu_qos_lut_usage {
@@ -452,6 +466,17 @@  struct dpu_pingpong_sub_blks {
 };
 
 /**
+ * struct dpu_dsc_sub_blks - DSC sub-blks
+ * @enc: DSC encoder sub block
+ * @ctl: DSC controller sub block
+ *
+ */
+struct dpu_dsc_sub_blks {
+	struct dpu_dsc_blk enc;
+	struct dpu_dsc_blk ctl;
+};
+
+/**
  * dpu_clk_ctrl_type - Defines top level clock control signals
  */
 enum dpu_clk_ctrl_type {
@@ -605,10 +630,13 @@  struct dpu_merge_3d_cfg  {
  * struct dpu_dsc_cfg - information of DSC blocks
  * @id                 enum identifying this block
  * @base               register offset of this block
+ * @len:               length of hardware block
  * @features           bit mask identifying sub-blocks/features
+ * @sblk               sub-blocks information
  */
 struct dpu_dsc_cfg {
 	DPU_HW_BLK_INFO;
+	const struct dpu_dsc_sub_blks *sblk;
 };
 
 /**
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
index 138080a..bdff74d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
@@ -1,5 +1,8 @@ 
 /* SPDX-License-Identifier: GPL-2.0-only */
-/* Copyright (c) 2020-2022, Linaro Limited */
+/*
+ * Copyright (c) 2020-2022, Linaro Limited
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved
+ */
 
 #ifndef _DPU_HW_DSC_H
 #define _DPU_HW_DSC_H
@@ -69,6 +72,15 @@  struct dpu_hw_dsc *dpu_hw_dsc_init(const struct dpu_dsc_cfg *cfg,
 		void __iomem *addr);
 
 /**
+ * dpu_hw_dsc_init_1_2 - initializes the v1.2 DSC hw driver block
+ * @cfg:  DSC catalog entry for which driver object is required
+ * @addr: Mapped register io address of MDP
+ * Returns: Error code or allocated dpu_hw_dsc context
+ */
+struct dpu_hw_dsc *dpu_hw_dsc_init_1_2(const struct dpu_dsc_cfg *cfg,
+		void __iomem *addr);
+
+/**
  * dpu_hw_dsc_destroy - destroys dsc driver context
  * @dsc:   Pointer to dsc driver context returned by dpu_hw_dsc_init
  */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
new file mode 100644
index 00000000..0c77c85
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
@@ -0,0 +1,385 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved
+ */
+
+#include <drm/display/drm_dsc_helper.h>
+
+#include "dpu_kms.h"
+#include "dpu_hw_catalog.h"
+#include "dpu_hwio.h"
+#include "dpu_hw_mdss.h"
+#include "dpu_hw_dsc.h"
+
+#define DSC_CMN_MAIN_CNF           0x00
+
+/* DPU_DSC_ENC register offsets */
+#define ENC_DF_CTRL                0x00
+#define ENC_GENERAL_STATUS         0x04
+#define ENC_HSLICE_STATUS          0x08
+#define ENC_OUT_STATUS             0x0C
+#define ENC_INT_STAT               0x10
+#define ENC_INT_CLR                0x14
+#define ENC_INT_MASK               0x18
+#define DSC_MAIN_CONF              0x30
+#define DSC_PICTURE_SIZE           0x34
+#define DSC_SLICE_SIZE             0x38
+#define DSC_MISC_SIZE              0x3C
+#define DSC_HRD_DELAYS             0x40
+#define DSC_RC_SCALE               0x44
+#define DSC_RC_SCALE_INC_DEC       0x48
+#define DSC_RC_OFFSETS_1           0x4C
+#define DSC_RC_OFFSETS_2           0x50
+#define DSC_RC_OFFSETS_3           0x54
+#define DSC_RC_OFFSETS_4           0x58
+#define DSC_FLATNESS_QP            0x5C
+#define DSC_RC_MODEL_SIZE          0x60
+#define DSC_RC_CONFIG              0x64
+#define DSC_RC_BUF_THRESH_0        0x68
+#define DSC_RC_BUF_THRESH_1        0x6C
+#define DSC_RC_BUF_THRESH_2        0x70
+#define DSC_RC_BUF_THRESH_3        0x74
+#define DSC_RC_MIN_QP_0            0x78
+#define DSC_RC_MIN_QP_1            0x7C
+#define DSC_RC_MIN_QP_2            0x80
+#define DSC_RC_MAX_QP_0            0x84
+#define DSC_RC_MAX_QP_1            0x88
+#define DSC_RC_MAX_QP_2            0x8C
+#define DSC_RC_RANGE_BPG_OFFSETS_0 0x90
+#define DSC_RC_RANGE_BPG_OFFSETS_1 0x94
+#define DSC_RC_RANGE_BPG_OFFSETS_2 0x98
+
+/* DPU_DSC_CTL register offsets */
+#define DSC_CTL                    0x00
+#define DSC_CFG                    0x04
+#define DSC_DATA_IN_SWAP           0x08
+#define DSC_CLK_CTRL               0x0C
+
+static inline int _dsc_calc_ob_max_addr(struct dpu_hw_dsc *hw_dsc, int num_ss)
+{
+	int max_addr = 2400 / num_ss;
+
+	if (hw_dsc->caps->features & BIT(DPU_DSC_NATIVE_422_EN))
+		max_addr /= 2;
+
+	return max_addr - 1;
+};
+
+static inline void dpu_hw_dsc_disable_1_2(struct dpu_hw_dsc *hw_dsc)
+{
+	struct dpu_hw_blk_reg_map *hw;
+	u32 offset;
+
+	if (!hw_dsc)
+		return;
+
+	hw = &hw_dsc->hw;
+	offset = hw_dsc->caps->sblk->ctl.base;
+	DPU_REG_WRITE(hw, offset + DSC_CFG, 0);
+
+	offset = hw_dsc->caps->sblk->enc.base;
+	DPU_REG_WRITE(hw, offset + ENC_DF_CTRL, 0);
+	DPU_REG_WRITE(hw, offset + DSC_MAIN_CONF, 0);
+}
+
+static inline void dpu_hw_dsc_config_1_2(struct dpu_hw_dsc *hw_dsc,
+			      struct drm_dsc_config *dsc,
+			      u32 mode,
+			      u32 initial_lines)
+{
+	struct dpu_hw_blk_reg_map *hw;
+	u32 offset;
+	u32 data = 0;
+	u32 det_thresh_flatness;
+	u32 num_active_ss_per_enc;
+	u32 bpp;
+
+	if (!hw_dsc || !dsc)
+		return;
+
+	hw = &hw_dsc->hw;
+
+	offset = hw_dsc->caps->sblk->enc.base;
+
+	if (mode & DSC_MODE_SPLIT_PANEL)
+		data |= BIT(0);
+
+	if (mode & DSC_MODE_MULTIPLEX)
+		data |= BIT(1);
+
+	num_active_ss_per_enc = dsc->slice_count;
+	if (mode & DSC_MODE_MULTIPLEX)
+		num_active_ss_per_enc = dsc->slice_count >> 1;
+
+	data |= (num_active_ss_per_enc & 0x3) << 7;
+
+	DPU_REG_WRITE(hw, DSC_CMN_MAIN_CNF, data);
+
+	data = (initial_lines & 0xff);
+
+	if (mode & DSC_MODE_VIDEO)
+		data |= BIT(9);
+
+	data |= (_dsc_calc_ob_max_addr(hw_dsc, num_active_ss_per_enc) << 18);
+
+	DPU_REG_WRITE(hw, offset + ENC_DF_CTRL, data);
+
+	data = (dsc->dsc_version_minor & 0xf) << 28;
+	if (dsc->dsc_version_minor == 0x2) {
+		if (dsc->native_422)
+			data |= BIT(22);
+		if (dsc->native_420)
+			data |= BIT(21);
+	}
+
+	bpp = dsc->bits_per_pixel;
+	/* as per hw requirement bpp should be programmed
+	 * twice the actual value in case of 420 or 422 encoding
+	 */
+	if (dsc->native_422 || dsc->native_420)
+		bpp = 2 * bpp;
+	data |= (dsc->block_pred_enable ? 1 : 0) << 20;
+	data |= bpp << 10;
+	data |= (dsc->line_buf_depth & 0xf) << 6;
+	data |= dsc->convert_rgb << 4;
+	data |= dsc->bits_per_component & 0xf;
+
+	DPU_REG_WRITE(hw, offset + DSC_MAIN_CONF, data);
+
+	data = (dsc->pic_width & 0xffff) |
+		((dsc->pic_height & 0xffff) << 16);
+
+	DPU_REG_WRITE(hw, offset + DSC_PICTURE_SIZE, data);
+
+	data = (dsc->slice_width & 0xffff) |
+		((dsc->slice_height & 0xffff) << 16);
+
+	DPU_REG_WRITE(hw, offset + DSC_SLICE_SIZE, data);
+
+	DPU_REG_WRITE(hw, offset + DSC_MISC_SIZE,
+			(dsc->slice_chunk_size) & 0xffff);
+
+	data = (dsc->initial_xmit_delay & 0xffff) |
+		((dsc->initial_dec_delay & 0xffff) << 16);
+
+	DPU_REG_WRITE(hw, offset + DSC_HRD_DELAYS, data);
+
+	DPU_REG_WRITE(hw, offset + DSC_RC_SCALE,
+			dsc->initial_scale_value & 0x3f);
+
+	data = (dsc->scale_increment_interval & 0xffff) |
+		((dsc->scale_decrement_interval & 0x7ff) << 16);
+
+	DPU_REG_WRITE(hw, offset + DSC_RC_SCALE_INC_DEC, data);
+
+	data = (dsc->first_line_bpg_offset & 0x1f) |
+		((dsc->second_line_bpg_offset & 0x1f) << 5);
+
+	DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_1, data);
+
+	data = (dsc->nfl_bpg_offset & 0xffff) |
+		((dsc->slice_bpg_offset & 0xffff) << 16);
+
+	DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_2, data);
+
+	data = (dsc->initial_offset & 0xffff) |
+		((dsc->final_offset & 0xffff) << 16);
+
+	DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_3, data);
+
+	data = (dsc->nsl_bpg_offset & 0xffff) |
+		((dsc->second_line_offset_adj & 0xffff) << 16);
+
+	DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_4, data);
+
+	data = (dsc->flatness_min_qp & 0x1f);
+	data |= (dsc->flatness_max_qp & 0x1f) << 5;
+
+	det_thresh_flatness = drm_dsc_calculate_flatness_det_thresh(dsc);
+	data |= (det_thresh_flatness & 0xff) << 10;
+
+	DPU_REG_WRITE(hw, offset + DSC_FLATNESS_QP, data);
+
+	DPU_REG_WRITE(hw, offset + DSC_RC_MODEL_SIZE,
+			(dsc->rc_model_size) & 0xffff);
+
+	data = dsc->rc_edge_factor & 0xf;
+	data |= (dsc->rc_quant_incr_limit0 & 0x1f) << 8;
+	data |= (dsc->rc_quant_incr_limit1 & 0x1f) << 13;
+	data |= (dsc->rc_tgt_offset_high & 0xf) << 20;
+	data |= (dsc->rc_tgt_offset_low & 0xf) << 24;
+
+	DPU_REG_WRITE(hw, offset + DSC_RC_CONFIG, data);
+
+	/* program the dsc wrapper */
+	offset = hw_dsc->caps->sblk->ctl.base;
+
+	data = BIT(0); /* encoder enable */
+	if (dsc->native_422)
+		data |= BIT(8);
+	else if (dsc->native_420)
+		data |= BIT(9);
+	if (!dsc->convert_rgb)
+		data |= BIT(10);
+	if (dsc->bits_per_component == 8)
+		data |= BIT(11);
+	if (mode & DSC_MODE_SPLIT_PANEL)
+		data |= BIT(12);
+	if (mode & DSC_MODE_MULTIPLEX)
+		data |= BIT(13);
+	if (!(mode & DSC_MODE_VIDEO))
+		data |= BIT(17);
+
+	DPU_REG_WRITE(hw, offset + DSC_CFG, data);
+}
+
+static inline void dpu_hw_dsc_config_thresh_1_2(struct dpu_hw_dsc *hw_dsc,
+					struct drm_dsc_config *dsc)
+{
+	struct dpu_hw_blk_reg_map *hw;
+	u32 offset;
+	struct drm_dsc_rc_range_parameters *rc;
+
+	if (!hw_dsc || !dsc)
+		return;
+
+	offset = hw_dsc->caps->sblk->enc.base;
+
+	hw = &hw_dsc->hw;
+
+	rc = dsc->rc_range_params;
+
+	/*
+	 * With BUF_THRESH -- 14 in total
+	 * each register contains 4 thresh values with the last register
+	 * containing only 2 thresh values
+	 */
+	DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_0,
+					(dsc->rc_buf_thresh[0] << 0) |
+					(dsc->rc_buf_thresh[1] << 8) |
+					(dsc->rc_buf_thresh[2] << 16) |
+					(dsc->rc_buf_thresh[3] << 24));
+	DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_1,
+					(dsc->rc_buf_thresh[4] << 0) |
+					(dsc->rc_buf_thresh[5] << 8) |
+					(dsc->rc_buf_thresh[6] << 16) |
+					(dsc->rc_buf_thresh[7] << 24));
+	DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_2,
+					(dsc->rc_buf_thresh[8] << 0) |
+					(dsc->rc_buf_thresh[9] << 8) |
+					(dsc->rc_buf_thresh[10] << 16) |
+					(dsc->rc_buf_thresh[11] << 24));
+	DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_3,
+					(dsc->rc_buf_thresh[12] << 0) |
+					(dsc->rc_buf_thresh[13] << 8));
+
+	/*
+	 * with min/max_QP -- 5 bits each
+	 * each register contains 5 min_qp or max_qp for total of 15
+	 *
+	 * With BPG_OFFSET -- 6 bits each
+	 * each register contains 5 BPG_offset for total of 15
+	 */
+	DPU_REG_WRITE(hw, offset + DSC_RC_MIN_QP_0,
+					(rc[0].range_min_qp << 0) |
+					(rc[1].range_min_qp << 5) |
+					(rc[2].range_min_qp << 10) |
+					(rc[3].range_min_qp << 15) |
+					(rc[4].range_min_qp << 20));
+	DPU_REG_WRITE(hw, offset + DSC_RC_MAX_QP_0,
+					(rc[0].range_max_qp << 0) |
+					(rc[1].range_max_qp << 5) |
+					(rc[2].range_max_qp << 10) |
+					(rc[3].range_max_qp << 15) |
+					(rc[4].range_max_qp << 20));
+	DPU_REG_WRITE(hw, offset + DSC_RC_RANGE_BPG_OFFSETS_0,
+					(rc[0].range_bpg_offset << 0) |
+					(rc[1].range_bpg_offset << 6) |
+					(rc[2].range_bpg_offset << 12) |
+					(rc[3].range_bpg_offset << 18) |
+					(rc[4].range_bpg_offset << 24));
+
+	DPU_REG_WRITE(hw, offset + DSC_RC_MIN_QP_1,
+					(rc[5].range_min_qp << 0) |
+					(rc[6].range_min_qp << 5) |
+					(rc[7].range_min_qp << 10) |
+					(rc[8].range_min_qp << 15) |
+					(rc[9].range_min_qp << 20));
+	DPU_REG_WRITE(hw, offset + DSC_RC_MAX_QP_1,
+					(rc[5].range_max_qp << 0) |
+					(rc[6].range_max_qp << 5) |
+					(rc[7].range_max_qp << 10) |
+					(rc[8].range_max_qp << 15) |
+					(rc[9].range_max_qp << 20));
+	DPU_REG_WRITE(hw, offset + DSC_RC_RANGE_BPG_OFFSETS_1,
+					(rc[5].range_bpg_offset << 0) |
+					(rc[6].range_bpg_offset << 6) |
+					(rc[7].range_bpg_offset << 12) |
+					(rc[8].range_bpg_offset << 18) |
+					(rc[9].range_bpg_offset << 24));
+
+	DPU_REG_WRITE(hw, offset + DSC_RC_MIN_QP_2,
+					(rc[10].range_min_qp << 0) |
+					(rc[11].range_min_qp << 5) |
+					(rc[12].range_min_qp << 10) |
+					(rc[13].range_min_qp << 15) |
+					(rc[14].range_min_qp << 20));
+	DPU_REG_WRITE(hw, offset + DSC_RC_MAX_QP_2,
+					(rc[10].range_max_qp << 0) |
+					(rc[11].range_max_qp << 5) |
+					(rc[12].range_max_qp << 10) |
+					(rc[13].range_max_qp << 15) |
+					(rc[14].range_max_qp << 20));
+	DPU_REG_WRITE(hw, offset + DSC_RC_RANGE_BPG_OFFSETS_2,
+					(rc[10].range_bpg_offset << 0) |
+					(rc[11].range_bpg_offset << 6) |
+					(rc[12].range_bpg_offset << 12) |
+					(rc[13].range_bpg_offset << 18) |
+					(rc[14].range_bpg_offset << 24));
+}
+
+static inline void dpu_hw_dsc_bind_pingpong_blk_1_2(
+		struct dpu_hw_dsc *hw_dsc,
+		const enum dpu_pingpong pp)
+{
+	struct dpu_hw_blk_reg_map *hw;
+	int offset;
+	int mux_cfg = 0xf; /* Disabled */
+
+	offset = hw_dsc->caps->sblk->ctl.base;
+
+	hw = &hw_dsc->hw;
+	if (pp)
+		mux_cfg = (pp - PINGPONG_0) & 0x7;
+
+	DPU_REG_WRITE(hw, offset + DSC_CTL, mux_cfg);
+}
+
+static void _setup_dcs_ops_1_2(struct dpu_hw_dsc_ops *ops,
+		const unsigned long features)
+{
+	ops->dsc_disable = dpu_hw_dsc_disable_1_2;
+	ops->dsc_config = dpu_hw_dsc_config_1_2;
+	ops->dsc_config_thresh = dpu_hw_dsc_config_thresh_1_2;
+	ops->dsc_bind_pingpong_blk = dpu_hw_dsc_bind_pingpong_blk_1_2;
+}
+
+struct dpu_hw_dsc *dpu_hw_dsc_init_1_2(const struct dpu_dsc_cfg *cfg,
+				   void __iomem *addr)
+{
+	struct dpu_hw_dsc *c;
+
+	c = kzalloc(sizeof(*c), GFP_KERNEL);
+	if (!c)
+		return ERR_PTR(-ENOMEM);
+
+	c->hw.blk_addr = addr + cfg->base;
+	c->hw.log_mask = DPU_DBG_MASK_DSC;
+
+	c->idx = cfg->id;
+	c->caps = cfg;
+	_setup_dcs_ops_1_2(&c->ops, c->caps->features);
+
+	return c;
+}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
index f0fc704..502dd60 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
@@ -1,6 +1,7 @@ 
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #define pr_fmt(fmt)	"[drm:%s] " fmt, __func__
@@ -246,7 +247,11 @@  int dpu_rm_init(struct dpu_rm *rm,
 		struct dpu_hw_dsc *hw;
 		const struct dpu_dsc_cfg *dsc = &cat->dsc[i];
 
-		hw = dpu_hw_dsc_init(dsc, mmio);
+		if (test_bit(DPU_DSC_HW_REV_1_2, &dsc->features))
+			hw = dpu_hw_dsc_init_1_2(dsc, mmio);
+		else
+			hw = dpu_hw_dsc_init(dsc, mmio);
+
 		if (IS_ERR_OR_NULL(hw)) {
 			rc = PTR_ERR(hw);
 			DPU_ERROR("failed dsc object creation: err %d\n", rc);