| Message ID | 20230505-fxtec-pro1x-support-v3-2-0c9c7f58b205@riseup.net |
|---|---|
| State | Accepted |
| Commit | 0e59d9e210912e037ec28bd057d06481100f0ba5 |
| Headers | show |
| Series | Add F(x)tec Pro1X (QX1050) DTS | expand |
On 13.05.2023 03:05, Dang Huynh wrote: > The F(x)tec Pro1X is a mobile phone released by FX Technologies Ltd > in 2022. > > The phone is exactly the same as the Pro1 released in 2019 with some > changes: > - MSM8998 -> SM6115 > - Camera button is no longer multistate > - Only one 48MP back camera > - A new keyboard layout picked by the community. > > This commit has the following features working: > - Display (using simplefb) > - UFS > - Power and volume buttons > - Pinctrl > - RPM Regulators > - USB (Device Mode) > > To get a successful boot run: > > cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/\ > sm6115-fxtec-pro1x.dtb > .Image.gz-dtb > > mkbootimg --kernel .Image.gz-dtb \ > --ramdisk initrd.img \ > --base 0x0 \ > --kernel_offset 0x8000 \ > --ramdisk_offset 0x1000000 \ > --second_offset 0xf00000 \ > --tags_offset 0x100 \ > --pagesize 4096 \ > --cmdline "CMDLINE HERE" \ > -o qx1050-boot.img > > fastboot flash boot qx1050-boot.img > fastboot erase dtbo > fastboot reboot > > Signed-off-by: Dang Huynh <danct12@riseup.net> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 250 ++++++++++++++++++++++++ > 2 files changed, 251 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index d42c59572ace..e311ba675f35 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -174,6 +174,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm6115-fxtec-pro1x.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb > diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts > new file mode 100644 > index 000000000000..3ce9875e932c > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts > @@ -0,0 +1,250 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > +/* > + * Copyright (c) 2023, Dang Huynh <danct12@riseup.net> > + */ > + > +/dts-v1/; > + > +#include "sm6115.dtsi" > +#include "pm6125.dtsi" > +#include <dt-bindings/arm/qcom,ids.h> > + > +/ { > + model = "F(x)tec Pro1X (QX1050)"; > + compatible = "fxtec,pro1x", "qcom,sm6115"; > + chassis-type = "handset"; > + > + qcom,msm-id = <QCOM_ID_SM6115 0x10000>; > + > + chosen { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + framebuffer0: framebuffer@5c000000 { > + compatible = "simple-framebuffer"; > + reg = <0x0 0x5c000000 0x0 (1080 * 2160 * 4)>; > + width = <1080>; > + height = <2160>; > + stride = <(1080 * 4)>; > + format = "a8r8g8b8"; > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + pinctrl-0 = <&vol_up_n>; > + pinctrl-names = "default"; > + > + key-volume-up { > + label = "Volume Up"; > + linux,code = <KEY_VOLUMEUP>; > + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; > + debounce-interval = <15>; > + linux,can-disable; > + gpio-key,wakeup; > + }; > + }; > +}; > + > +&dispcc { > + /* HACK: disable until a panel driver is ready to retain simplefb */ > + status = "disabled"; > +}; > + > +&pm6125_gpios { > + vol_up_n: vol-up-n-state { > + pins = "gpio5"; > + function = "normal"; > + power-source = <0>; > + bias-pull-up; > + input-enable; > + }; > +}; > + > +&pon_pwrkey { > + status = "okay"; > +}; > + > +&pon_resin { > + linux,code = <KEY_VOLUMEDOWN>; > + status = "okay"; > +}; > + > +&rpm_requests { > + regulators-0 { > + compatible = "qcom,rpm-pm6125-regulators"; > + > + pm6125_s6a: s6 { > + regulator-min-microvolt = <304000>; > + regulator-max-microvolt = <1456000>; > + }; > + > + pm6125_s7a: s7 { > + regulator-min-microvolt = <1280000>; > + regulator-max-microvolt = <2040000>; > + }; > + > + pm6125_s8a: s8 { > + regulator-min-microvolt = <1064000>; > + regulator-max-microvolt = <1304000>; > + }; > + > + pm6125_l1a: l1 { > + regulator-min-microvolt = <952000>; > + regulator-max-microvolt = <1152000>; > + }; > + > + pm6125_l4a: l4 { > + regulator-min-microvolt = <488000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + pm6125_l5a: l5 { > + regulator-min-microvolt = <1648000>; > + regulator-max-microvolt = <3056000>; > + }; > + > + pm6125_l6a: l6 { > + regulator-min-microvolt = <576000>; > + regulator-max-microvolt = <656000>; > + }; > + > + pm6125_l7a: l7 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1304000>; > + }; > + > + pm6125_l8a: l8 { > + regulator-min-microvolt = <400000>; > + regulator-max-microvolt = <728000>; > + }; > + > + pm6125_l9a: l9 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2000000>; > + }; > + > + pm6125_l10a: l10 { > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <1904000>; > + }; > + > + pm6125_l11a: l11 { > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <1952000>; > + regulator-allow-set-load; > + }; > + > + pm6125_l12a: l12 { > + regulator-min-microvolt = <1624000>; > + regulator-max-microvolt = <1984000>; > + }; > + > + pm6125_l13a: l13 { > + regulator-min-microvolt = <1504000>; > + regulator-max-microvolt = <1952000>; > + }; > + > + pm6125_l14a: l14 { > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <1904000>; > + }; > + > + pm6125_l15a: l15 { > + regulator-min-microvolt = <2920000>; > + regulator-max-microvolt = <3232000>; > + }; > + > + pm6125_l16a: l16 { > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <1904000>; > + }; > + > + pm6125_l17a: l17 { > + regulator-min-microvolt = <1152000>; > + regulator-max-microvolt = <1384000>; > + }; > + > + pm6125_l18a: l18 { > + regulator-min-microvolt = <1104000>; > + regulator-max-microvolt = <1312000>; > + }; > + > + pm6125_l19a: l19 { > + regulator-min-microvolt = <1624000>; > + regulator-max-microvolt = <3304000>; > + }; > + > + pm6125_l20a: l20 { > + regulator-min-microvolt = <1624000>; > + regulator-max-microvolt = <3304000>; > + }; > + > + pm6125_l21a: l21 { > + regulator-min-microvolt = <2400000>; > + regulator-max-microvolt = <3600000>; > + }; > + > + pm6125_l22a: l22 { > + regulator-min-microvolt = <2952000>; > + regulator-max-microvolt = <3304000>; > + }; > + > + pm6125_l23a: l23 { > + regulator-min-microvolt = <3200000>; > + regulator-max-microvolt = <3400000>; > + }; > + > + pm6125_l24a: l24 { > + regulator-min-microvolt = <2704000>; > + regulator-max-microvolt = <3600000>; > + regulator-allow-set-load; > + }; > + }; > +}; > + > +&sleep_clk { > + clock-frequency = <32764>; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <0 4>, <14 4>; > +}; > + > +&ufs_mem_hc { > + vcc-supply = <&pm6125_l24a>; > + vcc-max-microamp = <600000>; > + vccq2-supply = <&pm6125_l11a>; > + vccq2-max-microamp = <600000>; > + status = "okay"; > +}; > + > +&ufs_mem_phy { > + vdda-phy-supply = <&pm6125_l4a>; > + vdda-pll-supply = <&pm6125_l12a>; > + vddp-ref-clk-supply = <&pm6125_l18a>; > + status = "okay"; > +}; > + > +&usb { > + status = "okay"; > +}; > + > +&usb_dwc3 { > + maximum-speed = "high-speed"; > + dr_mode = "peripheral"; > +}; > + > +&usb_hsphy { > + vdd-supply = <&pm6125_l4a>; > + vdda-pll-supply = <&pm6125_l12a>; > + vdda-phy-dpdm-supply = <&pm6125_l15a>; > + status = "okay"; > +}; > + > +&xo_board { > + clock-frequency = <19200000>; > +}; >
On 13/05/2023 01:05, Dang Huynh wrote: > The F(x)tec Pro1X is a mobile phone released by FX Technologies Ltd > in 2022. > > The phone is exactly the same as the Pro1 released in 2019 with some > changes: > - MSM8998 -> SM6115 > - Camera button is no longer multistate > - Only one 48MP back camera > - A new keyboard layout picked by the community. > > This commit has the following features working: > - Display (using simplefb) > - UFS > - Power and volume buttons > - Pinctrl > - RPM Regulators > - USB (Device Mode) > > To get a successful boot run: > > cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/\ > sm6115-fxtec-pro1x.dtb > .Image.gz-dtb > > mkbootimg --kernel .Image.gz-dtb \ > --ramdisk initrd.img \ > --base 0x0 \ > --kernel_offset 0x8000 \ > --ramdisk_offset 0x1000000 \ > --second_offset 0xf00000 \ > --tags_offset 0x100 \ > --pagesize 4096 \ > --cmdline "CMDLINE HERE" \ > -o qx1050-boot.img > > fastboot flash boot qx1050-boot.img > fastboot erase dtbo > fastboot reboot > > Signed-off-by: Dang Huynh <danct12@riseup.net> Thanks Dang, hopefully we get support for that sweet sweet physical keyboard soon! Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 250 ++++++++++++++++++++++++ > 2 files changed, 251 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index d42c59572ace..e311ba675f35 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -174,6 +174,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm6115-fxtec-pro1x.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb > diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts > new file mode 100644 > index 000000000000..3ce9875e932c > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts > @@ -0,0 +1,250 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > +/* > + * Copyright (c) 2023, Dang Huynh <danct12@riseup.net> > + */ > + > +/dts-v1/; > + > +#include "sm6115.dtsi" > +#include "pm6125.dtsi" > +#include <dt-bindings/arm/qcom,ids.h> > + > +/ { > + model = "F(x)tec Pro1X (QX1050)"; > + compatible = "fxtec,pro1x", "qcom,sm6115"; > + chassis-type = "handset"; > + > + qcom,msm-id = <QCOM_ID_SM6115 0x10000>; > + > + chosen { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + framebuffer0: framebuffer@5c000000 { > + compatible = "simple-framebuffer"; > + reg = <0x0 0x5c000000 0x0 (1080 * 2160 * 4)>; > + width = <1080>; > + height = <2160>; > + stride = <(1080 * 4)>; > + format = "a8r8g8b8"; > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + pinctrl-0 = <&vol_up_n>; > + pinctrl-names = "default"; > + > + key-volume-up { > + label = "Volume Up"; > + linux,code = <KEY_VOLUMEUP>; > + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; > + debounce-interval = <15>; > + linux,can-disable; > + gpio-key,wakeup; > + }; > + }; > +}; > + > +&dispcc { > + /* HACK: disable until a panel driver is ready to retain simplefb */ > + status = "disabled"; > +}; > + > +&pm6125_gpios { > + vol_up_n: vol-up-n-state { > + pins = "gpio5"; > + function = "normal"; > + power-source = <0>; > + bias-pull-up; > + input-enable; > + }; > +}; > + > +&pon_pwrkey { > + status = "okay"; > +}; > + > +&pon_resin { > + linux,code = <KEY_VOLUMEDOWN>; > + status = "okay"; > +}; > + > +&rpm_requests { > + regulators-0 { > + compatible = "qcom,rpm-pm6125-regulators"; > + > + pm6125_s6a: s6 { > + regulator-min-microvolt = <304000>; > + regulator-max-microvolt = <1456000>; > + }; > + > + pm6125_s7a: s7 { > + regulator-min-microvolt = <1280000>; > + regulator-max-microvolt = <2040000>; > + }; > + > + pm6125_s8a: s8 { > + regulator-min-microvolt = <1064000>; > + regulator-max-microvolt = <1304000>; > + }; > + > + pm6125_l1a: l1 { > + regulator-min-microvolt = <952000>; > + regulator-max-microvolt = <1152000>; > + }; > + > + pm6125_l4a: l4 { > + regulator-min-microvolt = <488000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + pm6125_l5a: l5 { > + regulator-min-microvolt = <1648000>; > + regulator-max-microvolt = <3056000>; > + }; > + > + pm6125_l6a: l6 { > + regulator-min-microvolt = <576000>; > + regulator-max-microvolt = <656000>; > + }; > + > + pm6125_l7a: l7 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1304000>; > + }; > + > + pm6125_l8a: l8 { > + regulator-min-microvolt = <400000>; > + regulator-max-microvolt = <728000>; > + }; > + > + pm6125_l9a: l9 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2000000>; > + }; > + > + pm6125_l10a: l10 { > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <1904000>; > + }; > + > + pm6125_l11a: l11 { > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <1952000>; > + regulator-allow-set-load; > + }; > + > + pm6125_l12a: l12 { > + regulator-min-microvolt = <1624000>; > + regulator-max-microvolt = <1984000>; > + }; > + > + pm6125_l13a: l13 { > + regulator-min-microvolt = <1504000>; > + regulator-max-microvolt = <1952000>; > + }; > + > + pm6125_l14a: l14 { > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <1904000>; > + }; > + > + pm6125_l15a: l15 { > + regulator-min-microvolt = <2920000>; > + regulator-max-microvolt = <3232000>; > + }; > + > + pm6125_l16a: l16 { > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <1904000>; > + }; > + > + pm6125_l17a: l17 { > + regulator-min-microvolt = <1152000>; > + regulator-max-microvolt = <1384000>; > + }; > + > + pm6125_l18a: l18 { > + regulator-min-microvolt = <1104000>; > + regulator-max-microvolt = <1312000>; > + }; > + > + pm6125_l19a: l19 { > + regulator-min-microvolt = <1624000>; > + regulator-max-microvolt = <3304000>; > + }; > + > + pm6125_l20a: l20 { > + regulator-min-microvolt = <1624000>; > + regulator-max-microvolt = <3304000>; > + }; > + > + pm6125_l21a: l21 { > + regulator-min-microvolt = <2400000>; > + regulator-max-microvolt = <3600000>; > + }; > + > + pm6125_l22a: l22 { > + regulator-min-microvolt = <2952000>; > + regulator-max-microvolt = <3304000>; > + }; > + > + pm6125_l23a: l23 { > + regulator-min-microvolt = <3200000>; > + regulator-max-microvolt = <3400000>; > + }; > + > + pm6125_l24a: l24 { > + regulator-min-microvolt = <2704000>; > + regulator-max-microvolt = <3600000>; > + regulator-allow-set-load; > + }; > + }; > +}; > + > +&sleep_clk { > + clock-frequency = <32764>; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <0 4>, <14 4>; > +}; > + > +&ufs_mem_hc { > + vcc-supply = <&pm6125_l24a>; > + vcc-max-microamp = <600000>; > + vccq2-supply = <&pm6125_l11a>; > + vccq2-max-microamp = <600000>; > + status = "okay"; > +}; > + > +&ufs_mem_phy { > + vdda-phy-supply = <&pm6125_l4a>; > + vdda-pll-supply = <&pm6125_l12a>; > + vddp-ref-clk-supply = <&pm6125_l18a>; > + status = "okay"; > +}; > + > +&usb { > + status = "okay"; > +}; > + > +&usb_dwc3 { > + maximum-speed = "high-speed"; > + dr_mode = "peripheral"; > +}; > + > +&usb_hsphy { > + vdd-supply = <&pm6125_l4a>; > + vdda-pll-supply = <&pm6125_l12a>; > + vdda-phy-dpdm-supply = <&pm6125_l15a>; > + status = "okay"; > +}; > + > +&xo_board { > + clock-frequency = <19200000>; > +}; >
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index d42c59572ace..e311ba675f35 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -174,6 +174,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6115-fxtec-pro1x.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts new file mode 100644 index 000000000000..3ce9875e932c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Dang Huynh <danct12@riseup.net> + */ + +/dts-v1/; + +#include "sm6115.dtsi" +#include "pm6125.dtsi" +#include <dt-bindings/arm/qcom,ids.h> + +/ { + model = "F(x)tec Pro1X (QX1050)"; + compatible = "fxtec,pro1x", "qcom,sm6115"; + chassis-type = "handset"; + + qcom,msm-id = <QCOM_ID_SM6115 0x10000>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@5c000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x5c000000 0x0 (1080 * 2160 * 4)>; + width = <1080>; + height = <2160>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; + }; +}; + +&dispcc { + /* HACK: disable until a panel driver is ready to retain simplefb */ + status = "disabled"; +}; + +&pm6125_gpios { + vol_up_n: vol-up-n-state { + pins = "gpio5"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + pm6125_s6a: s6 { + regulator-min-microvolt = <304000>; + regulator-max-microvolt = <1456000>; + }; + + pm6125_s7a: s7 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <2040000>; + }; + + pm6125_s8a: s8 { + regulator-min-microvolt = <1064000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l1a: l1 { + regulator-min-microvolt = <952000>; + regulator-max-microvolt = <1152000>; + }; + + pm6125_l4a: l4 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <1000000>; + }; + + pm6125_l5a: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3056000>; + }; + + pm6125_l6a: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + pm6125_l7a: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l8a: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + pm6125_l9a: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + pm6125_l10a: l10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l11a: l11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1952000>; + regulator-allow-set-load; + }; + + pm6125_l12a: l12 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <1984000>; + }; + + pm6125_l13a: l13 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1952000>; + }; + + pm6125_l14a: l14 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l15a: l15 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + }; + + pm6125_l16a: l16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l17a: l17 { + regulator-min-microvolt = <1152000>; + regulator-max-microvolt = <1384000>; + }; + + pm6125_l18a: l18 { + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1312000>; + }; + + pm6125_l19a: l19 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l20a: l20 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l21a: l21 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3600000>; + }; + + pm6125_l22a: l22 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l23a: l23 { + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3400000>; + }; + + pm6125_l24a: l24 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3600000>; + regulator-allow-set-load; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <14 4>; +}; + +&ufs_mem_hc { + vcc-supply = <&pm6125_l24a>; + vcc-max-microamp = <600000>; + vccq2-supply = <&pm6125_l11a>; + vccq2-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&pm6125_l4a>; + vdda-pll-supply = <&pm6125_l12a>; + vddp-ref-clk-supply = <&pm6125_l18a>; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + maximum-speed = "high-speed"; + dr_mode = "peripheral"; +}; + +&usb_hsphy { + vdd-supply = <&pm6125_l4a>; + vdda-pll-supply = <&pm6125_l12a>; + vdda-phy-dpdm-supply = <&pm6125_l15a>; + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +};
The F(x)tec Pro1X is a mobile phone released by FX Technologies Ltd in 2022. The phone is exactly the same as the Pro1 released in 2019 with some changes: - MSM8998 -> SM6115 - Camera button is no longer multistate - Only one 48MP back camera - A new keyboard layout picked by the community. This commit has the following features working: - Display (using simplefb) - UFS - Power and volume buttons - Pinctrl - RPM Regulators - USB (Device Mode) To get a successful boot run: cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/\ sm6115-fxtec-pro1x.dtb > .Image.gz-dtb mkbootimg --kernel .Image.gz-dtb \ --ramdisk initrd.img \ --base 0x0 \ --kernel_offset 0x8000 \ --ramdisk_offset 0x1000000 \ --second_offset 0xf00000 \ --tags_offset 0x100 \ --pagesize 4096 \ --cmdline "CMDLINE HERE" \ -o qx1050-boot.img fastboot flash boot qx1050-boot.img fastboot erase dtbo fastboot reboot Signed-off-by: Dang Huynh <danct12@riseup.net> --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 250 ++++++++++++++++++++++++ 2 files changed, 251 insertions(+)