diff mbox series

[1/3] thermal: qoriq_thermal: No need to program site adjustment register

Message ID 20230516083746.63436-2-peng.fan@oss.nxp.com
State New
Headers show
Series thermal: qoriq_thermal: support TMU 2.1 | expand

Commit Message

Peng Fan (OSS) May 16, 2023, 8:37 a.m. UTC
From: Pankit Garg <pankit.garg@nxp.com>

No need to program site adjustment register, as programming
these registers do not give accurate value and also these
registers are not mentioned in Reference Manual.

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/thermal/qoriq_thermal.c | 4 ----
 1 file changed, 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index e58756323457..b806a0929459 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -208,8 +208,6 @@  static int qoriq_tmu_calibration(struct device *dev,
 
 static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
 {
-	int i;
-
 	/* Disable interrupt, using polling instead */
 	regmap_write(data->regmap, REGS_TIER, TIER_DISABLE);
 
@@ -220,8 +218,6 @@  static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
 	} else {
 		regmap_write(data->regmap, REGS_V2_TMTMIR, TMTMIR_DEFAULT);
 		regmap_write(data->regmap, REGS_V2_TEUMR(0), TEUMR0_V2);
-		for (i = 0; i < SITES_MAX; i++)
-			regmap_write(data->regmap, REGS_V2_TMSAR(i), TMSARA_V2);
 	}
 
 	/* Disable monitoring */